Cisco Catalyst 9300L-24T-4G-E Switch User Manual

1. 이상view

The Cisco Catalyst 9300L-24T-4G-E is a high-performance, fixed-uplink network switch designed for enterprise access layer deployments. This model features 24 Gigabit Ethernet ports and 4 fixed 1 Gigabit Ethernet (1G) uplink ports, providing robust connectivity and advanced networking capabilities. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your switch.

2. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• 1 x Cisco Catalyst 9300L-24T-4G-E Switch
• 1 x 전원 공급 장치
• 3 x Field-replaceable Fans
• Rack-mount kit (may vary by supplier)
• 문서(이 매뉴얼, 안전 정보)

3. 물리적 설명

The front panel of the Cisco Catalyst 9300L-24T-4G-E switch provides all network ports, status indicators, and console access ports. Understanding the layout is crucial for proper installation and operation.

그림 1: 전면 패널 view of the Cisco Catalyst 9300L-24T-4G-E Switch. This image displays the 24 Gigabit Ethernet access ports, arranged in two rows of 12, and the 4 fixed 1 Gigabit Ethernet uplink ports located on the right side. Also visible are the console ports (USB-A and mini-USB) and various status LEDs on the left.

전면 패널 구성 요소:

• 상태 LED: Indicate overall system health and port activity.
• USB Console Port (Type-A and Mini-B): For local management access.
• 24개의 10/100/1000BASE-T 포트: 네트워크 장치 연결용 RJ-45 포트.
• 4 x 1G Fixed Uplink Ports: SFP ports for connecting to distribution or core layers.

4. 설정 및 설치

4.1 안전 예방 조치

Before installing, operating, or servicing the switch, review the safety warnings in the Cisco documentation. Ensure proper grounding and ventilation. Only qualified personnel should perform installation procedures.

4.2 풀기 및 검사

Carefully remove the switch and all components from the packaging. Inspect for any signs of damage during shipping. Report any damage to your supplier immediately.

4.3 랙 마운팅

The switch is designed for standard 19-inch rack mounting. Use the provided rack-mount kit to secure the switch in the rack. Ensure adequate space for airflow around the unit.

4.4 전원 연결

1. 스위치 뒷면에 있는 AC 전원 커넥터에 전원 코드를 연결하십시오.
2. 전원 코드의 다른 쪽 끝을 접지된 AC 전원 콘센트에 연결하십시오.
3. Ensure the power supply is securely seated and the power LED illuminates.

4.5 네트워크 케이블 연결

• Access Ports (1-24): Connect Ethernet cables from your end devices (computers, IP phones, wireless access points) to the RJ-45 ports on the front panel.
• Uplink Ports (1G 1-4): Insert appropriate SFP transceivers into the 1G uplink ports and connect fiber or copper cables to your distribution layer switches or routers.

4.6 Initial Console Access

For initial configuration, connect a console cable (USB Type-A to Mini-B or RJ-45 to serial, if applicable) from your management workstation to the console port on the switch. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.

5. 사용 설명서

5.1 전원 켜기 및 끄기

• 전원 켜기: After connecting the power cord, the switch will automatically power on. Observe the system LEDs for boot-up status.
• 전원 끄기 : To power off, disconnect the power cord from the AC outlet. For graceful shutdown, it is recommended to save the configuration and then disconnect power.

5.2 LED 표시등 이해

The front panel LEDs provide visual feedback on the switch's operational status:

• 시스템 LED: Indicates overall system health (e.g., green for normal operation, amber for warning, red for critical error).
• 포트 상태 LED: Indicate link status and activity for each network port (e.g., green for link, blinking green for activity, off for no link).
• 전원 공급 장치 LED: Indicate the status of the installed power supply.

Refer to the Cisco documentation for a detailed explanation of all LED states.

5.3 기본 구성

The Cisco Catalyst 9300L series switches are managed via the Cisco IOS XE operating system. Configuration can be performed using the Command Line Interface (CLI) via the console port or SSH, or through a web-based graphical user interface (GUI) if enabled. Basic configuration typically involves:

• Setting the hostname and domain name.
• Configuring IP addresses for management interfaces.
• Setting up user accounts and passwords.
• Enabling basic security features.
• Configuring VLANs and port assignments.

For detailed configuration procedures, consult the Cisco Catalyst 9300 Series Software Configuration Guide available on the Cisco web대지.

6. 유지관리

6.1 팬 모듈 교체

The switch includes field-replaceable fan modules. If a fan module fails, the system will typically generate an alert. To replace a fan module:

1. Power off the switch and disconnect all cables.
2. Locate the fan modules on the rear of the chassis.
3. Carefully remove the faulty fan module.
4. Insert the new fan module, ensuring it is properly seated.
5. Reconnect power and cables, then verify fan operation via system LEDs or CLI.

6.2 소프트웨어 업데이트

시스코를 정기적으로 점검하세요 website for the latest software releases and security patches for your Catalyst 9300L switch. Keeping the software up-to-date ensures optimal performance, stability, and security. Follow Cisco's recommended upgrade procedures carefully.

6.3 청소

Periodically clean the exterior of the switch and ensure ventilation openings are free from dust and debris. Use a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the switch.

7. 문제 해결

7.1 전원 문제

• 전원 없음: Verify the power cord is securely connected to both the switch and the power outlet. Check the power outlet with another device. Ensure the power supply is functional.
• 전원 LED 꺼짐: If the power LED is off, check the power source and connections. If issues persist, the power supply may be faulty.

7.2 연결 문제

• 포트에 링크가 없습니다: Check the cable connection at both ends. Verify the connected device is powered on and functioning. Check the port status LED; if off, try a different port or cable.
• 느린 성능: Check for duplex mismatches, excessive errors on the port, or network congestion. Verify cable quality and length.

7.3 System Errors

If the System LED indicates an error (e.g., amber or red), consult the Cisco documentation for specific error codes and recommended actions. Access the switch via console or SSH to view system logs for detailed error messages.

7.4 공장 초기화

A factory reset will erase all configurations and restore the switch to its default settings. This procedure should only be performed as a last resort and requires specific steps via the console interface. Refer to Cisco's official documentation for the exact procedure to avoid data loss or misconfiguration.

8. 사양

9. 보증 및 지원

This Cisco product is typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Cisco website. For technical support, product documentation, software downloads, and community forums, please visit the Cisco Support website. Ensure you have your product model number and serial number available when contacting support.

As this is a renewed product, warranty and support may be provided by the reseller. Please consult your reseller's terms for specific details regarding your purchase.