소개
This manual provides essential information for the safe assembly, operation, and maintenance of your CLP Lex Fabric Bar Stool. Please read these instructions carefully before use and retain them for future reference.
안전 정보
- 조립하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 파손된 경우 사용하지 마십시오.
- Assemble the stool on a soft, clean surface to prevent scratches.
- 모든 나사와 볼트를 단단히 조이세요. 정기적으로 점검하고 필요하면 다시 조이세요.
- Do not stand on the stool. It is designed for seating only.
- 최대 중량 용량 100kg(220파운드)을 초과하지 마십시오.
- 어린이가 조립 구역에 접근하지 못하도록 하세요. 작은 부품은 질식 위험을 초래할 수 있습니다.
- 넘어지지 않도록 의자를 평평하고 안정적인 표면에 놓으십시오.
최대 하중 용량: 100kg.
패키지 내용
패키지에 다음 구성품이 모두 포함되어 있는지 확인하세요.
- Seat (1x)
- Gas Lift Cylinder (1x)
- 베이스(1x)
- Footrest Ring (1x)
- 장착 하드웨어(나사, 와셔, 육각 렌치)
- Floor Protector (pre-installed on base or separate)
조립 설명서
Follow these steps to assemble your CLP Lex Bar Stool:
- Attach the Footrest Ring: Carefully insert the footrest ring into the designated slot on the gas lift cylinder. Ensure it is firmly seated.
- 가스 리프트를 베이스에 삽입하세요: Place the large circular base on a flat surface. Insert the wider end of the gas lift cylinder into the central hole of the base. The gas lift should sit securely in the base.
- 가스 리프트에 좌석 부착: Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen key. Ensure all screws are tightened evenly and securely.
- 최종 확인: Once assembled, gently test the stability of the stool. Ensure all connections are tight and the stool does not wobble.
Images illustrating the stool's base and metal frame components for assembly.
작동 지침
The CLP Lex Bar Stool features adjustable height and 360-degree swivel functionality for optimal comfort and versatility.
- 높이 조정: To adjust the seat height, locate the lever under the seat.
- To raise the seat: Lift the lever while standing up, allowing the gas lift to extend. Release the lever at the desired height.
- To lower the seat: Lift the lever while seated, applying slight pressure to the seat. Release the lever at the desired height.
- 360도 회전: The seat can freely rotate 360 degrees. Simply turn the seat in any direction to adjust your position.
Video demonstrating the height adjustment and 360-degree swivel features of the bar stool.
유지 보수 및 관리
적절한 관리를 통해 바 스툴의 수명과 외관을 오래 유지할 수 있습니다.
- 패브릭 커버:
- Regularly vacuum the fabric to remove dust and loose particles.
- 액체를 쏟은 경우, 깨끗하고 마른 천으로 즉시 닦아내세요. 문지르지 마세요.
- For stubborn stains, use a mild fabric cleaner according to the product instructions. Test on an inconspicuous area first.
- 퇴색을 방지하기 위해 직사광선을 피하십시오.
- Metal Frame (Chrome):
- 부드러운 천으로 닦아주세요amp 옷감.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the chrome finish.
- 물 얼룩이 생기지 않도록 깨끗한 천으로 즉시 닦아 말리십시오.
- 일반적인:
- Periodically check all screws and bolts and re-tighten them to ensure stability.
- Ensure the floor protectors on the base are intact to prevent scratching your floor.
Ensure floor protectors are in place and clean the stool regularly.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조립 후 의자가 흔들거립니다. | 나사가 완전히 조여지지 않았거나 고르지 않게 조여졌습니다. | Check and re-tighten all assembly screws evenly. Ensure the stool is on a flat surface. |
| Height adjustment not working smoothly. | Gas lift mechanism may be stiff or obstructed. | Ensure no obstructions are blocking the lever. Apply slight pressure to the seat when lowering, or stand up completely when raising. If the issue persists, contact customer support. |
| Stool makes noise when swiveling. | Lack of lubrication in the swivel mechanism or loose connection. | Check if the seat is securely attached to the gas lift. A small amount of silicone spray lubricant might help if the noise is from the swivel mechanism (apply sparingly and wipe excess). |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 법률 |
| 상표 | 씨엘피(CLP) |
| 전체 높이 | 89~110cm (조절 가능) |
| 전체 폭 | 45cm |
| 전체 깊이 | 46cm |
| 좌석 높이 | 59~80cm (조절 가능) |
| 좌석 크기(가로x세로) | 45.5 x 38cm |
| 등받이 높이 | 32cm |
| 발판 높이 | 19~40cm |
| 중량 용량 | 100kg |
| 제품 무게 | 6kg |
| 프레임 소재 | 금속(크롬) |
| 좌석 소재 | 폴리에스터 원단 |
| 조립이 필요합니다 | 예 |
| 특별 기능 | Adjustable Height, Swivel, Footrest |
Detailed dimensions of the CLP Lex Bar Stool.
보증 및 지원
Your CLP Lex Bar Stool is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please contact CLP customer service through the retailer where you purchased the product or visit the official CLP web대지.
For more information about CLP products, visit the CLP Store on Amazon.
