AMANSON H9 Mid-Tower Gaming PC Case

1. 서론

Thank you for choosing the AMANSON H9 Mid-Tower Gaming PC Case. This case is designed to provide optimal cooling performance and a stunning visual experience for your high-performance computing setup. Featuring panoramic tempered glass panels and nine pre-installed PWM ARGB fans, the H9 offers excellent airflow and customizable lighting. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new PC case.

2. 안전 정보

Please read and understand all safety instructions before installing or operating the PC case to prevent injury or damage to components.

• 설치, 유지보수 또는 청소를 하기 전에 항상 벽면 콘센트에서 전원 공급 장치를 분리하십시오.
• 강화 유리 패널은 조심스럽게 다루십시오. 강화 유리 패널은 깨지기 쉬우므로 떨어뜨리거나 충격을 주면 깨질 수 있습니다.
• Be aware of sharp edges inside the case during installation. Wear protective gloves if necessary.
• 민감한 전자 부품의 정전기 방전(ESD) 손상을 방지하기 위해 적절한 접지를 확보하십시오.
• Do not block ventilation openings. Proper airflow is crucial for component cooling.
• 케이스를 액체나 과도한 습기로부터 멀리하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• AMANSON H9 Mid-Tower Gaming PC Case (Model H06)
• 9 x Pre-installed PWM ARGB Fans
• 부속품 상자 (나사, 케이블 타이, 스탠드오프 등)
• 사용 설명서 (본 문서)

4. 특징

• Pre-installed 9 PWM ARGB Fans: Equipped with nine high-performance fans for superior cooling and vibrant lighting.
• Synchronized RGB Lighting: Fans can be controlled via a +5V ARGB motherboard header for synchronized lighting effects, eliminating the need for an external controller.
• 효율적인 케이블 관리: 로 디자인됨 ample space behind the motherboard tray and simplified fan connections to reduce cable clutter.
• 이중 강화 유리 패널: Two 4mm thick tempered glass panels provide a clear view 내부 구성 요소 및 RGB 조명.
• 편리한 I/O 패널: Front panel includes 1x Type-C Port, 1x USB 3.0 Port, 2x USB 2.0 Ports, 1x HD Audio Jack, Power Button, Reset Button, and LED Switch Button.
• 주목할 만한 확장: Supports ATX, Micro-ATX, and Mini-ITX motherboards. Accommodates 360mm radiators, CPU coolers up to 170mm, and GPUs up to 400mm. Features 7+3 expansion slots and dedicated HDD/SSD brackets.

5. 사양

참고 : 사양은 예고없이 변경 될 수 있습니다.

6. 설정 가이드

Follow these steps for proper installation of your PC components:

6.1 사건 준비

1. Carefully remove the tempered glass side panels. Most panels are secured with thumbscrews or a hinge mechanism.
2. Identify the internal layout. The AMANSON H9 features a dual-chamber design for optimized component separation and cable management.
3. 팬 방향 설정: Some users report that pre-installed fans may be oriented for exhaust. For optimal cooling, ensure intake fans (typically front/side/bottom) pull cool air into the case and exhaust fans (typically top/rear) push hot air out. Adjust fan orientation as needed by unscrewing and flipping them.

Figure 6.1: Quick access to interior components for simplified maintenance and installation.

6.2 마더 보드 설치

1. Install the necessary motherboard standoffs if they are not pre-installed for your motherboard size (ATX, Micro-ATX, Mini-ITX).
2. 나사 구멍을 맞춰서 마더보드를 스탠드오프에 조심스럽게 올려놓습니다.
3. 제공된 나사로 마더보드를 고정합니다.

6.3 전원 공급 장치(PSU) 설치

1. Mount the PSU in its designated compartment, typically at the rear bottom of the case.
2. 케이스 뒷면에서 나사로 PSU를 고정합니다.
3. Route the necessary power cables through the cable management cutouts to the main compartment.

Figure 6.2: Optimized power supply ventilation design ensures proper airflow for the PSU.

6.4 저장 드라이브 설치(SSD/HDD)

The case supports 2.5-inch SSDs and 3.5-inch HDDs. Locate the dedicated mounting brackets or trays.

1. Attach your SSDs or HDDs to the appropriate trays/mounts using the provided screws.
2. Slide or secure the trays back into their positions.

Figure 6.3: The case provides dedicated mounts for up to four drives (2.5-inch SSDs and 3.5-inch HDDs).

6.5 그래픽 카드(GPU) 설치

1. 케이스 뒷면에서 필요한 PCI-E 슬롯 커버를 제거합니다.
2. 그래픽 카드를 마더보드의 PCI-E 슬롯에 장착하십시오.
3. Secure the graphics card with screws. The case also supports vertical GPU mounting (riser cable not included).

6.6 Connecting Front I/O Cables

Connect the front panel cables (USB, Audio, Power, Reset, LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Figure 6.4: The multi-function I/O panel provides convenient access to essential ports and controls.

6.7 팬 및 라디에이터 지원

The AMANSON H9 offers extensive fan and radiator support for various cooling configurations.

Figure 6.5: Wide compatibility for fan and radiator configurations, including up to 360mm radiators.

6.8 케이블 관리

Utilize the space behind the motherboard tray and the pre-routed fan cables for clean cable management. This improves airflow and aesthetics.

Figure 6.6: The daisy chain design for the 9 ARGB fans simplifies cable connections, requiring only two advanced connections.

7. 사용 설명서

7.1 전원 켜기/끄기

Press the Power Button on the front I/O panel to turn your system on or off. A short press typically initiates power on, while a longer press (usually 4-5 seconds) will force a shutdown.

7.2 ARGB 팬 컨트롤

기본 설치된 ARGB 팬은 두 가지 방식으로 제어할 수 있습니다.

• 마더보드 동기화: If your motherboard has a +5V ARGB header, connect the fan controller to it. You can then control the fan lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).
• LED 스위치 버튼: If not connected to a motherboard header, or if you prefer manual control, use the LED Switch Button on the front I/O panel to cycle through various pre-set lighting modes. Pressing the button twice may toggle between motherboard and hub control, depending on the specific fan hub.

8. 유지관리

정기적인 유지관리는 PC 구성 요소의 최적의 성능과 수명을 보장하는 데 도움이 됩니다.

• 먼지 필터: The AMANSON H9 is equipped with magnetic dust filters on the top and bottom. Regularly remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and affect cooling efficiency.

Figure 8.1: Magnetic dust filters provide superior protection and are easy to clean.

• 일반 청소: Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels. For stubborn smudges on glass, a glass cleaner can be used, applied to the cloth first, not directly to the glass.
• 내부 청소: 주기적으로 압축 공기를 사용하여 내부 부품과 팬 날개의 먼지를 제거하십시오. 청소하기 전에 시스템 전원을 끄고 플러그를 뽑으십시오.

9. 문제 해결

If you encounter issues with your AMANSON H9 PC case, refer to the following common problems and solutions:

• 시스템 전원이 켜지지 않음:
  • 24핀 ATX, 8핀 CPU, GPU 전원 케이블을 포함한 모든 전원 연결을 확인하세요.
  • PSU 스위치가 'ON' 위치에 있는지 확인하세요.
  • 전면 패널 전원 스위치 케이블이 마더보드 헤더에 올바르게 연결되어 있는지 확인하세요.
• Fans Not Spinning or Lighting Up:
  • Check fan power connections to the fan hub or motherboard.
  • Ensure ARGB cables are securely connected to the +5V ARGB header on the motherboard or the fan hub.
  • 메인보드 소프트웨어를 사용하는 경우, 해당 소프트웨어가 올바르게 설치 및 구성되었는지 확인하십시오.
  • Try pressing the LED Switch Button on the front I/O panel to cycle through modes or activate manual control.
• 공기 흐름 불량/고온:
  • Verify that all fans are oriented correctly (intake vs. exhaust).
  • 먼지 필터와 내부 부품을 정기적으로 청소하십시오.
  • 케이블이 공기 흐름을 방해하지 않는지 확인하십시오.
• USB 포트가 작동하지 않음:
  • Check that the front panel USB cables (USB 3.0, USB 2.0, Type-C) are securely connected to the corresponding headers on your motherboard.
  • USB 포트는 주로 데이터 전송을 위한 것이며 전원 충전에는 권장되지 않습니다. 대부분의 마더보드 USB 포트는 최대 볼륨을 지원하기 때문입니다.tage는 5V입니다.

10. 보증 및 지원

AMANSON products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official AMANSON web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For further assistance, you may contact AMANSON customer support through their official channels.