BLUETTI AC180 태양광 발전기 사용 설명서

소개

The BLUETTI AC180 Solar Generator is a versatile portable power station designed to provide reliable power for various applications, including outdoor activities, camping, and emergency backup during power outages. This manual provides essential information for the safe and efficient operation of your AC180 unit and its accompanying 100W solar panel.

Figure 1: BLUETTI AC180 Portable Power Station with 100W Solar Panel.

상자 안에 무엇이 들어있나요?

Upon unboxing your BLUETTI AC180 Solar Generator kit, please verify that all the following components are included:

• BLUETTI AC180 휴대용 발전소
• 100W Solar Panel (shipped separately)
• AC 충전 케이블
• 태양광 충전 케이블
• 자동차 충전 케이블
• 사용자 설명서

설정

Before first use, ensure your AC180 unit is fully charged. Refer to the 'Charging Options' section for detailed instructions.

초기 전원 켜기

• 메인 전원 버튼을 화면이 켜질 때까지 몇 초간 길게 누르세요.
• The display will show the current battery level, input/output wattage, 그리고 예상 남은 런타임.

Figure 2: Intuitive display for real-time monitoring of input, output, and battery status.

작동 지침

장치 연결

The AC180 offers multiple output ports to power various devices:

• AC 콘센트: Press the 'AC' button on the control panel to activate the 4 AC outlets. These provide 1800W continuous output (2700W surge).
• USB 포트: The unit features USB-C and USB-A ports. Press the 'DC' button to activate these outputs for charging phones, tablets, and other USB-powered devices.
• DC 출력 : The 12V/10A DC output can power compatible 12V devices. Activate by pressing the 'DC' button.

Figure 3: The AC180 features 11 outlets for diverse power needs.

BLUETTI App Control

Download the BLUETTI app to monitor and control your AC180 remotely via Bluetooth. The app provides real-time data on power consumption, battery status, and allows you to adjust settings.

Figure 4: Real-time control and monitoring via the BLUETTI app.

충전 옵션

The BLUETTI AC180 offers multiple ways to recharge its internal battery:

• AC 벽면 콘센트: Utilize the included AC charging cable for rapid recharging. The unit supports 1440W Flash Charge, allowing it to reach 80% in approximately 45 minutes and full charge in 1 hour.
• 태양광 패널: Connect the 100W solar panel using the provided solar charging cable. The AC180 can be fully replenished in 11.5-23 hours depending on sunlight conditions.
• 자동차 충전: Use the car charging cable to recharge the unit from your vehicle's 12V port.

Figure 5: Multiple charging options including AC, solar, and car charging.

태양광 패널 사용

The included 100W monocrystalline solar panel offers a cell efficiency of 23.4%. For optimal charging, position the solar panel directly towards the sun and ensure it is not shaded.

Figure 6: The 100W solar panel for efficient solar recharging.

BLUETTI Charger 1 (Optional Accessory)

For even faster on-the-go charging, the BLUETTI Charger 1 (500W Max input for AC180) can be used. This accessory provides 5X faster charging speed compared to a standard 12V/8A car cigarette lighter charger.

Video 1: Demonstrates the use of BLUETTI Charger 1 for rapid in-car charging of the AC180.

안전 정보

The BLUETTI AC180 is built with multiple safety features to ensure reliable operation:

• LiFePO4 배터리: Utilizes a Flame-Free LFP Battery technology, which undergoes 10,000+ tests to ensure zero fire or explosion risk.
• Smart Battery Management System (BMS): The integrated BMS protects each cell from overcharge, overcurrent, overheating, and other potential issues.
• 다중 보호 쉘: 견고한 casing is designed to be shockproof, short-circuit resistant, and leak-resistant.

Figure 7: Internal safety features including LiFePO4 battery and BMS.

유지

To ensure the longevity and optimal performance of your BLUETTI AC180, follow these maintenance guidelines:

• 본 제품은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• Charge the unit to at least 80% every 3-6 months if not in regular use to preserve battery health.
• 과열을 방지하기 위해 통풍구에 먼지와 이물질이 들어가지 않도록 하십시오.
• 외부를 부드럽고 마른 천으로 닦으십시오. 강한 화학 약품이나 연마제를 사용하지 마십시오.

문제 해결

If you encounter issues with your AC180, try the following common troubleshooting steps:

• 장치가 켜지지 않음: 배터리가 충전되어 있는지 확인하세요. 충전되어 있지 않으면 전원에 연결하세요.
• AC/DC/USB 포트에서 출력이 없습니다. Verify that the respective AC or DC output buttons are pressed and their indicators are lit. Check if the device you are trying to power is within the unit's wattag제한합니다.
• 과부하 보호: If an overload occurs, the unit may shut down. Disconnect the overloaded device, restart the AC180, and try again with a lower-power device.
• 디스플레이 문제: If the display shows incorrect battery percentage or input/output, ensure the unit is fully charged until the input wattage drops to zero, indicating a complete charge cycle.

명세서

보증 및 지원

BLUETTI offers a 5-year coverage on the AC180 Solar Generator. For any questions, technical assistance, or warranty claims, please contact BLUETTI customer support. Refer to the official BLUETTI web구체적인 연락처 정보는 해당 사이트나 구매 문서를 참조하세요.

Figure 8: The AC180 comes with a 5-year warranty for peace of mind.