Sygonix SY-5231014 지문/RFID 출입 통제 시스템

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-5231014 Fingerprint/RFID Access System. This advanced access control unit features a vandal-proof metal housing, an illuminated keypad, and supports multiple access methods including fingerprint, RFID card, and PIN codes. It is designed for recessed installation and offers robust security with an IP55 rating, making it suitable for various indoor and outdoor applications. The system can manage up to 1000 users, including 10 designated visitors.

2. 안전 지침

설치 및 작동 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기기 손상이 발생할 수 있습니다.

• 전기 안전: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any wiring work.
• 전원 공급 장치: Use only a compatible 12V/DC or 18V/DC power supply. Incorrect voltag장치가 손상될 수 있습니다.
• 환경 조건: The unit has an IP55 rating, indicating protection against dust ingress and low-pressure water jets. Avoid direct exposure to heavy rain, submersion, or extreme temperatures.
• 기물 파손 방지: While designed with a vandal-proof metal casing, extreme force can still cause damage.
• 유지: 직접 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.

3. 패키지 내용

상자를 조심스럽게 개봉하여 아래 나열된 모든 품목이 있는지, 손상되지 않았는지 확인하십시오. 누락되거나 손상된 품목이 있는 경우 즉시 판매점에 문의하십시오.

• Sygonix SY-5231014 Access System Unit
• Plastic Mounting Box (for recessed installation)
• 장착 나사 및 플러그
• 30 cm Connection Cable for Access Control
• 다이오드
• 육각 렌치 (앨런 렌치)
• 사용 설명서 (본 문서)

4. 설정 및 설치

The Sygonix SY-5231014 is designed for recessed installation. Proper installation is crucial for optimal performance and security.

4.1 장치 장착

1. 오프닝을 준비하세요: Create an appropriate opening in the wall or mounting surface to accommodate the plastic mounting box. Ensure sufficient depth for the unit and wiring.
2. Install Mounting Box: Secure the plastic mounting box into the prepared opening using the provided screws and plugs. Ensure it is flush with the surface.
3. 배선 연결: Refer to the wiring diagram (not provided in this text, refer to the full product manual for detailed diagrams) for connecting the power supply (12V/DC or 18V/DC), electric lock, and Wiegand interface if applicable. The included 30 cm cable facilitates these connections. Ensure all connections are secure and insulated.
4. Insert Diode: If connecting to an inductive load (e.g., an electric strike), install the provided diode across the lock terminals to protect the access controller from back-EMF.
5. Secure Main Unit: Carefully insert the main access control unit into the mounting box. Secure it using the provided screws, typically located on the front panel.

5. 사용 설명서

The Sygonix SY-5231014 offers various methods for granting access and managing users.

5.1 사용자 관리

The system supports up to 1000 users, comprising 990 general users and 10 visitor users. User access can be granted via PIN, RFID card, or fingerprint.

• 사용자 추가: Access the programming mode (refer to the full manual for specific programming codes and sequences). Select the option to add a new user. Follow the prompts to register a PIN, scan an RFID card, or enroll a fingerprint.
• 사용자 삭제: In programming mode, select the option to delete a user. You may need to enter the user's ID or present their access credential to remove them from the system.
• 방문자 사용자: Visitor users typically have time-limited or single-use access. Configure these settings within the programming mode.

5.2 시스템 액세스

• PIN 접근: Enter your registered PIN code on the illuminated keypad, then press the '#' key.
• RFID 카드 접근: Present your registered RFID card to the designated reader area on the unit.
• 지문 접근: 등록된 손가락을 지문 센서에 단단히 올려놓으세요.

Upon successful authentication, the relay will activate according to its configured mode (impulse or toggle), granting access.

5.3 키패드 조명

The keypad features illumination for improved visibility in low-light conditions. This feature is automatically active or can be configured within the system settings.

5.4 Relay Modes

The programmable relay can operate in either impulse or toggle mode:

• 임펄스 모드: The relay activates for a short, configurable duration (e.g., 1-99 seconds) after successful authentication, typically used for electric strikes or momentary lock releases.
• 토글 모드: The relay changes its state (ON to OFF, or OFF to ON) with each successful authentication, suitable for applications requiring a persistent state change, such as holding a door open until another authentication.

6. 유지관리

Regular maintenance ensures the longevity and reliable operation of your access system.

• 청소: 부드러운 d를 사용하세요amp cloth to clean the keypad and fingerprint sensor. Avoid abrasive cleaners, solvents, or excessive moisture. Ensure the fingerprint sensor is free of dirt and smudges for accurate readings.
• 점검: Periodically check the unit for any signs of physical damage, loose connections, or wear.
• 소프트웨어 업데이트: 제조사 확인해보세요 web성능 향상이나 기능 추가를 위한 펌웨어 업데이트가 있는지 확인하려면 해당 사이트를 방문하십시오.

7. 문제 해결

If you encounter issues with your Sygonix SY-5231014, refer to the following common problems and solutions.

• 장치 전원이 켜지지 않음:
  가능한 원인: 전원 공급이 없거나 배선이 잘못되었습니다.
  해결책: Verify the power supply is connected and providing the correct voltage (12V/DC or 18V/DC). Check all wiring connections for continuity and proper polarity.
• Access Denied (PIN/Card/Fingerprint):
  가능한 원인: Incorrect PIN, unregistered card/fingerprint, or sensor obstruction.
  해결책: Ensure the correct PIN is entered. Verify the RFID card or fingerprint is registered in the system. Clean the fingerprint sensor thoroughly. Re-enroll fingerprint if issues persist.
• 키패드가 응답하지 않음:
  가능한 원인: System freeze or internal fault.
  해결책: Disconnect power to the unit for 30 seconds, then reconnect to perform a soft reset. If the issue persists, contact technical support.
• 문이 열리지 않음:
  가능한 원인: Lock malfunction, incorrect relay settings, or wiring issue.
  해결책: Check the electric lock for proper function. Verify the relay mode (impulse/toggle) and duration settings. Inspect wiring between the access unit and the lock.
• 조명이 작동하지 않습니다:
  가능한 원인: Feature disabled or internal fault.
  해결책: Check system settings to ensure keypad illumination is enabled. If enabled and still not working, contact technical support.

8. 사양

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Sygonix web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.