Bingfu 20-1300MHz Police Scanner Antenna User Manual

소개

This manual provides instructions for the proper installation, operation, and maintenance of your Bingfu 20-1300MHz Police Scanner Antenna. This antenna is designed for broad frequency reception, compatible with various public radio scanners, ham radios, and two-way radio systems. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Image: Two Bingfu 20-1300MHz Police Scanner Antennas. Each antenna features a flexible whip, a magnetic base, and a coaxial cable terminating in a BNC male connector.

제품 특징

• 넓은 주파수 범위: Operates across 20MHz to 1300MHz, covering HF, VHF, and UHF bands.
• Magnetic Base Mounting: Provides secure and flexible placement on metallic surfaces.
• BNC Male Connector: Ensures compatibility with a wide range of radio equipment.
• 전 방향 : Designed to receive signals from all directions.
• 내구성 있는 구조: Built for reliable performance in various environments.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 2 x Bingfu 20-1300MHz Police Scanner Antennas (each with magnetic base and BNC male connector cable)

명세서

Image: Detailed dimensions of the antenna, including its height, base diameter, and cable length.

설정

1. 장착 위치를 선택하세요: Select a flat, metallic surface for the magnetic base. For optimal reception, a high, unobstructed location is recommended, such as a vehicle roof or a metal filing cabinet. Ensure the surface is clean and dry to maximize magnetic adhesion.


Image: Antenna mounted on a vehicle roof, illustrating a typical outdoor installation.

2. Secure the Antenna: Place the magnetic base firmly onto the chosen metallic surface. The strong magnet will hold the antenna in place.
3. 케이블 연결: Carefully route the 3-meter (10-foot) coaxial cable to your radio device, avoiding sharp bends or pinching that could damage the cable.
4. 장치에 연결: Attach the BNC male connector at the end of the cable to the BNC female antenna input port on your compatible radio scanner or ham radio. Ensure a secure connection by twisting the connector until it locks into place.


Image: Illustration of connecting the BNC male connector to a radio device.

작동 지침

Once the antenna is securely installed and connected to your radio device, power on your device and begin scanning or tuning to desired frequencies within the 20MHz to 1300MHz range. The omni-directional design allows for reception from various directions without needing to reorient the antenna.

Image: Antenna in use with a car radio, demonstrating enhanced channel reception.

호환 장치

This antenna is compatible with a wide range of radio scanners and ham radios, including but not limited to:

• Uniden Radio Scanners: SR30C, BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330.
• Whistler Radio Scanners: WS1040, WS1088, WS1010, WS1080, WS1025, WS1065, TRX1, TRX2.
• Radio Shack Radio Scanners: PRO-2018, PRO-197, PRO-650, PRO-163, PRO-405, PRO-528, PRO-668, PRO-94, PRO-404, PRO-95, PRO-62, PRO-83.
• Ham Radios:
  • TK100, TK200, TK210, TK220, TK300, TK310, TK320
  • Icom: IC-V8, IC-V80, IC-V82, IC-U82, IC-W32
  • Motorola: HT440, HT90
  • Maxon: HR, CP500, CP520, 1015
  • Vertex Standard: 734, 834, HR146, HX300, HX320, HX400, CU32, CP/CS 5015, 0420
  • Uniden: HH979
  • Wilson: HH152, HH154, HH156, HH462, HH464

유지

안테나의 수명 연장과 최적의 성능을 보장하려면 다음 유지 관리 지침을 따르십시오.

• 정기 청소: Periodically wipe the antenna whip and magnetic base with a soft, damp 먼지, 오물, 이물질을 제거하는 데 천을 사용하십시오. 연마성 세제는 사용하지 마십시오.
• 연결 검사: Regularly check the BNC connector and cable for any signs of wear, corrosion, or damage. Ensure the connection remains secure.
• 케이블 관리: Avoid kinking, twisting, or sharply bending the coaxial cable. Do not pinch the cable in doors or windows, as this can damage the internal wiring and affect signal quality.
• Magnetic Base Integrity: Ensure the magnetic base remains clean and free of metallic particles that could scratch mounting surfaces or reduce magnetic adhesion.
• 환경 노출: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., heavy rain, snow, direct saltwater spray) may accelerate wear. Consider removing the antenna during severe weather if possible.

문제 해결

안테나에 문제가 발생하면 다음 문제 해결 단계를 고려해 보세요.

• 수신 불량:
  • Ensure the antenna is mounted on a metallic surface for proper grounding, which is crucial for magnetic base antennas.
  • Relocate the antenna to a higher or more open area, away from obstructions like buildings, trees, or other electronic devices that may cause interference.
  • Verify that the BNC connector is securely attached to your radio device.
  • Check the coaxial cable for any visible damage or sharp bends.
  • Confirm your radio device is correctly tuned to the desired frequency and is compatible with the antenna's frequency range.
• Antenna Not Sticking:
  • Ensure the mounting surface is clean, flat, and made of a ferromagnetic metal.
  • Remove any debris or rust from both the magnetic base and the mounting surface.
• 간헐적 신호:
  • 모든 연결부가 헐거워지지 않았는지 확인하십시오.
  • Inspect the cable for internal breaks by gently flexing it while monitoring signal strength.

Image: Demonstrating consistent signal reception for mobile radio users.

보증 및 지원

Specific warranty details are not provided in this manual. For information regarding warranty coverage, returns, or technical support, please contact the seller or manufacturer directly through their official channels. You may also visit the BINGFU Store on Amazon 추가 제품 정보 및 문의 사항은 다음을 참조하십시오.