Anern 4200W 하이브리드 태양광 인버터 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation of your Anern 4200W Hybrid Solar Inverter. This device is designed to convert DC power from solar panels into AC power for household appliances, while also managing battery charging and grid interaction. Please read this manual thoroughly before installation and operation.

Figure 1.1: Anern 4200W Hybrid Solar Inverter with included WiFi module.

2. 안전 정보

중요한 안전 예방 조치:

• The starting power of inductive loads must be at least three times the rated power. Excessive inrush current can damage the inverter.
• Connect circuits correctly and install circuit breakers for each circuit.
• Power-on Sequence: First, turn on the battery, then start the inverter, and finally turn on the circuit breakers for photovoltaic (PV), grid, and load.
• Power-off Sequence: Turn off in the reverse order of power-on.

통합 보호 기능

The inverter is equipped with multiple protection mechanisms to ensure safe operation:

• 과전류 보호
• 언더볼tage 보호
• 단락 보호
• 과열 보호
• 과부하 보호
• 되메우기 보호
• 오버볼tage 보호
• 과충전 보호

그림 2.1: 이상view of the inverter's comprehensive protection features.

3. 제품 특징

• 고성능 출력: 4.2kW hybrid solar inverter (3600W rated power) with 24V DC to 220V/230V AC conversion.
• Advanced MPPT Solar Charger: Integrated 120A MPPT solar charge controller. Max PV Array Open Circuit Voltage: 500Vdc. PV Array MPPT Voltage Range: 90~450Vdc. Max PV Array Power: 6000W.
• 에너지 절약 모드 : Features a dual-circuit AC output function. The primary and secondary outputs are typically used under normal conditions. If there is no PV or grid input and battery voltage is too low, the primary circuit will shut down, and only the secondary output will remain active to conserve energy.
• 원격 모니터링: Supports WIFI/GPRS remote monitoring, allowing access to data and control of the inverter at any time. A WIFI module is included in the package.
• 다양한 충전 모드: Three optional charging modes: Solar Only, Solar and Utility, Solar Priority.
• 다중 출력 모드: Output modes include Solar Priority, Utility Priority, and SBU Mode. These modes meet various application requirements.
• Dual AC Outputs: The inverter features dual AC outputs. The combined power of the primary and secondary outputs should not exceed 3.6 kW.
• RGB LCD Display: High-resolution RGB LCD display, readable even in daylight, with RGB indicators for different operating modes.
• 배터리 호환성: Supports 24V lead-acid and lithium batteries, including GEL, AGM, FLD, LI, and SLD types. The inverter can operate without batteries. It can only be connected to PACE BMS, not BMS from other manufacturers. When using a lithium battery, select 'User-defined' battery type in program 05.

Figure 3.1: The Anern Hybrid Solar Inverter combines multiple functions into one unit.

Figure 3.2: Dual AC outputs and the high-resolution RGB LCD display.

Figure 3.3: The inverter supports a wide range of 24V battery types.

4. 사양

5. 설정 및 설치

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Refer to the wiring diagram below for connection details.

배선도view

Figure 5.1: Comprehensive wiring diagram for the inverter system.

연결 지침

• PV 입력:
  • 태양광 발전 용량: 4200W
  • 최대 PV 개방 회로 Voltag전자: 500VDC
  • MPPT 권tage 범위: 90VDC-450VDC
  • 스타트업 Voltage (initial charge): 120VDC
  • Recommended Cable: 10 AWG / 6mm²
  • It is recommended to connect solar modules in series.
• 배터리 연결:
  • Battery Type: 24V Lead-Acid / Lithium Battery
  • Recommended Cable and Terminal Size: 2 AWG / 25mm²
  • 권장 퓨즈: 150A
• AC 입력(전력망/발전기):
  • AC Input: 230VDC
  • 최대 AC 입력 볼륨tag전자: 300VAC
  • Max. AC Charging Current: 120A
  • Recommended Cable: 10 AWG / 6mm²
  • Recommended Breaker: 63A
• AC Output (Load):
  • AC 출력 전력: 4200W
  • AC 출력 볼륨tag전자: 220V / 230V
  • Recommended Cable: 10 AWG / 6mm²
  • Recommended Breaker: 63A
  • NOTE: The inverter's output is 230V. You can add a converter (not included) for 110V devices.

Ensure all connections are secure and follow local electrical codes. It is highly recommended to have installation performed by a qualified electrician.

6. 작동 모드

The Anern Hybrid Solar Inverter offers flexible operating modes to suit various energy management needs.

Charging Modes (3 Options)

그림 6.1: 이상view of charging and output modes.

• Solar Only (CSO): Solar energy is the primary source for charging the battery. The utility grid charges the battery only when solar energy is unavailable.
• Solar and Utility (SNU): Solar energy and the utility grid charge the battery simultaneously.
• Solar Priority (OSO): Solar energy is the sole charging source, regardless of its availability.

Output Modes (4 Options)

• USB - Utility First: Loads are primarily powered by the utility grid. Solar and battery power are only used if the utility company cannot supply power.
• SUB - Solar First (Standard): If solar energy is insufficient to power all connected loads, the grid supplies the loads simultaneously. The battery powers the loads only in two cases: if solar power is insufficient and grid power is unavailable, or if the grid is unavailable.
• SUB - Priority: If solar energy is insufficient to power all connected loads, the battery powers the loads simultaneously. The utility company then supplies the loads with power when the battery voltage drops below the warning value for low values or in program 12.
• MKS - Priority: Solar power has priority over loads. If solar power is insufficient, the loads are simultaneously supplied by the grid. The batteries serve as backup power.

RGB Operating Modes

The RGB display automatically changes color based on the inverter's operating status:

Figure 6.2: RGB display colors indicating different operating modes.

• 고정 모드: 백색광
• PV 모드: 바이올렛 라이트
• 배터리 모드: 빨간불
• 유틸리티 모드: 블루 라이트

원격 모니터링

The included WiFi module enables remote monitoring of your inverter. This allows you to retrieve desired data and operate the inverter from a distance using a compatible application.

Figure 6.3: WiFi monitoring allows control and data access via mobile devices.

7. 유지관리

To ensure the longevity and optimal performance of your Anern Hybrid Solar Inverter, regular maintenance is recommended.

• 정기 청소: 인버터 외부를 깨끗하게 유지하고 먼지와 이물질이 없도록 하십시오. 통풍구가 막히지 않도록 하십시오.
• 연결 확인: Periodically inspect all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
• 환경 조건: 인버터는 직사광선, 습기 및 극한 온도 변화를 피해 통풍이 잘 되는 곳에 설치해야 합니다.
• 펌웨어 업데이트: 제조사 확인해보세요 web인버터에 최신 기능과 버그 수정 사항이 적용되도록 하려면 웹사이트나 앱을 통해 펌웨어 업데이트가 있는지 확인하십시오.

8. 문제 해결

인버터에 문제가 발생하면 다음과 같은 일반적인 문제 해결 단계를 고려하십시오.

• 전원/디스플레이 꺼짐: Check all power connections, including battery, PV, and AC input. Ensure circuit breakers are in the ON position. Verify battery voltage는 작동 범위 내에 있습니다.
• 출력 전력 없음: Check the load connections and ensure the inverter is not in an error state (indicated by the display or fault indicator). Verify that the output mode is correctly configured.
• 낮은 출력 전력: Ensure PV input is sufficient and batteries are adequately charged. Check for any overload conditions.
• 과부하 경고: Reduce the connected load. Ensure the starting power of inductive loads does not exceed the inverter's capacity.
• 과열: Ensure proper ventilation around the inverter. Clear any obstructions from cooling fans.
• WiFi 연결 문제: Ensure the WiFi module is correctly installed and within range of your network. Refer to the WiFi module's specific instructions for setup.

For persistent issues, refer to the detailed troubleshooting section in the complete user manual (if available in PDF format) or contact customer support.

9. 보증 및 지원

Anern provides a 1-year warranty for this inverter. For any issues during use, please contact Anern customer support. You may be required to provide a video demonstrating the fault to assist technicians in diagnosing the cause.

For further assistance, please visit the official Anern store on Amazon or contact their customer service directly. Ensure you have your product model and purchase details ready when contacting support.

Visit the Anern Store on Amazon