Technaxx 인버터 TE23 3000W 사용 설명서

1. 중요 안전 지침

Please read and understand all safety instructions before operating the Technaxx Inverter TE23. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 인버터 주변의 통풍이 원활하도록 하세요. 냉각 통풍구를 막지 마세요.
• 인버터를 물, 비 또는 과도한 습기에 노출시키지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 인버터는 12V DC 전원에만 연결하세요.
• Do not connect the inverter to AC power sources.
• 모든 연결 부분이 안전하고 적절하게 절연되어 단락을 방지하세요.
• Do not disassemble or modify the inverter. Refer all servicing to qualified personnel.
• Avoid operating the inverter in environments with flammable fumes or gases.
• 유지보수 또는 청소를 하기 전에 인버터의 전원을 차단하십시오.

2. 제품 오버view

The Technaxx Inverter TE23 is a pure sine wave power inverter designed to convert 12V DC battery power into standard 230V AC mains voltage. It provides a continuous output of 3000W and a peak output of 6000W, suitable for a wide range of electronic devices.

그림 2.1: 전면 view of the Technaxx Inverter TE23, showing the two Schuko sockets, USB-A and USB-C ports, LCD display, and power button.

그림 2.2: 상세 view of the inverter's LCD display, showing DC input voltage, AC 출력 voltage, frequency, and load indicators.

그림 2.3: 후면 view of the inverter, highlighting the integrated cooling fans and the robust battery connection terminals.

Figure 2.4: Diagram illustrating the main components of the inverter, including power input terminals, cooling fan, power button, LCD screen, 230V AC outlets, and USB ports.

주요 특징:

• 순수 사인파 출력: Ensures stable and clean power, safe for sensitive electronics.
• 고성능 출력: 연속 출력 3000W, 최대 출력 6000W.
• 다중 출력: Two 230V Schuko sockets, one USB-A Quick Charge 3.0 port, and one USB-C port.
• 고급 보호: Automatic shut-off for low battery (~10.2V), over-voltage, 언더볼륨tage, 과부하 보호.
• 통합 냉각 팬: 작동 중 과열을 방지합니다.
• TÜV 라인란트 인증: 제품의 안전과 품질을 보장합니다.
• LCD 디스플레이: Provides real-time information on input voltage, 출력 볼륨tage, frequency, and load.

3. 패키지 내용

설치를 진행하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x Technaxx Inverter TE23 (3000W)
• 2 x Connection Cables (0.6m each)
• 1 x 사용자 매뉴얼(이 문서)

Figure 3.1: The Technaxx Inverter TE23 shown with its included battery connection cables.

4. 설정 및 설치

Follow these steps carefully to set up your Technaxx Inverter TE23.

1. 적합한 위치 선택: Select a dry, well-ventilated area for the inverter. Ensure it is away from direct sunlight, heat sources, and flammable materials. The inverter can be installed in cars, caravans, or boats.
2. 배터리 준비: Ensure the 12V DC battery is fully charged and in good condition. Turn off any loads connected to the battery.
3. 케이블 연결:
   • 연결하다 빨간색 positive (+) cable to the positive (+) terminal of the inverter.
   • 연결하다 검은색 negative (-) cable to the negative (-) terminal of the inverter.
   • 연결이 단단하고 안전한지 확인하세요.
   

   Figure 4.1: Proper connection of the battery cable to the inverter terminal, showing the protective cover.

4. 배터리에 연결:
   • 다른쪽 끝을 연결하세요 빨간색 positive (+) cable to the positive (+) terminal of the 12V battery.
   • 다른쪽 끝을 연결하세요 검은색 negative (-) cable to the negative (-) terminal of the 12V battery.
   • Double-check all connections for polarity and tightness. Loose connections can cause overheating and damage.
5. 초기 전원 켜기: Once all connections are secure, press the power button on the inverter. The LCD display should illuminate, indicating the inverter is operational.

5. 사용 설명서

This section details how to use your Technaxx Inverter TE23.

5.1 전원 켜기/끄기

• To turn on the inverter, press and hold the power button (ⓄLCD 화면이 켜질 때까지 몇 초간 기다리세요.
• To turn off the inverter, press and hold the power button (Ⓞ) again until the LCD screen turns off.

5.2 장치 연결

The inverter provides 230V AC power through its Schuko sockets and 5V DC power through its USB ports.

1. Ensure the inverter is powered on.
2. For AC devices, plug the device's power cord into one of the 230V Schuko sockets. Ensure the device's power consumption does not exceed the inverter's continuous rating (3000W).
3. For USB devices, connect your USB-A or USB-C charging cable to the respective port on the inverter. The USB-A port supports Quick Charge 3.0.
4. Monitor the LCD display for real-time information on input voltage, 출력 볼륨tage, frequency, and load.

Figure 5.1: The inverter in use, demonstrating connections to various household appliances.

5.3 LCD 디스플레이 이해

The LCD display provides critical operational information:

• DC 볼륨tage: Shows the current input voltage from the 12V battery.
• AC 볼륨tage: Displays the output AC voltage (typically 220V or 230V).
• 빈도: Indicates the output AC frequency (typically 50Hz).
• 부하 표시기: Shows the approximate load percentage on the inverter.
• Power/Normal/Fault Indicators: LEDs indicating operational status or error conditions.

그림 5.2: 명확한 view of the LCD display providing real-time operational data.

6. 보호 기능

The Technaxx Inverter TE23 incorporates several safety features to protect itself and your connected devices:

• 낮은 볼륨tage Shut-off: The inverter will automatically shut down and sound an alarm if the input DC voltage drops to approximately 10.2V to protect the battery from deep discharge.
• 오버볼tage 보호: 입력 볼륨이 낮으면 전원이 꺼집니다.tage는 안전 한계를 초과합니다.
• 과부하 보호: Shuts down if the connected load exceeds the inverter's maximum continuous or peak power rating.
• 과열 보호 : The integrated cooling fan activates to dissipate heat. If the temperature continues to rise to unsafe levels, the inverter will shut down.
• 단락 보호: Protects against damage from short circuits on the output.

7. 유지관리

정기적인 유지관리를 통해 인버터의 최적의 성능과 수명을 보장할 수 있습니다.

• 청소: Periodically clean the exterior of the inverter with a soft, dry cloth. Ensure the cooling vents are free from dust and debris. Do not use liquid cleaners.
• 사이: 모든 전기 연결부(배터리 단자, 출력 소켓)가 단단히 고정되어 있고 부식이 없는지 정기적으로 점검하십시오.
• 통풍: Ensure the area around the inverter remains clear to allow for proper airflow and cooling.
• 저장: 인버터를 장기간 보관할 경우 배터리에서 분리하여 서늘하고 건조한 곳에 보관하세요.

Figure 7.1: Ensure the cooling fan and vents are kept clear for efficient heat dissipation.

8. 문제 해결

If you encounter issues with your Technaxx Inverter TE23, refer to the following table:

9. 사양

10. 보증 및 지원

Technaxx products are designed for reliability and performance. For warranty information and technical support, please refer to the official Technaxx web사이트를 방문하거나 고객 서비스에 직접 문의하세요.

• 제조업체: 테크낙스
• Web대지: www.technaxx.de (일반적인 website, specific support link not provided in input)
• 연락하다: 제조업체의 내용을 참조하세요 website for contact details and support channels.

보증 청구를 위해 구매 증명서를 보관하십시오.