소개
Welcome to the user manual for your GOLUMUP ZG1002 Hydroponics Growing System Kit. This system is designed to provide an efficient and convenient way to grow herbs, vegetables, and flowers indoors without soil. Please read this manual thoroughly before operating your device to ensure proper setup, optimal performance, and longevity.
제품 구성 요소
Before assembly, please verify that all components listed below are present in your package. Refer to the diagram for visual identification.

Detailed diagram showing the numbered components of the hydroponics system.
- LED 조명 패널
- 수조
- 수위 표시기
- 확장 가능한 Lamp 우편
- 물 펌프
- 물 유입구
- Planting Basket (6 units)
- 전원 코드 인터페이스
- Water Pump Cable Interface
설치 지침
- 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼냅니다.
- 조립 Lamp 우편: Insert the extendable lamp post (4) into the designated slot on the water tank (2). Ensure it is securely seated.
- 전원 연결: Connect the power cord to the power cord interface (8) on the unit.
- 워터펌프 연결: Connect the water pump cable to the water pump cable interface (9). Ensure the water pump (5) is correctly placed inside the water tank (2).
- 물 탱크 채우기: Open the water inlet (6) and fill the water tank (2) with clean water up to the "2.0L MAX" line indicated on the water level indicator (3).
- Prepare Planting Baskets: Place your chosen seeds into the planting baskets (7) with grow sponges. It is recommended to soak seeds overnight before planting for better germination, though some users report success without soaking.
- Insert Planting Baskets: Place the prepared planting baskets (7) into the openings on the water tank lid.
- 영양소 추가: Add appropriate hydroponic plant nutrients to the water tank according to the nutrient manufacturer's instructions. Some users find adding nutrients at setup beneficial, while others wait until seeds sprout. Follow the nutrient product's specific guidance.
작동 지침
1. Power On and Light Settings
After connecting the power, the system will be ready for operation. The GOLUMUP ZG1002 features a 15W LED light panel with 82 beads, optimized for plant growth.

The 15W LED light panel features 82 beads, providing an optimized red and blue light ratio for plant growth.
2. Intelligent Automatic Lighting Modes
The system offers three intelligent automatic lighting modes to support different plant growth stages. Select the appropriate mode using the control button.

Visual representation of the three automatic lighting modes: Germination, Growth, and Harvest.
- Mode 1 (Germination Stag이자형): 16 hours ON, 8 hours OFF. Ideal for successful germination and healthy seedling development.
- Mode 2 (Growth Stag이자형): 14 hours ON, 10 hours OFF. Suitable for vigorous plant growth.
- Mode 3 (Harvest Stag이자형): 12 hours ON, 12 hours OFF. Optimized for abundant yields.
3. 워터 펌프 작동
The integrated water pump operates silently to provide oxygen to plant roots. It runs on a cycle of 5 minutes ON and 25 minutes OFF.

Illustration of the water pump's silent operation and its timed cycle.
4. Water Level Monitoring
Monitor the water level using the intuitive water level indicator on the side of the tank. Ensure the water level remains above the minimum mark to prevent the pump from running dry.
유지
- 물 보충: Check the water level daily and refill as needed, typically once a week, to maintain optimal hydration for your plants. Always ensure the water level is above the minimum mark.
- 영양소 보충: Follow the instructions provided with your hydroponic nutrients for replenishment frequency. This usually involves adding nutrients with each water refill or every few weeks.
- 펌프 세척: If the pump's performance decreases or it stops working, disconnect the power and carefully remove the pump from the tank. Clean any debris or mineral buildup from the pump impeller and housing. Reassemble and test.
- 시스템 청소: Periodically, especially between growth cycles, empty the water tank and clean it thoroughly to prevent algae growth and mineral buildup.
- 라이트 패널 조정: Adjust the height of the LED light panel as your plants grow to maintain an optimal distance for light exposure. The extendable lamp post allows for easy height adjustment.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않습니다 |
|
|
| Poor seed germination |
|
|
| Slow plant growth |
|
|
Benefits of Hydroponic Growing
Hydroponic systems offer several advantages over traditional soil-based gardening, allowing for faster growth and year-round cultivation.

Visual comparison illustrating the benefits of hydroponic cultivation, such as faster growth and reduced maintenance, compared to traditional soil gardening.
- Faster Growth: Hydroponic crops typically grow 20% to 50% faster than soil-grown crops.
- Clean and Soil-Free: Eliminates soil, reducing mess and the risk of soil-borne pests.
- Reduced Water Usage: Efficient water circulation minimizes water waste.
- Pesticide-Free: Controlled indoor environment reduces the need for pesticides.
- 안정적인 환경: Provides a consistent growing environment, unaffected by external weather conditions.
Compatible Plants
The GOLUMUP ZG1002 system is suitable for growing a variety of herbs, leafy greens, and small fruiting plants. Examples에는 다음이 포함됩니다.

Examples of herbs and vegetables suitable for cultivation in the GOLUMUP ZG1002 Hydroponics Growing System.
- Herbs: Basil, Arugula, Spinach, Oregano, Stevia, Mizuna, Rosemary
- Small Fruiting Plants: Cherry Tomato, Strawberry, Chili
명세서
- 모델 번호: ZG1002
- 제품 크기: 11.5 x 10 x 6인치(29.2 x 25.4 x 15.2cm)
- 품목 무게: 2.86파운드(1.3kg)
- 제조업체: GOLUMUP
- ASIN: B0C7V1LCZB
- Pods Capacity: 6
- LED Grow Light: 15W, Full-Spectrum (82 beads)
- 물탱크 용량: 2.0리터(최대)
- Pump Cycle: 5분 켜짐, 25분 꺼짐
보증 및 지원
For warranty information, technical support, or any inquiries regarding your GOLUMUP ZG1002 Hydroponics Growing System Kit, please refer to the manufacturer's official website or contact GOLUMUP customer service directly. Contact details are typically provided in the product packaging or on the manufacturer's web대지.


