Samson Expedition XP106 Portable PA System & Pyle Speaker Stand

1. 서론

This manual provides instructions for the Samson Expedition XP106 Rechargeable Portable PA system and the Pyle Universal Speaker Stand. The Samson XP106 is a versatile, all-in-one sound solution featuring Bluetooth connectivity and a built-in 4-channel mixer, suitable for various applications including presentations, performances, and outdoor events. The Pyle speaker stand offers stable support for your PA system.

Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent damage.

Figure 1: Samson Expedition XP106 Portable PA system with wired microphone and Pyle speaker stand.

2. 포함 사항

패키지에는 다음과 같은 구성 요소가 포함되어 있습니다.

• Samson Expedition XP106 Rechargeable Portable PA System (Gray)
• 유선 핸드헬드 다이나믹 마이크
• Pyle Universal Speaker Stand Mount Holder (Black)
• Power Adapter/Charging Cable for PA System

Figure 2: Samson Expedition XP106 Portable PA system with included wired microphone.

3. 설정

3.1 Pyle Universal Speaker Stand Assembly

1. 스피커 스탠드의 삼각대 다리를 완전히 펼쳐서 안정될 때까지 펴주세요.
2. Adjust the height of the telescoping center column to the desired level (between 40 and 71 inches).
3. Secure the height adjustment with the locking safety pin and tighten the knob-style tension locking mechanism. Ensure the stand is stable before placing any equipment on it.

Figure 3: Pyle Universal Speaker Stand in its assembled state.

Figure 4: Key features and components of the Pyle Universal Speaker Stand.

3.2 Samson XP106 PA System Placement

1. Carefully lift the Samson XP106 PA system and place it onto the 35mm compatible insert at the top of the assembled Pyle speaker stand.
2. Ensure the PA system is securely seated on the stand.

3.3 마이크 연결

1. Locate the XLR-1/4 inch combo input on the rear panel of the XP106 PA system.
2. Connect the wired handheld dynamic microphone to one of the available input channels.

Figure 5: Rear panel of the Samson XP106 PA system, detailing input and control options.

3.4 전원 켜기 및 충전

1. Connect the power adapter to the DC 18V/3.5A input on the rear panel and plug it into a power outlet to charge the internal battery or operate the unit.
2. Flip the ON/OFF switch to the 'ON' position to power on the PA system.
3. The battery indicator light will show charging status. A full charge provides up to 20 hours of continuous use.

4. 운영

4.1 4채널 믹서 사용하기

The XP106 features a built-in 4-channel mixer. Each channel has independent volume control. Refer to Figure 5 for the layout of the rear panel controls.

• 채널 1 & 2: XLR-1/4 inch combo inputs for microphones or line-level instruments. Adjust gain using the respective knobs.
• 채널 3 : Line input (1/8 inch stereo) for connecting external audio devices.
• 채널 4 : 무선 오디오 스트리밍을 위한 블루투스 입력.
• USB Wireless Port: For connecting Samson's Stage XPD1 USB Digital Wireless System (sold separately).
• 라인 아웃: 1/4 inch output for connecting to another PA system or recording device.

4.2 블루투스 연결

1. Ensure the XP106 is powered on.
2. Press the Bluetooth pairing button on the rear panel (refer to Figure 5). The Bluetooth indicator light will flash.
3. On your smartphone or Bluetooth-enabled device, search for 'Samson XP106' in the Bluetooth settings.
4. Select 'Samson XP106' to pair. Once paired, the indicator light will glow solid blue.
5. Adjust the volume for the Bluetooth channel using its dedicated knob.

5. 유지관리

• 청소: Use a soft, dry cloth to clean the exterior surfaces of the PA system and speaker stand. Avoid abrasive cleaners or solvents.
• 저장: When not in use, store the PA system and speaker stand in a cool, dry place, away from direct sunlight and extreme temperatures.
• 배터리 관리 : For optimal battery life, avoid fully discharging the battery frequently. Recharge the unit regularly, even if not in use for extended periods.

6. 문제 해결

• 전원 없음: Ensure the power adapter is securely connected to both the PA system and a working power outlet. Check the ON/OFF switch. If operating on battery, ensure the battery is charged.
• 사운드 출력 없음: Verify all volume controls (master and individual channels) are turned up. Check microphone and input cable connections. Ensure the audio source is playing.
• 블루투스 페어링 문제: Ensure the PA system is in pairing mode (flashing blue light). Turn off and on Bluetooth on your device. Move closer to the PA system.
• 왜곡된 소리: Reduce input gain levels or master volume to prevent clipping (indicated by the 'PEAK' LED). Check cable connections for damage.
• Speaker Stand Instability: Ensure tripod legs are fully extended and the safety pin is engaged. Do not exceed the maximum weight load capacity of 132 lbs.

7. 사양

7.1 Samson Expedition XP106 PA System

• 출력 와트tage: 100 와트
• 스피커 구성: 2-way enclosure with 6-inch woofer and 1-inch high frequency driver
• 채널 수: 4
• 오디오 입력 : XLR, 1/4 inch, Aux (1/8 inch stereo)
• 연결 기술 : Bluetooth, USB (for wireless system)
• 전원: 배터리 구동(충전식)
• 배터리 수명: 최대 20시간(연속 사용)
• 색상: 회색

7.2 Pyle Universal Speaker Stand

• 높이 조정: 40 inches (minimum) to 71 inches (maximum)
• Speaker Insert Compatibility: 35mm(1.375인치)
• Maximum Weight Load Capacity: 최대 132파운드
• 건설: Rugged and durable metal
• 마치다: 광택 있는 검은색

Figure 6: Dimensions and tubing detail of the Pyle Universal Speaker Stand.

8. 안전 정보

• Do not expose the PA system to rain or moisture to avoid electric shock.
• Ensure proper ventilation around the PA system to prevent overheating.
• Always secure the speaker stand properly and ensure it is on a stable, level surface before mounting the PA system.
• Do not overload the speaker stand beyond its specified weight capacity (132 lbs).
• 청력 손상을 예방하려면 장시간 너무 높은 볼륨으로 듣지 마세요.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

9. 지원

For technical support, warranty information, or service inquiries, please contact Samson customer service. Refer to the official Samson web최신 연락처 정보와 지원 리소스를 제공하는 사이트입니다.

Samson Technologies: www.samsontech.com