1. 서론
This user manual provides detailed instructions for the installation, operation, and maintenance of the Reyee 6-Port Gigabit Managed PoE Switch (Model: RG-ES206GC-P). This device is designed to provide reliable and high-speed network connectivity with Power over Ethernet (PoE) capabilities, simplifying network deployment for various applications. It is a durable and strong networking solution.
2. 제품 오버view
2.1 패키지 내용
- Reyee 6-Port Gigabit Managed PoE Switch (RG-ES206GC-P)
- 전원 어댑터
- 사용자 설명서
2.2. 신체적 설명
The Reyee RG-ES206GC-P switch features a robust metal casing designed for durability and efficient heat dissipation. The front panel includes all network ports and LED indicators for easy status monitoring.
Figure 2.1: Front Panel of the RG-ES206GC-P Switch
The front panel consists of four PoE-capable Gigabit Ethernet ports (1-4) and two Gigabit uplink ports (5-6). Each port has associated LED indicators to show link status and activity. A dedicated Status LED and LED mode switch are also present.
Figure 2.2: Rear Panel of the RG-ES206GC-P Switch
The rear panel includes the DC power input (DC--54V) and a reset button. An earthing point is also provided for proper grounding.
Figure 2.3: Bottom Panel of the RG-ES206GC-P Switch
The bottom panel features the product label with model, serial number, and technical information, along with mounting points for flexible installation.
2.3 LED 표시등
The switch features LED indicators to provide real-time status information. The LED mode switch allows toggling between two display modes:
| 지시자 | 상태 | 설명 |
|---|---|---|
| 상태 LED | On | 장치의 전원이 켜져 있고 정상적으로 작동하고 있습니다. |
| Port LEDs (Mode 1) | On | 링크가 설정되었습니다. |
| 섬광 | Activity (data transmission/reception). | |
| 녹색 | 1000/100/10 Mbps speed. | |
| Port LEDs (Mode 2) | 녹색 | PoE Good Supply (power is being supplied correctly). |
| 섬광 | PoE Over Load (power demand exceeds port capacity). |
3. 설정
3.1 시작하기 전에
- Ensure the installation environment is dry, well-ventilated, and within the recommended operating temperature range.
- Place the switch on a stable, flat surface or mount it securely using the provided mounting points.
- Verify that the power source meets the voltag요구 사항(110볼트 AC).
3.2 하드웨어 설치
- 전원 연결: Connect the provided power adapter to the DC--54V input port on the rear panel of the switch, then plug the adapter into a suitable power outlet. The Status LED should illuminate.
- 네트워크 장치 연결:
- For non-PoE devices (e.g., computers, routers), connect them to any of the 6 RJ45 ports using standard Ethernet cables.
- For PoE-powered devices (e.g., IP cameras, VoIP phones, wireless access points), connect them to ports 1-4. The switch will automatically detect and provide power.
- 연결 확인: Check the LED indicators for each connected port. A solid green light typically indicates a successful link, and flashing indicates data activity. For PoE ports, ensure the PoE Good Supply LED is green.
4. 사용 설명서
The Reyee RG-ES206GC-P is a managed PoE switch, offering advanced network management capabilities in addition to basic plug-and-play functionality. Once hardware installation is complete, the switch will begin forwarding network traffic.
4.1 기본 작업
- 전원 켜기/끄기: Simply connect or disconnect the power adapter. There is no separate power button.
- 데이터 전송: The switch automatically learns MAC addresses and forwards data frames to the correct destination ports at Gigabit speeds (1000 Mbps).
- PoE 기능: For devices connected to ports 1-4, the switch automatically detects PoE compatibility and supplies power according to IEEE 802.3af/at standards.
4.2 Network Configuration (Managed Features)
As a managed switch, the RG-ES206GC-P allows for advanced configuration and monitoring through a web-based management interface. For detailed instructions on accessing and configuring features such as VLANs, QoS, port mirroring, and PoE management, please refer to the comprehensive software user guide or the manufacturer's official support website. Typically, you will need to connect a computer to the switch and access its default IP address via a web 브라우저.
5. 유지관리
- 청소: Regularly clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris to prevent overheating.
- 통풍: Ensure adequate airflow around the switch. Do not block the ventilation holes on the sides of the device.
- 펌웨어 업데이트: Periodically check the RUIJIE official web펌웨어 업데이트 사이트입니다. 펌웨어를 최신 상태로 유지하면 최적의 성능, 보안 및 새로운 기능에 대한 액세스를 보장할 수 있습니다.
- 환경 조건: Operate the switch within its specified temperature and humidity ranges to ensure longevity and stable performance.
6. 문제 해결
This section provides solutions to common issues you might encounter with your Reyee RG-ES206GC-P switch.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power (Status LED off) | 전원 어댑터가 연결되지 않았거나 결함이 있습니다. 전원 콘센트 문제입니다. | 전원 어댑터가 스위치와 작동하는 콘센트에 제대로 연결되어 있는지 확인하십시오. 다른 기기를 사용하여 콘센트가 제대로 작동하는지 테스트하십시오. |
| No link on a port (Port LED off) | 이더넷 케이블에 오류가 있거나 연결이 끊어졌습니다. 연결된 장치가 꺼져 있거나 오류가 있습니다. | 케이블 양쪽 끝의 연결 상태를 확인하십시오. 다른 이더넷 케이블을 사용해 보십시오. 연결된 장치가 전원이 켜져 있고 정상적으로 작동하는지 확인하십시오. |
| PoE device not powering on (PoE LED off or flashing) | PoE device not compatible; cable issue; PoE budget exceeded; PoE over load. | Ensure the device is PoE compatible (IEEE 802.3af/at). Check the Ethernet cable. Reduce the number of high-power PoE devices or use a separate power source for some devices if the PoE budget is exceeded. Check PoE LED Mode 2 for 'PoE Over Load' status. |
| 네트워크 성능 문제 | Cable quality; network loop; high network traffic. | Use high-quality Ethernet cables (Cat5e or Cat6). Check for accidental network loops. If managed, monitor network traffic and consider QoS settings. |
| 접근할 수 없습니다 web 관리 인터페이스 | Incorrect IP address; network configuration issue on PC. | Ensure your PC's IP address is in the same subnet as the switch's default IP. Verify the switch's IP address. Try resetting the switch to factory defaults (refer to manufacturer's guide for procedure). |
7. 사양
The following table outlines the key technical specifications for the Reyee 6-Port Gigabit Managed PoE Switch (RG-ES206GC-P).
| 특징 | 사양 |
|---|---|
| 모델 | RG-ES206GC-P |
| 포트 | 6 x RJ45 Gigabit Ethernet (4 x PoE, 2 x Uplink) |
| 데이터 전송 속도 | 10/100/1000Mbps(기가비트) |
| 스위치 유형 | 관리형 PoE 스위치 |
| PoE 표준 | IEEE 802.3af / at |
| 권tage 입력 | 110볼트(AC) |
| 케이스 소재 | 금속 |
| 품목 무게 | 0.79킬로그램(1.74파운드) |
| 제품 크기(L x W x H) | 19.69 x 19.69 x 11.02 인치 |
| 호환 장치 | Desktop, PoE-powered devices (e.g., IP cameras, VoIP phones, APs) |
| 제조업체 | 루이지에 |
8. 보증 및 지원
RUIJIE products are designed for reliability and performance. For information regarding the warranty period and terms for your Reyee 6-Port Gigabit Managed PoE Switch, please refer to the warranty card included with your product or visit the official RUIJIE web대지.
For technical support, troubleshooting assistance beyond this manual, or to inquire about service, please contact RUIJIE customer support through their official channels. You can typically find contact information, FAQs, and additional resources on the manufacturer's web대지.
