ASPERX AX2500 차량용 점프 스타터 사용 설명서

소개

The ASPERX AX2500 Car Jump Starter is a portable, multi-functional device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer various lighting modes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Image: The ASPERX AX2500 Car Jump Starter unit, smart jump cables, wall charger, USB Type-C cable, storage case, and cigarette lighter adapter.

상자 안에 무엇이 들어있나요?

• ASPERX 2500A Portable Car Jump Starter x1
• 스마트 점프 케이블 1개
• 5V/3.0A 벽면 충전기 x1
• USB Type-C 충전 케이블 x1
• 보관 케이스 x1
• 시가 라이터 어댑터 x1
• 사용 설명서 x1

제품 끝view

주요 특징

• 강력한 차량용 점프 스타터: 2500A peak current, capable of starting 12V vehicles with up to 10.0L Gas or 7.3L Diesel engines. Operates in extreme climates (-4°F to 140°F).
• 10가지 업그레이드 보호 기능: Features zero voltage start function and automatically detects reverse polarity for safe connections. Notifies incorrect use with flashing lights.
• 휴대용 전원 공급 장치: Equipped with 2 USB outputs (5V/3A and 5V/2.1A), including a Quick Charge 3.0 USB port for fast charging of mobile devices.
• LED 손전등: Includes four modes: Flash Light, Strobe Light, SOS Light, and Red Warning Light. Supports up to 60 hours of high-brightness lighting.

이미지: 상세 view of the ASPERX AX2500 showing its various ports including USB-C, USB-A, and the 12V Jumper Cable port.

설정

점프 스타터 충전

1. Connect the USB Type-C Charging Cable to the jump starter's USB-C input port.
2. Plug the other end of the USB Type-C cable into the provided 5V/3.0A wall charger.
3. 벽면 충전기를 전원 콘센트에 꽂습니다.
4. The battery indicator lights on the jump starter will illuminate to show charging progress. Ensure the unit is fully charged before first use.

It is recommended to fully charge the jump starter every 3-6 months to maintain optimal battery health, even when not in use.

작동 지침

귀하의 차량을 점프 시동

Before attempting to jump-start, ensure the jump starter has at least 50% charge. For optimal performance, a full charge is recommended.

Image: Visual guide illustrating the four steps to jump-start a vehicle: Insert, Connect, Ready, Start.

1. Step 1: Insert Smart Jump Cable
   Insert the blue end of the smart jump cable into the 12V Jumper Cable port on the jump starter. Ensure a secure connection.
2. Step 2: Connect to Car Battery
   빨간색 CL을 붙입니다.amp 차량 배터리의 양극(+) 단자와 검은색 클립을 연결하세요.amp (-) 단자에.
3. Step 3: Check LED Indicator
   The smart jump cable has an LED indicator. A solid green light indicates a correct connection and that the jump starter is ready. If the light is red or flashing, check connections and battery status.
4. Step 4: Start Vehicle
   Once the LED indicator is solid green, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again.
5. 5단계: 연결 해제
   After the vehicle starts, immediately remove the smart jump cable clamps from the car battery terminals, then disconnect the cable from the jump starter.

휴대용 보조베터리로 사용하기

The AX2500 can charge various electronic devices:

• Connect your device's USB charging cable to one of the two USB output ports (5V/3A or 5V/2.1A) on the jump starter.
• 퀵 차지 3.0 포트는 호환되는 기기에 더 빠른 충전 속도를 제공합니다.

LED 손전등 작동 방법

The built-in LED light offers multiple modes for different situations:

1. Press and hold the power button for 3 seconds to turn on the flashlight (Flash Light mode).
2. Tap the power button again to cycle through Strobe Light, SOS Light, and Red Warning Light modes.
3. Press and hold the power button for 3 seconds to turn off the flashlight.

Image: The ASPERX AX2500 displaying its Normal, Strobe, SOS, and Red Warning light modes, highlighting its use as an emergency rescuer.

유지

• 점프스타터는 직사광선과 습기가 없는 서늘하고 건조한 곳에 보관하세요.
• Recharge the unit fully every 3-6 months to prolong battery life, even if not used.
• 장치를 깨끗하고 먼지나 이물질이 없는 상태로 유지하십시오.

문제 해결

• Jump Starter Not Activating: Ensure the unit is charged above 50%. Check all cable connections for proper seating.
• Smart Jump Cable Indicator Light Issues: If the indicator is red or flashing, recheck the connections to the battery terminals. Ensure terminals are clean and free of corrosion.
• Vehicle Not Starting After Connection: Ensure the jump starter has sufficient charge. If the battery is completely dead, you may need to use the boost function (refer to the smart cable instructions for specific boost activation).
• 장치가 충전되지 않음: Verify that the charging cable and wall adapter are correctly connected and functioning. Try a different USB-C cable or adapter if available.

명세서

보증 및 지원

The ASPERX AX2500 Car Jump Starter comes with 2-Years Technical Support. For any after-sales questions or assistance, please contact AsperX customer service.