Fein GAL 1880 CV

Fein GAL 1880 CV 급속 충전기 사용 설명서

Model: GAL 1880 CV

1. 제품 오버view

The Fein GAL 1880 CV Rapid Charger is designed for efficient and safe charging of all Ampshare and Bosch Professional 18V lithium-ion battery packs. This charger features an 8-amp charging current, active air cooling, and process-controlled charging to optimize battery life and minimize downtime. Its compact design includes an integrated cord wrap for organized storage.

Fein GAL 1880 CV Rapid Charger

Image 1.1: The Fein GAL 1880 CV Rapid Charger, a black and orange unit with a battery slot and indicator lights.

2. 중요 안전 지침

Read all safety warnings and instructions before using the charger. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

2.1 일반 안전

  • Keep the charger dry: Do not expose the charger to rain or wet conditions. Water entering a charger will increase the risk of electric shock.
  • 환기가 잘 되는 곳에서 사용하십시오. Ensure adequate ventilation during charging. Do not cover the charger's ventilation slots.
  • Avoid charging damaged batteries: Do not attempt to charge batteries that are visibly damaged or defective.
  • 지정된 배터리만 사용하십시오. This charger is designed exclusively for Ampshare and Bosch Professional 18V lithium-ion battery packs. Charging other types of batteries may cause personal injury and damage.
  • Inspect charger and cord: Before each use, check the charger, cable, and plug for damage. Do not use the charger if damage is detected.
  • 사용하지 않을 때는 플러그를 뽑아두세요: 사용하지 않을 때나 청소하기 전에는 충전기를 전원에서 분리하세요.

2.2 전기 안전

  • 전원 공급 장치: 전원 공급 장치 볼륨을 확인하십시오.tage matches the rating specified on the charger's label.
  • 접지: The charger is double-insulated and does not require grounding.
  • 연장 코드: If an extension cord is necessary, ensure it is properly rated for the charger's power requirements and in good condition.

3. 패키지 내용

포장을 풀 때 모든 품목이 있는지 확인하세요.

  • Fein GAL 1880 CV Rapid Charger
  • 사용 설명서

4. 설정 지침

4.1 충전기 연결하기

  1. 충전기를 직사광선이나 열원을 피해 통풍이 잘 되는 안정적이고 평평한 곳에 놓으십시오.
  2. Unwrap the power cord from the integrated cord wrap.
  3. Plug the charger's power cord into a standard electrical outlet (240 Volts input).
Fein GAL 1880 CV Rapid Charger with cord wrap

Image 4.1: The Fein GAL 1880 CV Rapid Charger showcasing its integrated cord wrap for tidy storage.

4.2 배터리 삽입

  1. Ensure the battery pack is clean and free of debris.
  2. 슬라이드 Ampshare or Bosch Professional 18V battery pack into the charging slot on the charger until it clicks into place.
  3. The charging indicator light will illuminate, indicating the charging process has begun.

5. 사용 설명서

5.1 충전 프로세스

Once a compatible battery is inserted and the charger is connected to power, the charging process starts automatically. The charger utilizes an 8-amp current and process-controlled technology for rapid and optimized charging.

Fein GAL 1880 CV Rapid Charger with 'Fast Charging' text

Image 5.1: The Fein GAL 1880 CV Rapid Charger highlighting its fast charging capability for minimal downtime.

5.2개의 표시등

The charger features indicator lights to communicate the battery's charging status:

  • 솔리드 그린: 배터리가 완전히 충전되었습니다.
  • 녹색 깜박임: 배터리를 충전 중입니다.
  • 단색 빨간색: Battery or charger error (e.g., battery too hot/cold, defective battery).
  • 빛 없음: Charger not connected to power, or battery not properly inserted.

5.3 Active Air Cooling

The GAL 1880 CV charger incorporates active air cooling to prevent battery overheating during the charging cycle. This feature helps extend the overall lifespan of your battery packs and ensures consistent performance.

Fein GAL 1880 CV Rapid Charger with 'Active Air Cooling' text

Image 5.2: The Fein GAL 1880 CV Rapid Charger emphasizing its active air cooling and process-controlled charging features.

5.4 충전 시간

A full charge for a typical battery pack can take approximately 113 minutes, depending on the battery's capacity and current charge level.

6. 유지관리

6.1 청소

  • 청소하기 전에는 항상 충전기를 뽑으세요.
  • 부드럽고 마른 천으로 충전기 외부를 닦아주세요.
  • 연마성 세척제나 용제를 사용하지 마십시오.
  • Keep the ventilation slots clear of dust and debris to ensure proper air circulation.

6.2 보관

  • 충전기는 직사광선과 습기를 피해 건조하고 서늘한 곳에 보관하십시오.
  • Utilize the integrated cord wrap to keep the power cord neatly stored.

7. 문제 해결

문제가능한 원인해결책
충전기 표시등이 켜지지 않습니다.No power supply; battery not inserted correctly; charger malfunction.Check power connection; re-insert battery; try a different outlet; contact support if issue persists.
배터리가 충전되지 않습니다(녹색 깜빡임 표시등이 작동하지 않음).Battery too hot/cold; battery defective.Allow battery to reach room temperature; try a different battery; contact support if issue persists.
Red indicator light is solid.Battery error; charger error.Remove and re-insert battery; try a different battery; if red light persists with multiple batteries, charger may be faulty.

8. 기술 사양

특징사양
모델갈 1880 이력서
상표페인
입력 Voltage240 볼트
출력 볼륨tage18볼트(DC)
현재 평가8 Amps
충전 시간Approx. 113 minutes (for full charge)
호환성Ampshare & Bosch Professional 18V Batteries
ASINB0C5GTTTDS

9. 보증 및 지원

Fein products are manufactured to high-quality standards. For information regarding warranty coverage, service, or technical support, please refer to the official Fein web사이트 또는 고객 서비스 부서에 문의하십시오.

You can visit the official Fein store for more information: 아마존에서 Fein 스토어를 만나보세요

관련 문서 - 갈 1880 이력서

사전view FEIN CCG18 Akülü Avcılama Makinesi Kullanım Kılavuzu
FEIN CCG18 시리즈는 최고의 avcılama makineleri için kapsamlı kullanım kılavuzu를 제공합니다. Güvenlik talimatları, teknik özellikler 및 çalıştırma bilgileri içerir.
사전view FEIN ASCD18 시리즈 Akku-Schlagschrauber Bedienungsanleitung
FEIN ASCD18 Serie Akku-Schlagschrauber(ASCD18-200W4 AS, ASCD18-300W2 AS, ASCD18-1000W34 AS)에 대한 Umfassende Bedienungsanleitung mit technischen Daten, Sicherheitshinweisen und Bedienungsanleitungen.
사전view FEIN ASCM18-4 QM AS / QMP AS Akku-Schlagbohrschrauber Bedienungsanleitung
Diese Bedienungsanleitung für die FEIN ASCM18-4 QM AS und ASCM18-4 QMP AS Akku-Schlagbohrschrauber enthält wichtige Informationen zur sicheren Bedienung, technischen Spezifikationen und Wartung. Sie sind Teil des AMP공유 시스템.
사전view FEIN AKFH18-5T AS (**) Instruction Manual
Official instruction manual for the FEIN AKFH18-5T AS (**) cordless bevel milling machine. This guide details essential safety precautions, operational procedures, battery handling, maintenance, technical specifications, and intended use for professional applications. Essential reading for safe and effective operation.
사전view FEIN ABLK18 무선 니블러 사용 설명서
이 종합 설명서는 FEIN ABLK18-1.3CSE AS 및 ABLK18-1.6E AS 충전 니블러 모델의 작동, 유지보수 및 안전 지침을 자세히 설명합니다. 효율적인 판금 절단을 위해 설계된 이 공구는 AMP전문적인 용도에 필요한 유연성과 강력한 성능을 제공하는 공유 배터리 시스템입니다.
사전view FEIN ASCM18-4 QM AS / QMP AS 무선 드릴/드라이버 사용 설명서
FEIN ASCM18-4 QM AS 및 ASCM18-4 QMP AS 무선 드릴/드라이버에 대한 종합 사용 설명서로, 전문가용으로 작동, 안전, 기술 사양 및 유지 관리에 대한 자세한 내용을 담고 있습니다.