Zinus EU-FBOBH2-41H

Zinus Soren Bed Frame 180 x 200 cm - Black - Instruction Manual

Model: EU-FBOBH2-41H

소개

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Zinus Soren Bed Frame. Please read all instructions carefully before assembly and use to ensure safe and proper functioning of the product.

안전 경고

경고:

  • Do not exceed a total weight of 318 kg (700 lbs) on the bed frame.
  • Assemble carefully according to the instructions to prevent instability or collapse.
  • 조립하는 동안 모든 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하십시오.
  • 사용하기 전에 모든 볼트가 단단히 조여져 있는지 확인하세요.
  • Periodically check and re-tighten all bolts to maintain stability.

패키지 내용

조립을 시작하기 전에 모든 부품이 있는지 확인하십시오. 패키지에는 다음이 포함되어야 합니다.

  • 머리판
  • 발판
  • 사이드 레일
  • 슬랫
  • 지지 다리
  • Assembly Hardware (bolts, Allen key, ratchet wrench)
  • 설치 설명서

If any parts are missing or damaged, please contact Zinus customer support.

설정 및 조립

The Zinus Soren Bed Frame is designed for straightforward assembly. It is recommended to have two people for easier installation.

  1. 구성 요소 풀기: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 흠집이 생기지 않도록 깨끗하고 부드러운 표면에 구성품들을 펼쳐 놓으십시오.
  2. 부품 식별: Match each component to the corresponding number in the provided installation manual.
  3. 헤드보드에 측면 레일 부착: Securely attach the side rails to the headboard using the provided bolts and tools. Ensure a snug fit.
  4. 발판을 부착하세요: 발판을 측면 레일의 다른 쪽 끝에 연결하십시오.
  5. 지지대 설치: 설명서에 나와 있는 대로 중앙 지지대를 프레임에 부착하십시오.
  6. 슬랫을 놓으세요: Lay the metal slats across the frame. Ensure they are evenly spaced and secured according to the instructions. The platform is designed to support any mattress directly.
  7. 최종 조임: 안정성을 위해 모든 볼트와 연결부가 완전히 조여졌는지 다시 한번 확인하십시오.
Zinus Soren Bed Frame components laid out for assembly

Image: All components of the Zinus Soren Bed Frame laid out, ready for assembly. This includes the headboard, footboard, side rails, and metal slats.

Diagram of Zinus Soren Bed Frame dimensions

Image: A diagram illustrating the dimensions of the Zinus Soren Bed Frame, including length (206cm), width (181cm), headboard height (104cm), and footboard height (43cm).

사용 및 작동

Once assembled, the Zinus Soren Bed Frame is ready for use. Place your mattress directly onto the metal slat platform. No box spring is required.

  • 매트리스 호환성: The platform is designed to support any type of mattress.
  • 침대 밑 보관: The 26 cm (10.2 inches) clearance under the mattress platform provides amp저장을 위한 공간.
Zinus Soren Bed Frame with mattress and bedding

Image: The Zinus Soren Bed Frame fully assembled with a mattress and bedding, showcasing its modern design and under-bed clearance.

유지

To ensure the longevity and appearance of your Zinus Soren Bed Frame, follow these simple maintenance guidelines:

  • 청소: Wipe the frame with a dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
  • 볼트 체크: Periodically (e.g., every 3-6 months) check all assembly bolts and re-tighten them if necessary. This helps maintain the frame's stability and prevents squeaking.
  • 과부하를 피하세요: Do not place excessive weight on the frame beyond the specified limit of 318 kg.

문제 해결

문제가능한 원인해결책
침대 프레임이 흔들리거나 불안정합니다.볼트가 헐거워졌거나 조립이 잘못되었습니다.모든 볼트가 단단히 조여졌는지 확인하십시오.view assembly instructions to confirm correct installation of all parts, especially support legs.
삐걱거리는 소리.금속 부품 간의 연결 불량 또는 마찰.Tighten all bolts. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to connection points, avoiding contact with wood accents.
조립 중 부품이 누락되었습니다.포장 오류.Contact Zinus customer support immediately with your product model number and a description of the missing parts.

명세서

특징세부 사항
모델 번호EU-FBOBH2-41H
치수(길이 x 너비 x 높이)206cm x 181cm x 104cm (81.1" x 71.3" x 40.9")
매트리스 크기 호환성180 x 200 cm (Super King)
침대 아래 여유 공간26cm(10.2인치)
중량 용량318kg(700파운드)
재료Engineered Wood and Steel
색상검은색
조립이 필요합니다
패키지 내용헤드보드, 설치 설명서, 슬랫

보증 정보

The Zinus Soren Bed Frame comes with a 5년 한정 보증본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

For full warranty terms and conditions, please refer to the official Zinus web사이트를 방문하거나 고객 지원팀에 문의하세요.

고객 지원

궁금한 사항이 있거나 조립에 도움이 필요하거나 누락/손상된 부품을 신고해야 하는 경우 Zinus 고객 지원팀에 문의하십시오.

  • Web대지: Zinus 공식 웹사이트를 방문하세요. webFAQ 및 지원 리소스를 위한 사이트입니다.
  • 문의 양식: Use the contact form available on the Zinus web대지.
  • 핸드폰: Refer to the Zinus web지역 연락처 사이트.

Please have your model number (EU-FBOBH2-41H) and proof of purchase ready when contacting support.

관련 문서 - EU-FBOBH2-41H

사전view 지누스 침대 프레임 조립 설명서: FBOBH2-39-1 모델 가이드
Comprehensive assembly guide for the Zinus FBOBH2-39-1 bed frame, detailing all components and providing step-by-step instructions for a secure and easy setup. Features adult assembly recommendation and customer support contact information.
사전view ZINUS Ironline 금속 및 목재 플랫폼 침대(헤드보드 포함) 조립 가이드
ZINUS Ironline 금속 및 목재 플랫폼 침대(헤드보드 포함)의 단계별 조립 설명서와 보증 정보입니다. 풀, 퀸, 킹 사이즈의 구성품 목록과 제품 정보가 포함되어 있습니다.
사전view 지누스 카이 침대 프레임 조립 설명서
지누스 카이 대나무 및 금속 플랫폼 침대 프레임(헤드보드 포함)의 단계별 조립 설명서입니다. 구성품 목록 및 반품 정책이 포함되어 있습니다.
사전view Zinus FBOBH2-35-2 침대 프레임 조립 설명서
Zinus FBOBH2-35-2 플랫폼 침대 프레임의 단계별 조립 가이드입니다. 부품 목록, 반품 정책 및 자세한 조립 지침이 포함되어 있습니다.
사전view Zinus FBOBH2-39-2 침대 프레임 조립 설명서
Step-by-step assembly instructions for the Zinus Suzanne Metal & Wood Bed Frame, model FBOBH2-39-2. Includes a list of components and assembly diagrams.
사전view Zinus Ironline 금속 및 목재 플랫폼 침대 프레임(풋보드 포함) 조립 및 보증 안내서
지너스 아이언라인 금속 및 원목 플랫폼 침대 프레임(풋보드 포함)에 대한 자세한 조립 설명서, 부품 목록, 반품 정책 및 5년 제한 보증서가 제공됩니다. 풀, 퀸, 킹 사이즈로 제공됩니다.