소개
This manual provides detailed instructions for the installation, operation, and maintenance of your HOMEPILOT Numeric Keypad for garage door openers. This device offers convenient, keyless access to your garage by allowing you to open and close your garage door using a personalized code. It is designed to be compatible with HomePilot Classic and Premium Smart garage door opener models.
안전 정보
- 설치 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
- Ensure the keypad is installed in a location that does not obstruct the garage door's movement.
- Keep the keypad clean and free from debris to ensure proper function.
- Do not attempt to repair the device yourself. Contact HOMEPILOT support for assistance.
- 현지 규정에 따라 배터리를 폐기하십시오.
패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- HOMEPILOT Numeric Keypad for motorized garage door
- 장착 하드웨어(나사, 앵커)
- Batteries (Lithium Metal, included)
- 사용 설명서
제품 끝view
The HOMEPILOT Numeric Keypad provides secure and convenient access to your garage. It features a durable, weather-resistant design with a hinged cover to protect the keypad from environmental elements. The keypad is battery-powered and communicates wirelessly with your HomePilot garage door opener.
Image: The HOMEPILOT Numeric Keypad with its protective cover closed, displaying a sleek black design.
주요 특징:
- Customizable Code: Set a personal access code of up to 8 digits.
- 배터리 구동: Operates on included batteries, eliminating the need for external wiring.
- IP 보호: Hinged cover protects the keypad from moisture and ensures long-term reliability.
- 듀얼 채널 제어: Two radio channels allow control of up to two separate garage door motors.
- 시각적 및 청각적 피드백: Correct or incorrect code entry is confirmed by illuminated buttons (green/red) and an audible signal.
설정
1. 배터리 설치
- Open the hinged cover of the keypad.
- 배터리함을 찾습니다.
- Insert the provided Lithium Metal batteries, ensuring correct polarity (+/-).
- 배터리 칸을 단단히 닫으세요.
2. 키패드 장착
Choose a suitable location near your garage door, ensuring it is easily accessible but protected from direct impact. The keypad is designed for outdoor use with its IP protection.
- Mark the desired mounting points on the wall using the keypad as a template.
- Drill pilot holes if necessary, suitable for the provided mounting hardware.
- Secure the keypad to the wall using the screws and anchors.
- Ensure the keypad is firmly attached and does not wobble.
Image: The HOMEPILOT Numeric Keypad with its protective cover open, revealing the numeric buttons for code entry.
작동 지침
1. Programming Your Access Code
The factory code can be reprogrammed with a new code of a minimum of one digit and a maximum of eight digits. For example, the new code can be "8" or "55667788".
- 키패드 커버를 엽니다.
- Refer to your HomePilot garage door opener manual for specific pairing instructions. Generally, this involves putting the garage door opener into programming mode.
- On the keypad, enter your desired new code (1 to 8 digits).
- Press the '#' key to confirm the code.
- The keypad will provide visual (green light) and audible feedback to confirm successful programming.
2. Opening/Closing the Garage Door
- 키패드 커버를 엽니다.
- Enter your programmed access code.
- '#' 키를 누르세요.
- The garage door will activate (open or close). Correct entry is indicated by a green light and an audible signal. Incorrect entry is indicated by a red light.
Image: A hand pressing a button on the HOMEPILOT Numeric Keypad, demonstrating typical usage.
3. Controlling Multiple Doors (Dual Channel)
The keypad features two radio channels, allowing you to control up to two different garage door motors. This is ideal for multi-family homes or properties with multiple garage doors.
- During the programming phase, assign a specific channel (e.g., Channel 1 or Channel 2) to each garage door opener. Consult your HomePilot garage door opener manual for details on channel assignment.
- When entering your code, you may need to press an additional button (e.g., '*' or a specific number) before or after your code to select the desired channel, depending on your specific setup. Refer to your HomePilot system documentation for exact channel selection procedures.
유지
배터리 교체
The keypad is powered by Lithium Metal batteries. When the batteries are low, the keypad's response may become inconsistent, or the backlight may dim. Replace batteries promptly to ensure continuous operation.
- 경첩 덮개를 엽니다.
- Carefully remove the old batteries from the compartment.
- Insert new Lithium Metal batteries, observing correct polarity.
- Close the battery compartment and the hinged cover.
청소
키패드를 청소하려면 부드러운 천을 사용하십시오.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the surface or internal components. Ensure the keypad is dry before closing the cover.
문제 해결
- 키패드가 응답하지 않습니다. Check battery levels and replace if necessary. Ensure the keypad is within range of the garage door opener.
- Garage door not opening/closing: Verify that the correct code is being entered. Re-program the code if unsure. Check the garage door opener itself for any issues.
- Incorrect code entry feedback (red light): Re-enter the code carefully. If the issue persists, try reprogramming the code.
- 간섭: If experiencing intermittent issues, check for potential sources of radio interference near the keypad or garage door opener.
명세서
| 제조업체 | DELTA DORE RADEMACHER GmbH |
| 모델 번호 | 16991003 |
| 제품 치수 | 9 x 8 x 4.5cm |
| 무게 | 150그램 |
| 전원 | 1 x 리튬 금속 배터리(포함) |
| 재료 | Kunststoff(플라스틱) |
| 색상 | 회색 |
| 특징 | 도난 방지 |
| 전송 주파수 | 433.9MHz |
| 전송 전력 | 최대 10mW |
보증 정보
HOMEPILOT products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official HOMEPILOT web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
지원하다
If you encounter any issues or have questions not covered in this manual, please contact HOMEPILOT customer support. Contact information can typically be found on the HOMEPILOT web사이트 또는 제품 포장에 표시되어 있습니다.
추가 지원을 받으려면 다음을 방문하세요. HOMEPILOT Store on Amazon.
