사이클플러스 AL1

CYCPLUS 휴대용 타이어 공기 주입기/공기압축기 - 사용 설명서

모델: AL1 | 브랜드: CYCPLUS

소개

The CYCPLUS Portable Air Compressor is a versatile and efficient tool designed for quick and accurate inflation of various items, including car tires, motorcycle tires, e-bike tires, and sports balls. This 2025 Version inflator features a powerful 150PSI capacity, a digital tire pressure gauge with an accurate LCD display, and an integrated LED light for convenience. Its dual AC/DC power options ensure usability anywhere, anytime.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

Image showing all components included in the CYCPLUS Tire Inflator package: the inflator unit, two air hoses, various adapters, USB-C charging cable, and a canvas storage bag.

그림 1: 전체 패키지 내용

제품 특징

Image illustrating the 2X faster inflation efficiency of the CYCPLUS inflator, showing a tire being inflated with a digital display of 2.5 Bar.

Figure 2: Fast Inflation Capability

Image showing the dual power supply mode of the CYCPLUS inflator, with one image depicting cordless battery operation and another showing it powered by a 12V DC cigarette lighter.

그림 3: 이중 전원 공급 옵션

Image highlighting the 5-in-1 multi-functionality of the CYCPLUS air inflator, including tire pump, ball pump, pressure detector, power bank, and emergency light features.

Figure 4: Multi-functional Design

설정

  1. 기기 충전: Before first use, fully charge the inflator using the provided USB-C cable. Connect the USB-C end to the inflator and the USB-A end to a compatible USB power adapter (not included) or a 12V car cigarette lighter. The display will indicate charging status.
  2. 적절한 노즐을 선택하세요: Identify the correct nozzle or adapter for the item you wish to inflate (e.g., Presta adapter for some bike tires, needle adapter for balls, general nozzle for car tires).
  3. 공기 호스 부착: Screw the air hose securely onto the inflator's output port.

작동 지침

  1. 전원 켜기: Press the power button to turn on the inflator. The LCD display will light up, showing the current pressure.
  2. 압력 단위 선택: Press the 'U' button to cycle through available pressure units: PSI, kPa, BAR, and kg/cm².
  3. 목표 압력 설정: '+' 및 '-' 버튼을 사용하여 원하는 목표 압력을 조정하십시오.
  4. 항목에 연결: Securely attach the appropriate nozzle and air hose to the valve of the item you are inflating. Ensure a tight seal to prevent air leakage.
  5. 인플레이션 시작: Press the power button again to begin inflation. The inflator will automatically stop once the preset target pressure is reached.
  6. 진행 상황 모니터링: The digital display will show the real-time pressure during inflation.
  7. 연결 해제: Once inflation is complete, disconnect the air hose from the item and then from the inflator.
  8. LED 조명 기능: To activate the LED light, press and hold the light button. Press again to cycle through modes (e.g., steady, flashing) or turn off.
  9. 전원 은행 기능: To use as a power bank, connect your device to the USB-C port on the inflator using your device's charging cable.

Video 1: Demonstration of the CYCPLUS Portable Air Compressor in use, highlighting its features and operation.

유지

문제 해결

문제가능한 원인해결책
인플레이터가 켜지지 않습니다.배터리가 부족합니다. 전원 버튼을 제대로 누르지 않았습니다.Charge the inflator fully. Press and hold the power button for a few seconds.
인플레이션이 느리게 진행되거나 목표치에 도달하지 못하고 있습니다.Air leakage from connection; Low battery; Item requires higher pressure than set.Ensure hose and nozzle are securely attached. Recharge the inflator. Adjust target pressure.
Display is inaccurate.Sensor calibration issue; Extreme temperature.Ensure the device is used within recommended temperature ranges. If persistent, contact customer support.
장치가 과열되었습니다.Continuous long-term operation.Allow the device to cool down before further use. Avoid prolonged continuous operation.

명세서

보증 및 지원

CYCPLUS products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official CYCPLUS web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For any issues, please feel free to contact us via the after-sale email provided in your purchase documentation.

관련 문서 - AL1

사전view CYCPLUS A8 휴대용 공기 펌프 사용 설명서
CYCPLUS A8 휴대용 공기 펌프 전기 압축기 타이어 인플레이터에 대한 포괄적인 사용 설명서로, 기능, 작동 및 유지관리에 대한 자세한 내용을 설명합니다.
사전view Cycplus A10 휴대용 공기 펌프 사용 설명서 및 사양
Cycplus A10 휴대용 공기 펌프의 포괄적인 사용 설명서로, 기능, 작동, 충전, 안전 수칙 및 기술 사양을 자세히 설명합니다. 자동차, 자전거, 공 등 다양한 용도에 맞는 다양한 밸브 유형 및 압력 설정 방법을 안내합니다.
사전view CYCPLUS A14 휴대용 디지털 타이어 공기압 주입기 - 사용 설명서
CYCPLUS A14 휴대용 디지털 타이어 공기 주입기 사용 설명서입니다. 제품 사양, 사전 설정 모드, 작동 방법, 배터리 충전 방법, 자전거, 오토바이, 자동차 및 공에 대한 안전 수칙을 포함합니다.
사전view CYCPLUS A2 스마트 타이어 인플레이터 사용 설명서 및 사양
CYCPLUS A2 스마트 타이어 인플레이터에 대한 포괄적인 사용 설명서와 기술 사양으로, 작동, 충전, 안전 및 제품 세부 정보 등이 포함되어 있습니다.
사전view CYCPLUS A2 스마트 타이어 인플레이터 사용 설명서
CYCPLUS A2 스마트 타이어 인플레이터의 사용 설명서에는 기능, 작동, 사양 및 유지관리에 대한 자세한 설명이 나와 있습니다.
사전view CYCPLUS AS2 Pro 자전거 타이어 인플레이터 사용 설명서
CYCPLUS AS2 Pro 자전거 타이어 인플레이터의 설치, 작동, 사양 및 유지 관리에 대한 포괄적인 사용 설명서입니다. 자전거 타이어에 효율적이고 안전하게 공기를 주입하는 방법을 알아보세요.