제품 끝view
The Lezyne Macro Drive 1400+ Headlight and Strip Drive Pro 400+ Taillight set provides comprehensive illumination for cycling, enhancing visibility and safety. The front light offers powerful output and long endurance, while the rear light ensures wide-angle visibility with a bright flash mode. Both lights feature durable construction and convenient USB-C charging.
Image: The Lezyne Macro Drive 1400+ Headlight (top) and Strip Drive Pro 400+ Taillight (bottom) shown together. The headlight is black with three clear lenses, and the taillight is black with a red translucent body.
주요 특징:
- Macro Drive 1400+ Headlight: Peak 1400 Lumens, 300-Hour Endurance in Eco Mode, Tri-Focus Optics for brighter and wider beam.
- Strip Drive Pro 400+ Taillight: Peak 400 Lumens, 80-Hour Runtime in Lowest Mode, Daytime Flash Mode, Wide-Angle Optics for 270° visibility.
- 충전 중: Water-Resistant USB-C Port with Charge Indicator, Rapid 2Amp 충전 중.
- 내구성: Durable Aluminum Body with Cooling Fins (Headlight), IPX7 Waterproof Rating.
- 배터리: 5200 mAh Battery Capacity (Headlight).
설정 및 설치
헤드라이트 설치:
- 장착 위치: Identify a suitable location on your bicycle's handlebar. Ensure the light beam will not be obstructed and can be aimed correctly.
- 스트랩 고정: Wrap the integrated rubber strap around the handlebar.
- Hook the Strap: Pull the strap firmly and hook it onto the plastic clip on the opposite side of the light mount. Ensure the light is securely fastened and does not wobble.
- 각도 조정: Adjust the angle of the headlight so that the beam is directed forward and slightly downward, illuminating the path ahead without blinding oncoming traffic.
Image: A close-up of the Lezyne Macro Drive 1400+ Headlight, showing its black aluminum body, three lenses, and integrated rubber strap for handlebar mounting.
Taillight Installation:
- 장착 위치: Choose a vertical section of your bicycle's seatpost. Ensure the taillight is visible from the rear.
- 스트랩 고정: Wrap the integrated rubber strap around the seatpost.
- Hook the Strap: Pull the strap firmly and hook it onto the plastic clip on the opposite side of the light mount. Verify the taillight is stable and facing directly backward.
Image: A close-up of the Lezyne Strip Drive Pro 400+ Taillight, highlighting its red translucent body and black mounting strap designed for seatpost attachment.
작동 지침
전원 켜기/끄기:
- To turn on, press and hold the power button located on the top of the light for approximately 2 seconds.
- To turn off, press and hold the power button for approximately 2 seconds.
모드 변경 :
- While the light is on, short press the power button to cycle through the available lighting modes (e.g., Overdrive, Enduro, Economy, Flash modes).
- Refer to the specific light's packaging or Lezyne's official website for a detailed list of modes and their respective lumen outputs and runtimes.
Image: The Lezyne Macro Drive 1400+ Headlight securely mounted on bicycle handlebars, demonstrating its compact profile 그리고 배치.
Image: Three Lezyne taillights illuminated, showcasing their wide-angle optics designed for 270-degree visibility, enhancing safety from multiple angles.
배터리 표시기:
The power button also functions as a battery indicator. Its color changes to indicate the current battery level:
- 녹색: Full to high charge.
- 노란색 : 중간 충전량.
- 빨간색: 배터리 잔량이 부족합니다. 빨리 충전하세요.
- 빨간색으로 깜박임: Critically low charge, recharge immediately.
Image: The Lezyne Macro Drive 1400+ Headlight illuminating a dark path from a bicycle's handlebars, demonstrating its powerful beam.
Image: The Lezyne Strip Drive Pro 400+ Taillight mounted on a bicycle's seatpost, emitting a bright red light for rear visibility in low-light conditions.
유지 관리 및 충전
조명 충전:
- Locate the USB-C charging port on the light. This port is typically covered by a rubber plug to ensure water resistance.
- Carefully open the rubber plug to expose the USB-C port.
- Connect a standard USB-C cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter).
- The charge indicator on the light will illuminate to show charging status. It will typically turn green or off when fully charged.
- Once charging is complete, disconnect the cable and firmly close the rubber plug to maintain water resistance.
이미지: 클로즈업 view of a Lezyne light's USB-C charging port, with water droplets on the surface, emphasizing its water-resistant design. The rubber cover is shown open.
청소 및 보관:
- 광고로 전등을 닦아라amp 먼지와 이물질을 제거하는 천. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- Ensure the USB-C port cover is securely closed when not charging to prevent water and dust ingress.
- Store the lights in a cool, dry place when not in use, especially during long periods of inactivity.
- For optimal battery life, charge the lights fully before long-term storage and recharge every few months.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 배터리가 소진되었습니다. | 제공된 USB-C 케이블을 사용하여 조명을 충전하세요. |
| Light turns on but quickly turns off. | 배터리 충전량이 적습니다. | 배터리를 완전히 충전하세요. |
| 조명 모드는 변경되지 않습니다. | 버튼을 제대로 누르지 않았거나 내부 문제입니다. | Ensure a firm, short press of the power button. If issue persists, contact customer support. |
| 조명이 충전되지 않습니다. | 케이블, 전원 또는 충전 포트에 결함이 있습니다. | 다른 USB-C 케이블과 전원을 사용해 보세요. 충전 포트가 깨끗하고 이물질이 없는지 확인하세요. |
| Water inside the light. | USB-C 포트 덮개가 제대로 밀봉되지 않았습니다. | Immediately turn off the light and allow it to dry completely. Ensure the USB-C port cover is always securely closed. Contact customer support if damage is suspected. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 1-LED-4P-V1737 |
| 상표 | 레진 |
| Headlight Brightness (Max) | 1400루멘 |
| Taillight Brightness (Max) | 400루멘 |
| 전조등 배터리 용량 | 5200mAh |
| 전원 | 배터리 구동 |
| 충전 포트 | USB-C |
| 재료 | Aluminum (Headlight) |
| 방수 등급 | IPX7 방수 |
| 장착 유형 | Handlebar Mount (Headlight), Seatpost Mount (Taillight) |
| 항목 패키지 치수 | 7.2 x 5.55 x 2.95 인치 |
| 패키지 무게 | 0.37 킬로그램 |
보증 및 지원
For warranty information and customer support, please refer to the official Lezyne web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
Lezyne Official Web대지: www.lezyne.com
추가적인 도움이 필요하시면 다음을 참조하실 수도 있습니다. 아마존에서 LEZYNE 스토어를 방문하세요.
