소개
The RAINPOINT Sprinkler Timer 2 Outlet is designed to automate your garden and lawn watering needs. This V2 Metal model features a durable brass inlet and offers extensive programming options for two independent watering zones. With its user-friendly interface, you can easily customize watering schedules, utilize manual modes, and benefit from a low battery alert system to prevent water leakage.
설정
1. 패키지 내용
- RAINPOINT Sprinkler Timer 2 Outlet (Metal V2)
- 사용자 설명서
- PTFE Tape and Gasket (for secure connections)
2. 배터리 설치
Locate the battery compartment on the back of the timer. Open the cover and insert two AA alkaline batteries (not included), ensuring correct polarity. Close the battery cover securely to maintain the waterproof seal.
이미지: 후면 view of the timer, indicating the battery compartment.
3. Attaching the Timer to Faucet
Thread the brass inlet of the timer onto your outdoor faucet. Hand-tighten until secure. Use the provided PTFE tape on the faucet threads for a leak-proof connection. Ensure the timer is vertically aligned for optimal performance.
Image: The sprinkler timer connected to an outdoor faucet, highlighting the brass inlet.
Connect your garden hoses or drip irrigation lines to the two outlets at the bottom of the timer. Each outlet can be independently controlled.
이미지: 앞면 view of the RAINPOINT Sprinkler Timer showing the two hose outlets.
Video: Water Timer 2 Zone with Brass Inlet
Video Description: This video demonstrates the physical installation of the RAINPOINT Sprinkler Timer, highlighting its two zones and brass inlet.
작동 지침
1. 시계 설정
Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to adjust the current time. Press 'OK' to confirm and move to the next setting.
2. 자동 급수 프로그래밍
The timer supports up to 38 programs across its two zones. Each zone (Zone 1 and Zone 2) can have its own customized watering frequency, start time, and duration.
- 시작 시간 설정: Turn the dial to 'START TIME'. Select Zone 1 or Zone 2 using the 'ZONE' button. Use '+' and '-' to set the desired start time for watering. Press 'OK'.
- 기간 설정: Turn the dial to 'HOW LONG'. Select the zone. Use '+' and '-' to set the watering duration from 1 minute to 3 hours 59 minutes. Press 'OK'.
- 빈도 설정: Turn the dial to 'HOW OFTEN'. Select the zone. Use '+' and '-' to set the frequency (e.g., every 1-12 hours, or every 1-7 days). Press 'OK'.
Image: Illustration of the dual-zone technology with separate cycle and interval modes.
Image: The timer's display showing options for setting watering frequency in hours or days.
3. 수동 급수 모드
The timer offers three separate manual/auto modes: Zone 1, Zone 2, or Both Zones. To activate manual watering, turn the dial to 'ON'. Press and hold the 'OK/MANUAL' button until 'MANUAL' appears on the display. Use the 'ZONE' button to select the desired zone(s). The manual watering time can be set from 1 minute to 8 hours.
Image: A user demonstrating manual watering with the timer, showing options for garden manual watering and lawn automatic watering.
4. 비 지연 기능
To temporarily pause watering due to rain, turn the dial to 'ON'. Press the 'DELAY +' button. Each press will increase the delay by 24 hours, up to 72 hours. The timer will resume its programmed schedule after the delay period ends.
Image: The timer displaying a low power alert, with the rain delay function highlighted.
Video: Brass Water Timer 2 Outlets
영상 설명: 이 영상은 간략한 개요를 제공합니다.view of the RAINPOINT 2-outlet water timer, demonstrating its programming dial and display.
유지
1. 배터리 부족 경고
When the battery level drops below 5%, a low-battery alert will appear on the display. The valve will automatically shut off to prevent water leakage. Replace batteries promptly to ensure continuous operation.
2. 필터 청소
Periodically check the filter screen located in the brass inlet for debris. Remove the timer from the faucet, carefully pull out the filter, rinse it under running water, and reinsert it. This helps maintain optimal water flow and prevents clogging.
3. 동절기 준비
Before the first frost, disconnect the timer from the faucet and hoses. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location to prevent damage from freezing temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물의 흐름이 없습니다 | Low battery; clogged filter; faucet off; incorrect programming. | Replace batteries; clean filter; open faucet; check programming. |
| 물 누출 | Loose connection; damaged gasket/tape; cracked housing. | Tighten connections; replace gasket/tape; contact support if damaged. |
| 잘못된 타이밍 | Clock not set; programming error. | Set clock correctly; re-program watering schedule. |
| 디스플레이가 작동하지 않음 | Dead batteries; unit malfunction. | Replace batteries; contact customer support. |
For further assistance, please refer to the detailed User Manual PDF or contact RAINPOINT customer support.
명세서
- 모델 번호: TCITV205NH-V2-C
- 재료: 금속
- 색상: 청회색
- 제품 크기: 5.4인치 깊이 x 3.2인치 너비 x 5.4인치 높이
- 품목 무게: 1.17파운드(0.53킬로그램)
- 설정 수: 38개 프로그램
- 수동 물주기 시간: 1분부터 8시간까지
- Automatic Watering Time: 1분부터 4시간까지
- 주파수 옵션: Every 1-12 hours, or every 1-7 days
- 비 와서 연기 됨: 24/48/72 시간
보증 및 지원
For detailed warranty information and customer support, please refer to the official RAINPOINT resources.
- 사용자 가이드(PDF): 사용자 가이드 다운로드
- 사용자 매뉴얼(PDF): 사용자 설명서 다운로드
- Visit the RAINPOINT Store: RAINPOINT Official Store
