SATLINK SP-2100 DVB-S/S2 Digital Satellite Finder Meter User Manual

1. 서론

The SATLINK SP-2100 is a DVB-S/S2 and MPEG-2/4 H.264 compliant handheld digital satellite finder meter. Designed for ease of use, this compact and lightweight device provides essential functions for the installation and verification of digital satellite TV services. It is suitable for both residential homes and multi-dwelling units, offering signal measurement, channel management, and system configuration capabilities.

2. 안전 정보

• 전원 공급 장치: Use only the provided DC12V/1.5A power adapter. Using an incorrect adapter may damage the device or cause fire.
• 배터리 관리 : The device contains a Li-Ion battery. Do not expose it to extreme temperatures, puncture, or disassemble. Dispose of batteries according to local regulations.
• 수분: 기기를 물이나 높은 습도로부터 멀리하십시오. 젖은 손으로 기기를 조작하지 마십시오.
• 통풍: 과열을 방지하기 위해 적절한 환기를 유지하세요. 환기구를 막지 마세요.
• LNB 단락 보호: The device features LNB short protection. If a short circuit is detected, disconnect the LNB immediately.
• 청소: 청소하기 전에 전원을 차단하십시오. 부드럽고 마른 천을 사용하십시오. 액체 세척제나 스프레이형 세척제는 사용하지 마십시오.

3. 제품 오버view

3.1 전면 패널 및 컨트롤

The front panel features a 3.5-inch TFT LCD screen for displaying menus and signal information, along with various control buttons and indicator lights.

이미지 3.1: 앞쪽 view of the SP-2100, highlighting the display and control interface.

• LCD 화면: 3.5-inch High Definition TFT LCD (320x240 RGB) for menu navigation and signal display.
• 지표: Power (red), 13V/18V (green for LNB power), Lock (signal lock), Charge (battery charging status).
• 탐색 버튼: MENU, OK, Directional Arrows (Up, Down, Left, Right), EXIT.
• 기능 키: F1, F2, F3, F4 (context-sensitive functions).
• 숫자 키패드: 0-9 for data entry.
• 특수 기능 버튼: MUTE, SCAN, SAT, BACK, PAUSE, INFO, TV/R.

3.2 후면 패널

The rear panel includes product information and the integrated speaker.

이미지 3.2: 뒤쪽 view of the SP-2100, indicating the speaker and product label.

3.3 Side and Top Ports

Various input and output ports are located on the sides and top of the device.

이미지 3.3: 옆 view with HDMI, AV OUT, and AV IN ports.

이미지 3.4: 맨 위 view with F-connector, USB Type A, and DC power input.

• F-Male Connector: Satellite input (950-2150 MHz).
• USB 유형 A: For software upgrades and file transfer (USB 2.0).
• DC 입력 : Power adapter input (DC12V/1.5A).
• 전원 스위치: 기기의 켜짐/꺼짐 토글 스위치입니다.
• HD-MI OUT: HD-MI 1.3a output for connecting to an external display.
• AV 출력 : 3.5mm jack for composite video (CVBS) and stereo audio (L/R) output.
• AV 입력 : 3.5mm jack for composite video (CVBS) and stereo audio (L/R) input.

4. 설정

4.1 배터리 충전

Before first use, fully charge the internal Li-Ion battery. Connect the provided DC12V/1.5A power adapter to the DC IN port on the device and plug it into a power outlet. The 'Charge' indicator light will illuminate during charging. A full charge typically takes several hours and provides approximately 3 hours of operation time.

4.2 전원 켜기/끄기

Locate the power switch on the side of the device. Toggle the switch to the 'ON' position to power on the meter. The 'Power' indicator light will turn red. To power off, toggle the switch to the 'OFF' position.

4.3 Connecting to LNB

Connect the satellite cable from your LNB (Low Noise Block) to the F-Male connector on the top of the SP-2100. Ensure the connection is secure. The device will supply 13V or 18V to the LNB, indicated by the green '13V/18V' light.

이미지 4.1: Connection diagram showing LNB, power, and AV/HDMI connections.

5. 사용 설명서

5.1 메뉴 탐색

사용하세요 메뉴 button to access the main menu. Navigate through options using the directional arrow buttons (Up, 아래에, 왼쪽, 오른쪽). 누르다 OK to confirm a selection or enter a submenu. Press EXIT 이전 화면으로 돌아가거나 메뉴를 종료합니다.

5.2 메인 메뉴 기능

• 설치: This section is used for satellite dish alignment and signal acquisition.
  • Select a satellite from the predefined list or add a new one.
  • Configure LNB type, frequency, and DiSEqC settings (1.0 / 1.1 / 1.2 and 22 kHz Tone supported).
  • Perform signal measurement to view signal strength and quality. Adjust the dish until optimal signal levels are achieved. The 'Lock' indicator will illuminate when a signal is acquired.
  • Supports Auto, Manual, and NIT Scan modes for channel searching.
• 채널 편집: Manage TV and radio channels. You can move, delete, or lock channels.
• 시스템 설정: Configure device settings such as OSD language, time, display brightness, and factory reset options.
• 공익사업: Access additional tools or features.
• 미디어 센터: 멀티미디어 재생 files (wma, mp3, mp4, avi, jpg, jpeg, bmp, img) from a USB storage device connected to the USB Type A port.
• 에 대한: Displays device information, including software version and hardware details.

5.3 신호 측정

In the 'Installation' menu, after selecting the satellite and transponder, the screen will display real-time signal strength and quality bars. Adjust your satellite dish azimuth and elevation slowly while observing these values. The goal is to maximize both strength and quality. The device will emit an audible tone and the 'Lock' LED will light up when a signal is successfully locked.

5.4 AV In/Out and HD-MI Output

• AV 입력 : Connect an external video source (e.g., CCTV camera) to the AV IN port to display its output on the SP-2100's screen.
• AV OUT / HD-MI OUT: Connect the SP-2100 to an external display (TV, monitor) using the AV OUT or HD-MI OUT ports to view the meter's screen on a larger display.

6. 유지관리

6.1 청소

Ensure the device is powered off and disconnected from all cables before cleaning. Use a soft, dry, lint-free cloth to wipe the screen and casing. Do not use abrasive cleaners, solvents, or spray directly onto the device.

6.2 배터리 관리

To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge the battery to approximately 50% and store it in a cool, dry place. Recharge every few months to prevent deep discharge.

6.3 소프트웨어 업그레이드

Software upgrades can be performed via the USB Type A port. Download the latest firmware from the official Satlink web대지. 펌웨어 복사 file to a USB flash drive, insert it into the SP-2100, and follow the on-screen instructions in the 'System Setting' or 'Utility' menu to initiate the upgrade process. Do not power off the device during an upgrade.

7. 문제 해결

• 전원 없음:
  • 전원 스위치가 'ON' 위치에 있는지 확인하세요.
  • Ensure the battery is charged. Connect the power adapter and check the 'Charge' indicator.
  • Verify the power adapter is correctly connected and functioning.
• No Signal / Low Signal Quality:
  • Ensure the LNB cable is securely connected to the F-connector.
  • Check LNB settings (type, frequency) in the 'Installation' menu.
  • Verify DiSEqC settings if using multiple LNBs or a DiSEqC switch.
  • Adjust the satellite dish alignment (azimuth, elevation, LNB skew) slowly and observe signal readings.
  • Check for any obstructions between the dish and the satellite.
• No Picture/Sound on External Display:
  • Ensure the AV or HD-MI cable is correctly connected to both the SP-2100 and the external display.
  • Select the correct input source on your external display (e.g., HDMI 1, AV).
• USB 장치가 인식되지 않음:
  • Ensure the USB device is formatted to NTFS, FAT32, or FAT16.
  • 다른 USB 장치를 사용해 보세요.

8. 사양

9. 패키지 내용

The SATLINK SP-2100 package includes the following items:

• 1x SP-2100 Digital Satellite Meter
• 1x AV 케이블
• 1x Power Adapter (DC12V/1.5A)
• 1x 캐리 백
• 영문 사용자 설명서 1부 (본 문서)

10. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local dealer. Keep your purchase receipt as proof of purchase for warranty claims. Software updates and additional resources may be available on the official Satlink web대지.