소개
This manual provides essential information for the safe and efficient operation of your APC Smart-UPS SMT3000C 3000VA Uninterruptible Power Supply. Please read this manual thoroughly before installation and use.
중요 안전 지침
Please read and follow all safety instructions carefully to prevent injury or damage to the unit. Retain this manual for future reference.
- 전기 안전: UPS는 접지된 콘센트에만 연결하십시오. 접지 단자를 제거하지 마십시오.
- 배터리 안전: Batteries can present a risk of electrical shock and high short-circuit current. Observe proper polarity when connecting batteries.
- 설치: 무정전 전원 공급 장치(UPS)는 먼지, 부식성 연기 및 전도성 오염 물질이 없는 통제된 환경의 실내에 설치하십시오.
- 서비스: Refer all servicing to qualified service personnel. There are no user-serviceable parts inside the UPS.
패키지 내용
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer or APC.
- APC Smart-UPS SMT3000C Unit
- PowerChute Business Edition Software CD
- RS-232 케이블
- USB 케이블
- 이더넷 케이블
- 와이어 타이
- 청소 키트
그림 1: APC Smart-UPS SMT3000C unit shown with all included accessories: RS-232 cable, USB cable, Ethernet cable, wire ties, and a cleaning kit.
제품 끝view
The APC Smart-UPS SMT3000C is a Line Interactive Uninterruptible Power Supply designed to provide reliable power protection for your electronic equipment. It features Automatic Voltage Regulation (AVR) and SmartConnect for remote monitoring.
전면 패널
그림 2: 앞쪽 view of the APC Smart-UPS SMT3000C, displaying the control panel and LCD screen for status monitoring.
후면 패널
The rear panel provides all necessary connections for input power, protected outlets, and communication ports.
그림 3: 뒤쪽 view of the APC Smart-UPS SMT3000C, highlighting the NEMA 5-30P input, (8) NEMA 5-15R outputs, (2) NEMA 5-20R outputs, communication ports (RS-232, USB, Ethernet), and a circuit breaker.
- 입력 전력: NEMA 5-30P
- 출력 콘센트: (8) NEMA 5-15R, (2) NEMA 5-20R
- 통신 포트: RS-232, USB, Ethernet (for SmartConnect)
- 회로 차단기: 과부하 보호
설정
1. 배치
Place the UPS on a flat, stable surface in a cool, dry, and well-ventilated area. Ensure adequate clearance around the unit for proper airflow. Avoid direct sunlight, heat sources, and excessive moisture.
2. 배터리 연결
The UPS is shipped with the internal battery disconnected for safety. Follow these steps to connect the battery:
- Remove the front bezel of the UPS.
- Locate the battery connector.
- Firmly push the battery connector together until it clicks into place.
- 전면 베젤을 교체합니다.
3. 장비 연결
Connect your critical equipment (computers, servers, network devices) to the UPS output outlets. Ensure that the total load does not exceed the UPS capacity (2700W).
- 배터리 백업 및 서지 보호 콘센트: These outlets provide battery power during outages and surge protection. Connect critical equipment here.
4. 유틸리티 전원에 연결
Plug the UPS power cord (NEMA 5-30P) into a dedicated, grounded 120V wall outlet. Avoid using extension cords or surge strips with the UPS input.
5. 초기 파워업
Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the UPS to charge for at least 24 hours before relying on it for extended battery backup.
6. SmartConnect Setup
The APC SmartConnect feature allows for remote monitoring of your UPS. Connect an Ethernet cable from the UPS SmartConnect port to your network. Follow the instructions provided with the SmartConnect service to register your device and enable remote monitoring, automatic notifications, and firmware updates.
UPS 작동
전원 켜기/끄기
- 전원을 켜려면: 전면 패널의 전원 버튼을 디스플레이에 불이 들어올 때까지 길게 누르세요.
- 전원을 끄려면: 디스플레이가 꺼질 때까지 전원 버튼을 길게 누르세요.
자동 볼륨tage 규정(AVR)
UPS에는 자동 전압 조절 기능이 있습니다.tageRegulation(AVR)은 사소한 볼륨을 자동으로 수정합니다.tage fluctuations (sags and surges) without using battery power. This helps to preserve battery life and ensures a stable power supply to connected equipment.
런타임 정보
The APC Smart-UPS SMT3000C provides varying runtimes depending on the connected load:
- 50W Load: 약 563분
- 100W Load: 약 330분
- 200W Load: 약 172분
- 300W Load: 약 112분
- 400W Load: 약 81분
- 500W Load: 약 63분
- 600W Load: 약 51분
- 700W Load: 약 42.2분
- 800W Load: 약 35.7분
- 900W Load: 약 30.6분
- 1000W Load: 약 26.7분
- 1350W (Half Load): 약 17.5분
- 1400W Load: 약 16.6분
- 1600W Load: 약 13.5분
- 1800W Load: 약 11.2분
- 2000W Load: 약 9.4분
- 2500W Load: 약 6.1분
- 2700W (Full Load): 약 5.7분
PowerChute 비즈니스 에디션 소프트웨어
Install the PowerChute Business Edition software on your connected computer to enable safe system shutdown during extended power outages, monitor UPS status, and configure various settings. Connect the UPS to your computer using the provided USB or RS-232 cable.
유지
배터리 관리
The UPS batteries are designed for a specific lifespan. Factors such as ambient temperature, number of discharge cycles, and discharge depth affect battery life. Replace batteries when the UPS indicates a battery fault or when runtime significantly decreases.
- Perform regular self-tests (via the UPS display or PowerChute software) to assess battery health.
- Avoid operating the UPS in environments with high temperatures, as this can shorten battery life.
청소
Regularly clean the exterior of the UPS with a soft, dry cloth. Use the provided cleaning kit for gentle cleaning. Ensure the UPS is powered off and disconnected from utility power before cleaning. Do not use liquid or aerosol cleaners directly on the unit.
문제 해결
This section provides solutions to common issues you may encounter with your UPS. For more complex problems, contact APC technical support.
- UPS가 켜지지 않습니다. Ensure the battery is properly connected and the UPS is plugged into a live wall outlet. Check the input circuit breaker.
- UPS beeps continuously: This usually indicates an overload condition or a low battery. Reduce the connected load or allow the battery to charge.
- 연결된 장비는 정전 중에 전원이 차단됩니다.tage: The UPS may be overloaded, or the battery may be depleted or faulty. Verify the load and battery status.
- SmartConnect가 연결되지 않습니다: Ensure the Ethernet cable is securely connected and your network settings allow communication. Check the SmartConnect portal for device registration status.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SMT3000C |
| 용량 | 3000VA / 2700W |
| 입력 Voltage | 120 볼트 |
| 입력 연결 | NEMA 5-30P |
| 출력 연결 | (8) NEMA 5-15R, (2) NEMA 5-20R |
| 배터리 유형 | 납산 |
| 제품 치수 | 6 x 6 x 6 인치 |
| 품목 무게 | 124.9파운드 |
| 색상 | 검은색 |
| Energy Star 인증 | 예 |
보증 및 지원
APC provides a standard warranty for this product. For detailed warranty information, please refer to the warranty card included with your product or visit the official APC website. For technical support, product registration, or service inquiries, please contact APC customer support through their official channels.
The APC SmartConnect feature is free during the standard warranty period of the UPS, providing advanced support services and remote monitoring.
