소개
This manual provides detailed instructions for the safe and efficient operation of your Walimex Pro Stager 600 HSS Studio Flash Set Single. Please read this manual thoroughly before using the product and keep it for future reference. Proper understanding of these instructions will ensure optimal performance and longevity of your equipment.
안전 지침
부상이나 제품 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 기기가 제대로 접지되었는지 항상 확인하십시오.
- Do not expose the flash unit to moisture, rain, or extreme temperatures.
- 플래시 빛에 눈이 직접 노출되지 않도록 하세요. 일시적으로 시력이 손상될 수 있습니다.
- Disconnect the unit from the power supply before cleaning or performing any maintenance.
- 제품을 직접 열거나 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 맡기십시오.
- 장치를 가연성 물질로부터 멀리 두십시오.
패키지 내용
The Walimex Pro Stager 600 HSS Studio Flash Set Single includes the following components:
- 1x Walimex Pro Stager 600 HSS Studio Flash Unit with LED Modeling Light
- 1x Standard Reflector
- 1x Power Cable (4 m)
- 1x Sync Cable (4 m)
- 1x Flash Tube
- 보호 캡 1개
- 1x AIR 290 Deluxe Lamp Stand (260 cm)
- 1x Orange Line PLUS Softbox (60x90 cm)
- 1x Softbox Adapter
- 1x Radio Trigger
- 1x Studio Bag XL (75 cm)
제품 특징
The Walimex Pro Stager 600 HSS Studio Flash offers a range of advanced features for professional photography:
- Powerful Flash Output: 600 W with continuous regulation from 1/1 (full power) to 1/128 for precise light control.
- 고속 동기화(HSS): Enables synchronization at shutter speeds up to 1/8000 seconds, allowing you to freeze fast motion and use wide apertures in bright conditions.
- Integrated 2.4 GHz Receiver: Features 16 channels and 5 groups for reliable wireless control with a compatible radio trigger.
- LED Modeling Light: A modern 25 W LED modeling light assists in previewing lighting effects and focusing.
- Bowens/Walimex Pro Bayonet Connector: Ensures broad compatibility with a wide range of light shapers and accessories.
- 빠른 재활용 시간: A quick recycling time of less than 0.6 seconds at full power minimizes waiting between shots.
- 내구성 있는 구조: Built with a high-quality aluminum finish for robustness and longevity.
- 사용자 친화적인 제어판: An intuitive control panel simplifies operation and setting adjustments.
- 창의적인 가능성: Supports 1st and 2nd curtain synchronization for various motion effects in your images.
설정
Follow these steps to set up your Walimex Pro Stager 600 HSS Studio Flash:
- L을 조립amp 서다: Extend the AIR 290 Deluxe Lamp Stand to the desired height and secure all sections firmly. Ensure the stand is stable on a flat, level surface to prevent tipping.
- Mount the Flash Unit: Carefully attach the Walimex Pro Stager 600 HSS flash unit to the top of the lamp stand. Secure it firmly using the mounting knob on the stand.
- Attach the Reflector or Softbox:
- For the standard reflector: Align the reflector with the Bowens/Walimex Pro bayonet mount on the flash unit and twist clockwise until it locks into place.
- For the softbox: Assemble the 60x90 cm softbox with the provided softbox adapter according to its separate instructions. Attach the assembled softbox to the flash unit's bayonet mount.
- 전원 연결: Plug the power cable into the flash unit's power input port, then connect the other end to a suitable electrical outlet.
- Connect Sync Cable (Optional): If you are not using a wireless trigger, connect the sync cable from your camera's sync port to the flash unit's sync port.
- Install Radio Trigger: Mount the included radio trigger onto your camera's hot shoe. Ensure it is powered on and paired with the flash unit. Refer to the trigger's specific manual for detailed pairing instructions.
작동 지침
Once set up, operate your studio flash as follows:
- 전원 켜기: Switch the main power button on the flash unit to the "ON" position. The LED modeling light will illuminate, and the unit will begin to charge.
- Adjust Flash Output: Use the control dial or buttons on the unit's control panel to adjust the flash output. The power can be continuously regulated from 1/1 (full power) down to 1/128. The current setting will be displayed on the LCD screen.
- 조명 제어 모델링: The 25W LED modeling light can be adjusted in brightness or turned off completely via dedicated controls on the panel.
- HSS Mode Activation: To activate High Speed Sync (HSS) mode, ensure both the flash unit and your radio trigger are set to HSS mode. This allows for flash synchronization at shutter speeds faster than your camera's native sync speed, up to 1/8000s. Refer to your camera's and radio trigger's manuals for specific HSS activation procedures.
- 무선 제어: If using the radio trigger, ensure it is set to the same channel and group as the flash unit. The unit supports 16 channels and 5 groups for flexible multi-flash setups.
- 테스트 플래시: Press the "TEST" button on the flash unit or the radio trigger to fire a test flash. This helps verify your settings and light placement before shooting.
- 재활용 시간: After a flash, the unit will recycle, indicated by a ready light or sound. The fast recycling time of less than 0.6 seconds ensures you are ready for the next shot quickly.
- 전원 끄기 : After use, switch the main power button to "OFF" and disconnect the power cable from the wall outlet.
유지
Regular maintenance ensures the longevity and optimal performance of your flash unit:
- 청소: Use a soft, dry, lint-free cloth to clean the exterior of the flash unit. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
- 플래시 튜브 교체: The flash tube is a consumable part with a limited lifespan. If it needs replacement, ensure the unit is unplugged and completely cooled down before attempting. It is recommended to consult a qualified technician or the manufacturer for flash tube replacement.
- 저장: When not in use, store the flash unit and its accessories in a dry, dust-free environment, preferably in the included studio bag, to protect it from environmental elements and physical damage.
- 케이블 검사: Periodically inspect all power and sync cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards.
문제 해결
If you encounter issues with your Walimex Pro Stager 600 HSS Studio Flash, refer to the following troubleshooting guide:
- 플래시가 터지지 않음:
- Ensure the unit is powered on and properly connected to a working power source.
- Check if the flash tube is correctly installed and not visibly damaged.
- Verify the sync cable connection (if used) or confirm that the wireless trigger is correctly paired and functioning.
- Ensure the camera's hot shoe connection is clean and the trigger is securely mounted.
- Check the battery levels of the radio trigger (if applicable).
- 일관되지 않은 플래시 출력:
- Confirm that the power settings on both the flash unit and the trigger are consistent.
- Ensure the unit has fully recycled before firing again, especially after full-power flashes.
- The flash tube may be nearing the end of its operational lifespan and require replacement.
- HSS mode not working:
- Verify that both the flash unit and the radio trigger are explicitly set to HSS mode.
- Ensure your specific camera model and the radio trigger being used are fully compatible with HSS functionality.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | Walimex Pro |
| 모델 | 23387 |
| 플래시 출력 | 600와트 |
| 전력 조절 | 1/1 to 1/128 (continuous) |
| 고속 동기화(HSS) | 최대 1/8000초 |
| 가이드 번호 | 77 |
| 재활용 시간 | 0.6초 이내 |
| 모델링 라이트 | 25W LED |
| 무선 수신기 | Integrated 2.4 GHz (16 channels, 5 groups) |
| 장착 유형 | Bowens/Walimex Pro Bayonet |
| 연결 기술 | 무선(무선 주파수) |
| 제품 크기(L x W x H) | 118 x 49 x 44cm |
| 품목 무게 | 9.25kg |
| 원산지 | 중국 |
| 방수 수준 | 방수가 아닙니다 |
보증 및 지원
For detailed warranty information, terms, and conditions, please refer to the official Walimex Pro website or contact your authorized retailer. Keep your proof of purchase, such as a receipt or invoice, as it will be required for any warranty claims or service requests. For technical support or further assistance, please reach out to the manufacturer's customer service department.
