HYCHIKA 3.6V 무선 전동 충전식 스크루드라이버 드릴 세트 사용 설명서

1. 서론

This user manual provides essential information for the safe and efficient operation of your HYCHIKA 3.6V Cordless Electric Rechargeable Screwdriver Drill Set. Please read this manual thoroughly before first use and keep it for future reference.

The HYCHIKA 3.6V Cordless Electric Screwdriver is designed for various screwing and light drilling tasks around the home. It features a maximum torque of 6 N-m, a 6.35 mm quick-change chuck, and a versatile design that allows for both pistol and straight grip configurations.

2. 안전 지침

화재, 감전, 신체 상해의 위험을 줄이려면 전기 도구를 사용할 때 항상 기본적인 안전 예방 조치를 준수하세요.

• 작업 영역 안전: 작업 공간을 깨끗하고 밝게 유지하세요. 어수선하거나 어두운 곳은 사고의 위험이 있습니다. 가연성 액체, 가스 또는 먼지가 있는 곳 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
• 전기 안전: 배관, 라디에이터, 가스레인지, 냉장고 등 접지된 표면에 신체가 직접 닿지 않도록 하십시오. 전동 공구를 비나 습기에 노출시키지 마십시오.
• 개인 안전: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry.
• 도구 사용 및 관리: 전동 공구에 무리한 힘을 가하지 마십시오. 사용 용도에 맞는 전동 공구를 사용하십시오. 조정, 액세서리 교체 또는 전동 공구 보관 시에는 전원 플러그를 뽑거나 배터리 팩을 제거하십시오.
• 배터리 팩 사용 및 관리: 제조사에서 지정한 충전기로만 충전하십시오. 다른 전동 공구와 함께 배터리 팩을 사용하지 마십시오. 배터리 팩을 사용하지 않을 때는 다른 금속 물체와 멀리 떨어뜨려 보관하십시오.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요. 품목이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

• 1 x HYCHIKA 3.6V Cordless Screwdriver
• 19는 드라이버 비트를 X
• 1 x 확장 바
• 1 x 충전 어댑터
• 1 x 사용자 설명서

Figure 3.1: Contents of the HYCHIKA 3.6V Cordless Screwdriver package, including the screwdriver, various bits, and charging adapter.

4. 제품 특징 및 구성품

Familiarize yourself with the different parts of your cordless screwdriver.

Figure 4.1: Key components of the screwdriver, including the magnetic chuck, PUSH button, front LED light, On/Off switch, LED charger indicator, 3.5mm charger port, and forward & reverse button.

• Magnetic Chuck: 1/4 inch (6.35mm) quick-change chuck for easy bit installation and removal.
• 전면 LED 조명: Illuminates the work area for improved visibility in dark environments.
• 켜기/끄기 스위치: Activates and deactivates the screwdriver.
• Forward & Reverse Button: Controls the rotation direction for screwing and unscrewing.
• LED Charger Indicator: Provides status of battery charging.
• 3.5mm Charger Port: Connection point for the charging adapter.
• 누름 단추: Used to adjust the grip configuration from pistol to straight.

5. 설정

5.1 배터리 충전

The screwdriver is powered by a 3.6V 2000 mAh Lithium-Ion battery. Before first use, fully charge the battery.

1. Connect the charging adapter to the 3.5mm charger port on the screwdriver.
2. 충전 어댑터를 일반 전기 콘센트에 꽂으세요.
3. The LED charger indicator will illuminate during charging. Once fully charged, the indicator may change color or turn off depending on the model.
4. 충전이 완료되면 충전기의 플러그를 뽑으세요.

Figure 5.1: The screwdriver connected to its charging adapter, indicating a full charge.

The screwdriver is designed to maintain full power output even when the battery is low, ensuring consistent performance until the battery is depleted.

5.2 드라이버 비트 설치

The screwdriver features a 1/4 inch (6.35mm) magnetic quick-change chuck for easy bit installation.

1. 작업에 적합한 드라이버 비트를 선택하십시오.
2. Insert the bit into the magnetic chuck until it is securely seated. The magnetic chuck will hold the bit firmly in place.
3. To remove a bit, simply pull it out of the chuck. Bits with grooves are designed for easier removal.

Figure 5.2: Visual guide for inserting a bit into the magnetic chuck and removing it.

6. 사용 설명서

6.1 Adjusting Grip Configuration

The screwdriver can be used in two grip configurations: pistol grip or straight grip, for enhanced versatility and comfort.

1. To change the grip, press and hold the "PUSH" button located at the top of the screwdriver.
2. While holding the button, rotate the handle ninety degrees to switch between pistol and straight configurations.
3. Release the "PUSH" button once the desired configuration is achieved. The handle will lock into place.

Figure 6.1: Demonstrates the process of transforming the screwdriver's grip by pressing the PUSH button and rotating the handle.

6.2 정방향 및 역방향 작동

The forward/reverse button controls the direction of rotation for screwing and unscrewing.

• To drive screws (forward rotation), push the forward/reverse button to the left (when view도구 뒤쪽에서 삽입).
• To remove screws (reverse rotation), push the forward/reverse button to the right.
• When the button is in the center position, the tool is locked, preventing accidental activation.

6.3 LED 작업등 사용

The built-in LED light automatically illuminates when the screwdriver is in operation, providing visibility in dimly lit areas.

Figure 6.2: The integrated LED light provides clear illumination for working in dark environments.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your screwdriver.

• 청소: 환기구를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 부드러운 천을 사용하십시오.amp 도구를 닦는 천 casing. 독한 화학 물질이나 연마성 세척제를 사용하지 마십시오.
• 비트 케어: Clean screwdriver bits after use. Store them in the provided case to prevent loss and damage.
• 배터리 보관: If storing the tool for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Recharge the battery every 3-6 months to maintain its health.
• 일반 검사: Periodically check for any loose screws, damaged cords, or worn parts. Do not use the tool if any damage is observed.

8. 문제 해결

This section addresses common issues you might encounter with your screwdriver.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

9. 사양

10. 보증 및 지원

Overstock offers lifetime after-sales service for this product. For any questions, concerns, or technical assistance, please contact our customer support team.

Please have your model number (c131a012-0da9-4306-aeab-b1d9ff5cd4b7) and purchase information ready when contacting support.