소개
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 2-in-1 Bathroom Exhaust Fan with Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
중요한 안전 정보
Always follow basic safety precautions when installing, operating, or maintaining electrical appliances. Failure to do so may result in fire, electric shock, or injury to persons.
- Disconnect power at the service panel before wiring or servicing this unit.
- 모든 배선은 지역 전기 규정 및 표준을 준수해야 합니다.
- 본 제품은 일반적인 환기 용도로만 설계되었습니다. 위험하거나 폭발성 물질 및 증기를 배출하는 용도로는 사용하지 마십시오.
- To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
- 감전을 방지하려면 올바르게 접지하십시오.
- 조리 공간에 설치하지 마십시오.
- 설치하는 동안에는 항상 안전 안경과 장갑을 착용하세요.
제품 끝view 및 기능
The OREiN 2-in-1 Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features a quiet operation and selectable color temperature LED lighting.
The OREiN 2-in-1 Bathroom Exhaust Fan with Light, showcasing its integrated design and the three selectable light color temperatures (3000K, 4000K, 5000K) at the bottom.
Diagram illustrating the premium materials and components, including the heavy-duty housing, powerful motor, easy installation bracket, and energy-efficient LED light.
Visual comparison demonstrating the powerful 100 CFM airflow, showing a bathroom before and after the fan effectively removes steam and humidity.
폭발 view of the energy-efficient and quiet DC motor, highlighting its design for ultra-quiet operation at 1.5 sones.
주요 특징:
- 고성능: Operates at 100 CFM (Cubic Feet Per Minute) for effective moisture and odor removal.
- 조용한 작동: Rated at 1.5 Sones for minimal noise disruption.
- 통합 LED 조명: Bright 1000lm LED light illuminates your bathroom.
- 3CCT Selectable Lighting: Choose between 3000K (soft white), 4000K (bright white), or 5000K (daylight) color temperatures.
- 나이트 라이트 기능 : Includes a 2200K nightlight for low-level illumination in the dark.
- 내구성 있는 구조: Equipped with high-quality components and a DC motor for long-lasting performance.
- 간편한 설치: Designed with a fast bracket for secure and straightforward installation between ceiling joists.
- 인증: FCC and ETL Listed for reliability and safety.
명세서
Detailed diagram showing the product dimensions, including the light cover size (10.1" x 10.1"), housing dimensions (7.68" x 7.55" x 6.42"), and recommended ceiling opening size (8.11" x 7.48").
An infographic summarizing key product specifications such as material, exhaust volume, sound level, power consumption, and color temperature options.
| 사양 | 값 |
|---|---|
| 모델명 | OL17001-3CCT |
| 기류 용량 | 100 퀴놀론 |
| 소음 수준 | 1.5 아들 |
| 왓tage | 25W (Fan) + 10W (Light) |
| 광 출력 | 1000루멘 |
| 색온도 | 3000K/4000K/5000K Selectable, 2200K Nightlight |
| 본체 크기 (길이 x 너비 x 높이) | 7.68인치 x 7.55인치 x 6.42인치 |
| Light Cover Size | 10.1인치 x 10.1인치 |
| 천장 개구부 크기 | 8.11인치 x 7.48인치 |
| 권tage | 120 볼트 |
| 전원 | AC |
| 설치 유형 | 플러시 마운트 |
| 인증 | FCC 및 ETL 인증 획득 |
설정 및 설치
Before beginning installation, ensure all necessary tools and materials are available. Always disconnect power at the circuit breaker before starting any electrical work.
도구 및 재료 (포함되지 않음):
- 드라이버(십자 드라이버 및 일자 드라이버)
- 전선 스트리퍼
- 송곳
- 줄자
- 유틸리티 나이프 또는 건식벽체 톱
- Duct Tape or Clamps
- 보안경 및 장갑
설치 단계:
- 오프닝을 준비하세요: Ensure the ceiling opening is 8.11" x 7.48". If replacing an existing fan, remove the old unit.
- 하우징 장착: The fan comes with a fast bracket for secure installation. Mount the bathroom fan light combo between ceiling joists using the fast bracket, or nail/screw it directly to the joist. The housing dimensions are 7.68" x 7.55" x 6.42".
- 덕트 연결: Connect the appropriate ductwork (not included) to the fan's exhaust port. Ensure the duct does not bend into the opening to block the damper. Secure with duct tape or clamps to prevent air leaks.
- 배선: Follow the wiring diagrams provided below. Ensure all connections are secure and comply with local electrical codes. This unit requires a 120V AC power source.
- 라이트 커버 설치: Once wiring is complete and tested, attach the light cover (10.1'' x 10.1'') to the fan housing.
Detailed wiring diagrams for the OREiN bathroom fan, showing configurations for a single switch controlling both fan and light, and separate switches for fan and light. Includes a warning about duct obstruction.
작동 지침
Your OREiN Bathroom Exhaust Fan with Light is designed for simple operation. The fan and light functions are typically controlled by wall switches (purchased separately).
팬 작동 :
- Turn on the wall switch connected to the fan to activate the exhaust fan.
- The fan operates at 100 CFM to effectively remove moisture and odors from the bathroom.
- Note: The fan may take a few seconds to start up. This slow start mechanism is designed to protect the DC motor and extend its lifespan.
Light Operation (3CCT Selectable & Nightlight):
Visual representation of the three selectable color temperatures: 5000K (daylight), 4000K (bright white), and 3000K (soft white).
An illustration detailing the 3CCT (3000K/4000K/5000K) and nightlight (2200K) features, including the wattage 및 루멘 출력.
- Selecting Color Temperature (CCT): Before installation, locate the toggle switch on the back of the bathroom fan housing. Slide this switch to preset your desired LED color temperature: 3000K (soft white), 4000K (bright white), or 5000K (daylight). This setting is fixed once installed unless the unit is accessed again.
- Activating Nightlight: To switch to the 2200K nightlight mode, cycle the light switch (On-Off-On) within 2 seconds. This rapid cycling will toggle between the main light and the nightlight mode.
유지
Regular maintenance helps ensure optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
Cleaning the Light Cover:
- Carefully remove the light cover from the fan housing.
- 부드러운 천으로 덮개를 닦으세요.amp 천을 사용하세요. 필요하면 순한 비누를 사용하세요.
- 연마성 세제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- Ensure the cover is completely dry before reattaching.
Cleaning the Fan Housing and Motor:
- With the power off, gently vacuum or wipe away any dust or debris from the fan blades and interior of the housing.
- Do not spray water directly into the motor or electrical components.
- 전원을 다시 켜기 전에 모든 부품이 완전히 건조되었는지 확인하십시오.
문제 해결
If you experience issues with your OREiN Bathroom Exhaust Fan with Light, refer to the following common problems and solutions. If the problem persists, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 켜지지 않습니다. | 장치에 전원이 들어오지 않습니다. 배선 연결이 느슨합니다. 벽 스위치에 결함이 있습니다. | 차단기를 확인하고 전원이 켜져 있는지 확인하십시오. 모든 배선 연결이 단단히 고정되었는지 확인하십시오(전원을 끈 상태에서). 벽 스위치를 점검하거나 교체하십시오. |
| 조명이 켜지지 않습니다. | 장치에 전원이 들어오지 않습니다. 배선 연결이 느슨합니다. 벽 스위치에 결함이 있습니다. | 차단기를 확인하고 전원이 켜져 있는지 확인하십시오. 모든 배선 연결이 단단히 고정되었는지 확인하십시오(전원을 끈 상태에서). 벽 스위치를 점검하거나 교체하십시오. |
| 팬이 시끄럽습니다. | Ductwork obstruction or improper installation. 느슨한 장착. 팬 블레이드에 이물질이 있습니다. | Check ductwork for kinks or blockages. Ensure damper is not obstructed. Verify the fan housing is securely mounted to the joists. Disconnect power and clean fan blades. |
| Poor ventilation/humidity remains. | 덕트 막힘. Fan size inadequate for room. Air leaks in ductwork. | Check ductwork for blockages or kinks. Ensure the fan's CFM rating is appropriate for your bathroom size. Seal all duct connections with appropriate tape. |
| Light color temperature is incorrect. | CCT toggle switch set incorrectly. Accidental nightlight activation. | Ensure the CCT toggle switch on the fan housing is set to your desired temperature (requires accessing the unit). Cycle the light switch (On-Off-On within 2 seconds) to toggle between main light and nightlight mode. |
보증 정보
OREiN products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information or to initiate a warranty claim, please contact OREiN customer support using the information provided in the Support section.
고객 지원
For any questions, technical assistance, or support regarding your OREiN Bathroom Exhaust Fan with Light, please contact our customer service team.
- 전화 지원: 1(844)506-1530 (24-Hour Service)
- 온라인 지원: Contact us directly on Amazon or search for 'OREiN' online to find our official website and contact options.
- 보고: While returns can be processed through Amazon's logistics, we encourage you to contact us first for assistance with any issues before initiating a return.
Image showing a customer service representative and the 24-hour service phone number for support.
