디지투스 DN-45004

Digitus DN-45004 Mobile Desktop Charging Cabinet User Manual

Model: DN-45004 | 10 USB-C Ports with UV Lamp

1. 서론

The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.

2. 안전 경고

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

4. 설정

  1. 짐 풀기: Carefully remove the charging cabinet from its packaging.
  2. 놓기: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
  3. 전원 연결: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
  4. 초기 전원 점검: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
내부 view of the Digitus DN-45004 charging cabinet showing the circuit breaker and internal wiring.
그림 4.1: 내부 view showing the circuit breaker. If the unit does not power on, check this component.

5. 사용 설명서

5.1 충전 장치

  1. 문 열어 라. Use the provided keys to unlock and open the front door of the cabinet.
  2. 삽입 장치: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
  3. Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
  4. 충전 상태 모니터링: Integrated LED indicators above each port show the charging status:
    • 빨간색: 현재 기기를 충전 중입니다.
    • 녹색: Charging process is complete, or no device is connected.
  5. 닫기 및 잠금: Once devices are connected, close and lock the front door for security.
앞쪽 view of the Digitus DN-45004 charging cabinet with labels for LED charging indicator, UV-C lighting switch, and USB-C charging port.
그림 5.1: 이상view of the charging cabinet features, including LED indicators and USB-C ports.
내부 view of the Digitus DN-45004 charging cabinet with multiple tablets connected to USB-C cables and charging.
Figure 5.2: Devices being charged inside the cabinet.

5.2 UV-C Lamp 작업

The integrated UV-C lamps provide a sterile environment for your devices.

  1. Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
  2. Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp 활성화되어 있습니다.
  3. Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
내부 view of the Digitus DN-45004 charging cabinet with the UV-C lamp illuminated, showing a blue glow.
Figure 5.3: Interior with UV-C light active.
클로즈업 view UV-C의 lamp installed inside the Digitus DN-45004 charging cabinet.
Figure 5.4: Close-up of the UV-C lamp.

5.3 냉각 시스템

The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.

6. 유지관리

7. 문제 해결

문제가능한 원인해결책
캐비닛에 전원이 켜지지 않습니다.Power cable not connected, power outlet issue, or internal circuit breaker tripped.Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup).
기기가 충전되지 않습니다.Device not properly connected, faulty USB-C cable, or device issue.Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging).
UVC lamp 켜지지 않습니다.UV-C switch off, lamp failure, or door not fully closed.Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp 교체가 필요할 수도 있습니다.
Laptops do not fit in the slots.The cabinet is designed for smaller portable devices.This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications.

8. 사양

특징세부 사항
상표디지 터스
모델 번호DN-45004
색상검정색(RAL 9005)
재료합금강
치수(높이 x 너비 x 깊이)345 x 360 x 370mm
Internal Shelf Depth294mm (XNUMXmm)
USB-C 충전 포트10
USB-C Output per Port18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A)
최대 USB-C 출력180와트
전원 입력C19; 110 / 220 VAC, 50/60 Hz, 16 A
총 전력 출력3500와트
냉각Integrated fan, automatic activation at >40°C
보안Steel front door with 3-point lock
특별 기능UVC lamps for hygiene, LED charging indicators
호환 장치스마트폰, 태블릿

9. 보증 및 지원

Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official web자세한 보증 약관은 웹사이트 또는 구매처에서 확인하십시오.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's web사이트 또는 제품 포장.

For more information about DIGITUS solutions, visit: Assmann Solutions