1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MICTUNING 60-Inch Foldable Triple LED Tailgate Light Bar. Please read this guide thoroughly before installation and use to ensure proper function and safety. This product is designed to enhance vehicle visibility and safety with multiple lighting functions.
2. 안전 정보
- 전기 작업을 수행하기 전에 항상 차량의 배터리를 분리하세요.
- 모든 배선 연결이 안전하고 적절하게 절연되어 단락을 방지하세요.
- Verify local regulations regarding auxiliary lighting before installation.
- Professional installation is recommended if you are unfamiliar with automotive electrical systems.
- 어떠한 방식으로든 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전이 위협받을 수 있습니다.
3. 제품 오버view
The MICTUNING 60-Inch Foldable Triple LED Tailgate Light Bar is an IP68 waterproof lighting solution designed for various vehicles. It features a durable aluminum frame for efficient heat dissipation and a triple-row LED design for enhanced brightness.
주요 특징:
- 다기능 조명: Provides full functions for brake (bright red), sequential turn signal (amber), running (low red), reverse (white), and emergency strobe (flash amber).
- 고휘도 : Equipped with 864 premium 2835SMD LED chips for superior visibility.
- 내구성 있는 구조: Features a heavy-duty aluminum frame for robust structure and effective heat dissipation.
- IP68 방수: Fully sealed silicone housing ensures reliable performance in various weather conditions.
- 접이식 디자인 : Allows for flexible installation without left or right division.
상자 안에 무엇이 들어있나요?
- Tri-row LED Tailgate Light Bar (2 pieces, 30 inches each)
- 4-Way Flat Connector Wire
- 장착 하드웨어
Figure 1: MICTUNING 60-Inch Triple LED Tailgate Light Bar and included 4-Way Flat Connector Wire.
4. 설정 및 설치
Follow these steps for proper installation of your tailgate light bar. Ensure your vehicle's surface is clean and dry before applying adhesive.
설치 단계:
- 표면 준비: Clean the mounting area on your tailgate thoroughly to remove any dirt, dust, or grease. Ensure the surface is completely dry.
- 접착 테이프를 떼어내세요: Carefully peel off the protective backing from the self-adhesive tape on the back of the light bar.
- 위치 및 스틱: Align the light bar to the desired position on your tailgate. Press firmly along the entire length of the light bar to ensure strong adhesion. The foldable design allows for flexible placement without specific left/right orientation.
- 배선 연결: Utilize the included 4-Way Flat Connector Wire. Connect the light bar's connector to your vehicle's existing 4-way flat trailer wiring harness. Pay close attention to the function of each wire (ground, running light, left turn/brake, right turn/brake, reverse, strobe) and connect them correctly.
- Secure Reverse Wire (if applicable): For full functionality, the reverse light wire (typically red) needs to be hardwired to your vehicle's reverse light circuit.
- 테스트 기능: After all connections are made, test all lighting functions (running, brake, turn signals, reverse, strobe) to ensure they operate correctly.
Figure 2: Visual guide for peeling adhesive, sticking the light bar, and connecting the 4-way flat connector.
배선 고려 사항:
- 4-PIN Connection: For vehicles 2014 and older, plug directly into the 4-pin plug and hardwire the reverse wire.
- Hardwire to Tail Light: For 2018-2021 Chevy Silverado/GMC Sierra, hardwiring to the tail light may be necessary. A tail light converter (B0D5LZDJV2) might assist.
- 7-PIN Plug-n-Play: For 2005-2014 F150, Silverado/Sierra, RAM, and 2007-2021 Tundra, a 7-pin adapter (B0DLBBJ739) can be used for plug-and-play installation.
- 비호환성: If lights do not function normally, use the included 4-Way Flat Connector Wire. If incompatibility persists, a tail light converter (B0C7G7ZHC4) may be required.
설치 비디오 :
Video 1: This video demonstrates the features of the Triple Tailgate Light Bar, including its aluminum frame, IP68 waterproof rating, and various lighting modes, providing a visual guide for understanding the product's capabilities and installation considerations.
5. 사용 설명서
The MICTUNING Triple LED Tailgate Light Bar offers five distinct lighting modes that synchronize with your vehicle's signals.
조명 모드:
- 가볍게 달리기: Emits a low red light when your vehicle's running lights are active.
- 브레이크 라이트: Illuminates a bright red light when the brake pedal is pressed.
- 순차식 방향지시등: Displays an amber light that illuminates sequentially from the center outwards in the direction of the turn.
- 역방향 조명: Activates a bright white light when the vehicle is in reverse.
- 스트로브 라이트: Flashes an amber light for emergency situations or hazard warning.
Figure 3: Illustration of the five distinct lighting modes: Sequential Turn Signal, Strobe, Brake, Running, and Reverse.
영상 촬영:
Video 2: This video showcases the MICTUNING 60-Inch Triple LED Tailgate Light Bar in action, demonstrating its various lighting functions including sequential turn signals, brake lights, running lights, and reverse lights on a vehicle.
6. 유지관리
The MICTUNING tailgate light bar is designed for durability and minimal maintenance. Regular cleaning will help maintain its appearance and performance.
- 청소: Use a soft cloth and mild soap with water to clean the light bar. Avoid abrasive cleaners or solvents that could damage the housing or LED lenses.
- 점검: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure the adhesive remains secure.
- 방수 등급: The IP68 rating ensures protection against dust and water immersion. However, avoid directing high-pressure water jets directly at the light bar for extended periods.
Figure 4: The light bar demonstrating its IP68 waterproof capability, submerged in water.
7. 문제 해결
If you encounter issues with your MICTUNING tailgate light bar, refer to the following common problems and solutions:
- 조명이 작동하지 않음:
- Check all wiring connections for proper contact and ensure they are not loose or corroded.
- Verify that the vehicle's trailer wiring harness is receiving power.
- Ensure the reverse wire is correctly hardwired to the vehicle's reverse light circuit.
- For some vehicles, especially newer models, a tail light converter (e.g., B0C7G7ZHC4) may be necessary to resolve electrical incompatibility issues.
- Incorrect Light Function (e.g., brake light acts as turn signal):
- Recheck the wiring connections to ensure each wire is connected to its corresponding function on the vehicle's harness.
- Ensure the 4-Way Flat Connector is fully seated and making good contact.
- 희미하거나 깜박이는 조명:
- 느슨한 연결이나 손상된 배선이 있는지 점검하세요.
- Check the vehicle's electrical system for sufficient voltag전자 공급.
- 접착제가 유지되지 않음:
- 설치하기 전에 장착 표면이 깨끗이 청소되고 건조한지 확인하세요.
- Apply additional automotive-grade adhesive or use the provided mounting hardware for a more secure attachment.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | MIC-06-094 |
| 치수(길이 x 너비 x 높이) | 60 x 1.5 x 1.7인치(152.4 x 3.81 x 4.32cm) |
| 품목 무게 | 1.54파운드(0.7kg) |
| 재료 | 알류미늄 |
| 방수 레벨 | IP68 방수 |
| LED 수량 | 864 pcs (2835SMD) |
| 조명 기능 | Brake, Sequential Turn Signal, Running, Reverse, Strobe |
| 커넥터 유형 | 4-Way Flat Connector |
| 자동차 적합 유형 | 유니버설 핏 |
| 평균 수명 | 2000시간 |
Figure 5: Detailed dimensions of the MICTUNING tailgate light bar.
9. 보증 및 지원
MICTUNING products are designed for quality and reliability. For specific warranty details, please refer to the warranty card included with your product or visit the official MICTUNING website. If you require technical assistance or have questions regarding your product, please contact MICTUNING customer support through their official channels.
추가 정보 및 지원을 받으려면 다음을 방문하세요. MICTUNING 스토어 (아마존).
