소개
Thank you for choosing the Nestling Wireless Doorbell Kit. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use and retain it for future reference.
This wireless doorbell system offers a reliable signal range of up to 300 meters (1000 feet), 55 selectable melodies, and 5 adjustable volume levels. The transmitter is IP55 waterproof, ensuring durability in various weather conditions.
Image: The Nestling Wireless Doorbell Kit, featuring the plug-in receiver and the push-button transmitter.
제품 특징
- Ultra-Reliable Transmission Range: Up to 300 meters (1000 feet) wireless signal coverage, ensuring you never miss a visitor.
- 55 Chimes and 5 Volume Levels: Choose from 55 distinct melodies and adjust the volume from 0 dB to 110 dB.
- LED Indicator with Silent Mode: A flashing blue LED provides a visual alert, ideal for silent mode or for individuals with hearing impairment.
- Durable and IP55 Waterproof: The outdoor transmitter is rated IP55, designed to withstand various weather conditions (operating from -22°F to 158°F).
- 긴 배터리 수명: The transmitter features a low-power consumption design with a high-quality battery, offering up to 3 years of life.
- 간편한 설치: Simple setup with no wiring required, offering adhesive or screw mounting options.
패키지 내용
The Nestling Wireless Doorbell Kit typically includes the following components:
- 1 x Wireless Transmitter (Push Button)
- 플러그인 수신기(차임벨 장치) 1개
- 12V 23A 배터리 1개 (송신기에 사전 설치됨)
- Mounting Hardware (Adhesive tape, Screws, Anchors)
- 1 x 사용자 설명서
안전 정보
- 기기를 어린이와 애완동물이 닿지 않는 곳에 보관하세요.
- 기기를 직접 분해하거나 수리하려고 하지 마십시오. 이는 보증을 무효화하고 기기 손상을 초래할 수 있습니다.
- Avoid exposing the receiver to water or high humidity. The transmitter is IP55 waterproof, but prolonged submersion should be avoided.
- 기기를 극한의 온도, 직사광선 또는 화염에 노출시키지 마세요.
- 사용한 배터리는 현지 규정에 따라 폐기하십시오.
설정 및 설치
1. 송신기(푸시 버튼) 설치
송신기는 제공된 접착 테이프 또는 나사를 사용하여 설치할 수 있습니다.
- 접착 장착:
- 설치하고자 하는 표면을 먼지와 습기가 없도록 깨끗하게 닦으십시오.
- Peel off one side of the double-sided adhesive tape and attach it to the back of the transmitter.
- Peel off the other side of the adhesive tape and firmly press the transmitter onto the cleaned surface. Hold for 30 seconds.
- 나사 장착:
- 송신기의 뒷면 덮개를 여세요.
- Mark the positions for drilling holes using the back cover as a template.
- Drill two holes and insert the provided wall anchors.
- Secure the back cover to the wall with the screws.
- Attach the transmitter unit to its secured back cover.
2. 수신기(차임벨 장치) 설치
Simply plug the receiver into any standard electrical outlet within range of the transmitter. Ensure it is not obstructed by large metal objects or thick walls for optimal performance.
Image: Visual guide for two installation methods: adhesive tape and screw mounting for the transmitter.
작업
1. 볼륨 조절
Press the volume button on the receiver to cycle through the 5 available volume levels (0 dB to 110 dB). Select the desired volume for your environment.
2. 멜로디 변경
Press the melody selection button on the receiver to cycle through the 55 available chimes. Stop pressing when you hear your preferred melody.
3. Silent Mode and LED Indicator
When the volume is set to 0 dB (silent mode), the receiver will only provide a visual alert via its blue LED indicator when the doorbell is pressed. This is useful for quiet environments or for users with hearing difficulties.
Image: The doorbell receiver highlighting its 55 chime tunes and 5 adjustable volume levels, suitable for various settings from silent to loud.
유지
1. 배터리 교체 (송신기)
The transmitter uses a 12V 23A alkaline battery. When the doorbell's range decreases or it stops working, it may be time to replace the battery.
- 송신기의 뒷면 덮개를 조심스럽게 여십시오.
- 기존의 12V 23A 배터리를 제거하십시오.
- 새로운 12V 23A 알칼리 배터리를 삽입할 때, 극성(+/-)을 정확히 확인하십시오.
- 뒷면 커버를 단단히 닫으세요.
2. 청소
Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface. Ensure the transmitter's push button is free of debris for optimal function.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 초인종이 울리지 않습니다. | 수신기 플러그가 뽑혔거나 전원이 꺼져 있습니다.tage. 송신기 배터리가 소진되었습니다. 기기가 통신 범위에서 벗어났거나 신호 간섭이 발생했습니다. | Ensure receiver is plugged in and powered. 송신기 배터리를 교체하십시오. Move receiver closer to transmitter; avoid large metal obstructions. |
| 짧은 전송 거리. | 송신기 배터리가 부족합니다. 유닛 간 장애물. 다른 전자 장치의 간섭. | 송신기 배터리를 교체하십시오. 장애물을 최소화하도록 장비 위치를 변경하십시오. 기기를 다른 전자제품과 떨어뜨려 놓으십시오. |
| 수신기 LED는 깜빡이지만 소리가 나지 않습니다. | Volume is set to 0 dB (silent mode). | Press the volume button to increase the volume level. |
명세서
| 상표 | 새 새끼 |
| 모델 | 무선 초인종 키트 |
| 색상 | 검은색 |
| 무선 범위 | 최대 300미터(1000피트) |
| 방수 등급(송신기) | IP55 |
| 멜로디 | 55 |
| 볼륨 레벨 | 5 (0 dB to 110 dB) |
| 송신기 배터리 | 1 x 12V 23A Alkaline (included) |
| 작동 온도 | -22°F ~ 158°F(-30°C ~ 70°C) |
| 패키지 크기 | 9.7 x 8.9 x 7.5cm |
| 무게 | 160그램 |
보증 및 지원
For warranty information, please refer to the documentation included with your product or contact the seller/manufacturer directly. If you encounter any issues or have questions regarding your Nestling Wireless Doorbell Kit, please reach out to customer support for assistance.
