1. 서론
This manual provides comprehensive instructions for the optimal use and maintenance of your Sovol Dual Color Silk PLA Filament. Designed for 3D printing, this 1.75mm co-extruded filament features a unique blend of rose and blue colors, offering a distinct aesthetic to your printed objects. Adhering to these guidelines will help ensure high-quality prints and extend the life of your filament.
주요 특징
- Dual Color Co-extrusion: Each section of the filament is composed of two distinct colors (Rose and Blue), allowing for dynamic color shifts in prints, even small ones, by rotating the print orientation.
- Silk Finish: Produces prints with an incredible pearlescent and glossy surface.
- High-Quality Raw Material: Made from imported PLA raw material, ensuring a charming gloss and consistent performance.
- Reliable Printing: Engineered to be jam-free, bubble-free, tangle-free, and to minimize layer lines. Offers excellent first-layer adhesion, reducing warpage, shrinkage, and curl주고받음.
- Precise Diameter: Features a stable diameter tolerance of +/- 0.03mm for smoother and more consistent 3D printing.
- 친환경 포장: Utilizes paper spools and cardboard boxes, with vacuum-sealed packaging and desiccant to maintain dryness.
Figure 1: Sovol Dual Color Silk PLA Filament spool and a samp인쇄.
Figure 2: Visual representation of the dual-color effect from different angles.
Figure 3: Key features of Sovol Silk PLA Filament.
2. 설정 및 준비
Proper preparation of your filament is crucial for successful 3D printing. Follow these steps before beginning your print:
- Unpack the Filament: Carefully remove the filament spool from its vacuum-sealed packaging. Ensure the desiccant packet is removed and disposed of properly.
- Inspect the Filament: Check the filament for any visible damage, kinks, or tangles. Ensure the end of the filament is securely tucked into the spool holes to prevent unwinding.
- Filament Drying: PLA filament can absorb moisture from the air, leading to print quality issues such as stringing, bubbles, and brittle prints. If the filament has been exposed to humid conditions or stored for an extended period, it is recommended to dry it using a dedicated filament dryer. Typical drying parameters for PLA are 40-50°C for 4-6 hours.
- Load into Printer: Load the filament into your 3D printer according to the manufacturer's instructions for your specific printer model. Ensure the filament feeds smoothly without resistance.
3. 작동 매개변수
The following are general recommended settings for printing with Sovol Dual Color Silk PLA Filament. These parameters may require slight adjustments based on your specific 3D printer model, nozzle type, and desired print quality.
권장 인쇄 설정
| 매개변수 | 추천값 |
|---|---|
| Print Temperature | 170~230도 |
| 노즐 온도 | 200~220도 |
| 뜨거운 침대 온도 | 45~60도 |
| 인쇄 속도 | 40-70mm/초 |
| 녹는점 | 175~185도 |
| Retraction (Bowden) | 4-6mm |
| Retraction (Direct Drive) | 0.5-1mm |
Note: Always perform a small test print or calibration cube when using new filament or adjusting settings to achieve optimal results.
Figure 4: Filament diameter accuracy for consistent printing.
4. 보관 및 유지 관리
Proper storage is essential to maintain the quality and performance of your filament. PLA is hygroscopic, meaning it absorbs moisture from the air, which can degrade its printing properties.
보관 권장 사항
- 건조하게 유지하세요: Always store unused filament in a dry, cool place. The original vacuum-sealed bag with the desiccant packet is ideal for this purpose.
- 밀폐 용기: If the original packaging is compromised, store the filament in an airtight container or bag with fresh desiccant.
- 직사광선을 피하세요: Prolonged exposure to UV light can degrade PLA filament. Store in a dark place or an opaque container.
- 온도 조절: Store at room temperature, away from extreme heat sources or cold.
Figure 5: Recommended packaging for filament storage.
5. 일반적인 문제 해결
Encountering issues during 3D printing can often be resolved by addressing common filament-related problems. Here are some typical issues and their solutions:
- 끈적거림/진물짐: This often indicates excessive moisture in the filament or incorrect retraction settings.
해결책: Dry the filament. Adjust retraction distance and speed in your slicer software. Lower nozzle temperature slightly. - Bubbles/Popping Sounds During Printing: A clear sign of moisture in the filament.
해결책: Immediately dry the filament using a filament dryer. - Poor Layer Adhesion: Can be caused by low printing temperature, too much cooling, or wet filament.
해결책: Increase nozzle temperature slightly. Reduce cooling fan speed for initial layers. Dry the filament. - Warping/Lifting from Print Bed: Often due to insufficient bed adhesion or uneven cooling.
해결책: Ensure print bed is clean and level. Increase bed temperature. Use an adhesive (e.g., glue stick) on the print surface. Reduce cooling fan speed for initial layers. - 막힘: Can result from dust on the filament, heat creep, or wet filament.
해결책: Ensure filament is clean. Check for proper hotend cooling. Dry the filament. - Brittle Filament: Filament that breaks easily, especially when bending, is usually saturated with moisture.
해결책: Thoroughly dry the filament.
6. 제품 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 소볼 |
| 모델 | Silk PLA - Rose Blue |
| 재료 유형 | 폴리락틱산(PLA) |
| 색상 | Rose Blue (Dual Color Co-extrusion) |
| 품목 직경 | 1.75mm (XNUMXmm) |
| 직경 공차 | +/- 0.03mm |
| 순중량 | 1KG(2.2파운드) |
| 제조업체 부품 번호 | SF00112 |
7. 보증 및 지원
For any questions, concerns, or technical support regarding your Sovol Dual Color Silk PLA Filament, please contact Sovol customer service. Refer to the product packaging or the official Sovol web최신 연락처 정보와 보증 세부 사항은 사이트에서 확인하세요.
