제품 끝view
The DEWALT 20V MAX Cordless Drill Driver (DCD777D1) is designed for a wide range of drilling and fastening applications. This compact and lightweight tool features a brushless motor for extended runtime and durability, a 2-speed transmission, and a 1/2 inch single-sleeve ratcheting chuck. It is suitable for both professional and DIY users requiring mobility and power in a compact package.
무엇이 포함됩니까?
DEWALT DCD777D1 키트에는 다음 구성품이 포함되어 있습니다.
- DEWALT DCD777 20V MAX* Brushless Compact Drill/Driver
- DCB203 20V MAX* 2Ah Battery
- DCB107 12V MAX*/20V MAX* Charger
- 도구 가방
설정
1. 배터리 설치 및 충전
Ensure the battery is fully charged before first use. To install the battery, align the battery pack with the base of the tool and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery out. The included charger (DCB107) is compatible with 12V MAX* and 20V MAX* batteries. Simply slide the battery onto the charger until it clicks. The charger will indicate charging status with LED lights.
2. 비트 설치
To install a drill bit or driver bit, rotate the chuck counter-clockwise to open the jaws. Insert the bit into the chuck, ensuring it is seated firmly. Rotate the chuck clockwise to tighten the jaws around the bit. Hand-tighten the chuck for a secure grip.
작동 지침
1. 전원 켜기/끄기 및 속도 조절
The tool is activated by pressing the trigger switch. The speed is variable and controlled by the amount of pressure applied to the trigger. For slower speeds, apply less pressure; for faster speeds, apply more pressure. Release the trigger to turn off the tool.
2. 2단 변속기
The DCD777D1 features a 2-speed transmission for versatility. Use speed setting '1' for high torque applications (e.g., driving large fasteners) and speed setting '2' for high-speed drilling applications. The speed selector switch is located on top of the tool.
3. Clutch/Torque Settings
The adjustable clutch ring allows you to select the appropriate torque setting for your application, preventing overtightening or stripping screws. Rotate the clutch ring to align the desired number with the arrow on the drill body. Higher numbers provide more torque. For drilling, select the drill icon setting.
4. 정방향/역방향 제어
The forward/reverse button, located above the trigger, controls the direction of rotation. Push it to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Center the button to lock the trigger and prevent accidental activation.
5. LED 작업등
The integrated LED light illuminates the work area for increased visibility in dimly lit spaces. It activates when the trigger is pressed and remains on for approximately 20 seconds after the trigger is released.
유지
Regular maintenance ensures the longevity and optimal performance of your DEWALT drill. Keep the tool clean and free of debris. Periodically inspect the chuck for wear and ensure the battery contacts are clean. Store the tool and batteries in a dry, secure location away from extreme temperatures.
명세서
| 상표 | 듀얼 |
| 모델 번호 | DCD777D1 |
| 전원 | 배터리 구동 |
| 권tage | 최대 20V* |
| Amp에라 지 | 2 Amps |
| 최대 회전 속도 | 1500 RPM |
| 속도의 수 | 2 |
| 최대 척 크기 | 0.5 인치 |
| 무브러시 모터 | 예 |
| 특징 | Compact, Lightweight, LED Light |
| 제품 치수 | 12.5인치 길이 x 3.75인치 너비 x 9.81인치 높이 |
| 품목 무게 | 0.634온스(도구만) |
보증 및 지원
이 DEWALT 제품에는 다음이 포함됩니다. 3년 제한 보증. For detailed warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official DEWALT web해당 사이트를 참조하시거나, DEWALT 고객 서비스 센터에 직접 문의하여 도움을 받으실 수도 있습니다.
