CLAGE CEX-U 전자식 순간 온수기 사용 설명서

1. 서론

Thank you for choosing the CLAGE CEX-U Electronic Instantaneous Water Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read these instructions carefully before installation and use, and keep them for future reference.

The CLAGE CEX-U is an electronically controlled instantaneous water heater designed for under-sink mounting in kitchens, providing hot water precisely when needed. Its compact design and accurate temperature selection ensure comfort and efficiency.

2. 안전 지침

중요한: 이러한 안전 지침을 따르지 않을 경우 감전, 화재 또는 부상을 입을 수 있습니다.

• 전문 설치 필요: The installation of this non-plug-in device must be carried out by a qualified electrician or a registered specialist in accordance with local regulations and wiring rules.
• 전기 연결: Ensure the electrical supply matches the specifications of the appliance (400 V, 11-13.5 kW). The device must be properly grounded.
• 물 연결: All water connections must be performed by a qualified plumber. Ensure all connections are watertight to prevent leaks.
• 작동 온도: The water heater delivers hot water up to 60°C. Exercise caution to prevent scalding, especially with children or individuals with reduced physical, sensory, or mental capabilities.
• 유지: 유지 관리나 청소를 수행하기 전에 전원 공급 장치를 분리하십시오.
• 손상: 제품이 손상된 경우 작동하지 마십시오. 자격을 갖춘 기술자에게 수리를 의뢰하십시오.

3. 제품 오버view

The CLAGE CEX-U is an advanced electronic instantaneous water heater designed for efficient hot water supply.

주요 특징:

• Electronically regulated for precise temperature control.
• Pressure-resistant design, compatible with both pressure-resistant and pressure-free fittings.
• Compact dimensions for easy under-sink installation.
• Sensor button control panel with LED display for accurate temperature input between 20°C and 60°C.
• Suitable for reheating pre-heated water, such as from a solar system.
• Smart Control via Smartphone App (Special Feature).

그림 1: 앞쪽 view of the CLAGE CEX-U Electronic Instantaneous Water Heater, showing the LED display and sensor control buttons.

4. 설정 및 설치

Installation of the CLAGE CEX-U must be performed by a qualified professional. This section provides general guidance.

4.1 설치 위치

The unit is designed for under-sink mounting. Ensure there is sufficient space for the appliance and its connections. The compact dimensions (approximately 31 x 31 x 11 cm) allow for installation under most kitchen sinks.

그림 2: The CLAGE CEX-U installed under a kitchen sink, illustrating its compact size (approx. 29.4 cm height, 17.7 cm width, 10.4 cm depth) and external 10 cm water connections. The image also indicates "Made in Germany".

4.2 Electrical Connection (400 V)

The appliance requires a 400 V, 3-phase electrical supply. The power setting (11 kW or 13.5 kW) is adjustable during installation. A power cable (approx. 65 cm) for a 3-phase cooker connection box is included. This connection must be made by a qualified electrician.

4.3 물 연결

The CLAGE CEX-U is suitable for both pressure-resistant and pressure-free fittings. The external water connections are designed for easy installation.

그림 3: Installation diagram showing two configurations for the CLAGE CEX-U with a 400 V power supply. The left diagram illustrates standard installation with a pressure-free fitting. The right diagram shows installation with a pressure-resistant fitting, including a T-piece and pressure hose (supplied). Both diagrams emphasize professional installation.

그림 4: The CLAGE CEX-U installed discreetly under a kitchen sink, demonstrating its space-saving design. The image highlights features such as desired temperature setting via sensor buttons, no mixing with cold water, a large LED display, instant hot water without waiting, and an optional remote control.

5. 사용 설명서

The CLAGE CEX-U features an intuitive sensor button control panel with an LED display.

5.1 온도 선택

1. 기기의 전원이 켜져 있는지 확인하십시오.
2. 사용하세요 + 그리고 - sensor buttons on the control panel to adjust the desired water temperature. The LED display will show the selected temperature.
3. The temperature can be set accurately between 20°C and 60°C.
4. Once the desired temperature is set, open the hot water tap. The unit will instantly heat the water to the selected temperature.

5.2 스마트 제어 (선택 사항)

If your model includes the Smart Control feature, you can manage settings via a smartphone application. Refer to the separate Smart Control manual or app instructions for detailed usage.

6. 유지관리

정기적인 유지보수는 온수기의 수명 연장과 효율적인 작동을 보장합니다. 유지보수를 수행하기 전에는 항상 전원을 차단하십시오.

6.1 외부 청소

• 외부를 닦으세요asing는 부드러운 d로 발음합니다.amp 옷감.
• 연마성 세척제, 용제 또는 독한 화학 물질은 표면을 손상시킬 수 있으므로 사용하지 마십시오.

6.2 석회질 제거

In areas with hard water, limescale can build up inside the appliance, affecting performance. Descaling should be performed by a qualified technician. The frequency depends on water hardness and usage.

6.3 일반 검사

Periodically check for any signs of leaks or unusual noises. If any issues are detected, contact a qualified service technician immediately.

7. 문제 해결

고객 서비스에 문의하기 전에 다음과 같은 일반적인 문제를 확인하세요.

For issues not listed here or if solutions do not resolve the problem, please contact CLAGE customer support or a qualified service technician.

8. 사양

Detailed technical specifications for the CLAGE CEX-U Electronic Instantaneous Water Heater.

9. 보증 및 지원

For warranty information, technical support, or service requests, please refer to the warranty card included with your product or visit the official CLAGE website. Ensure you have your model number (CEX-U, 2400-26413) and purchase date available when contacting support.

Visit CLAGE Official Web대지