Teka Duetto Plus 70 EX Cooktop and Hood Pack User Manual

1. 서론

Thank you for choosing the Teka Duetto Plus 70 EX Cooktop and Hood Pack. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and keep them for future reference.

1.1 안전 지침

• 해당 기기는 현지 규정에 따라 자격을 갖춘 기술자가 설치해야 합니다.
• Do not modify the appliance. Any modifications may void the warranty and create safety hazards.
• 작동 중에는 어린이가 제품 가까이에 두지 않도록 하십시오.
• 청소 또는 유지 관리 전에는 항상 제품을 전원 공급 장치에서 분리하십시오.
• Ensure adequate ventilation when using the gas cooktop.
• 기기 근처에 가연성 물질을 보관하지 마십시오.

1.2 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

• Teka Duetto Plus 70 EX Gas Cooktop
• Teka Recirculating Hood
• Carbon Filter (pre-installed or separate)
• 장착 하드웨어(나사, 브래킷)
• 사용 설명서 (본 문서)

이미지 1.1: 이상view of the Teka Duetto Plus 70 EX Cooktop and Hood Pack. This image displays the combined cooktop and recirculating hood unit, highlighting its design and primary components.

2. 설치 및 설정

Proper installation is crucial for the safe and efficient operation of your appliance. Refer to the detailed diagrams and instructions provided in the separate installation guide for specific measurements and procedures.

2.1 Cooktop Installation

1. 조리대 준비: Create an opening in the countertop according to the dimensions specified in the installation guide. Ensure sufficient clearance from walls and adjacent cabinets.
2. 가스 연결: Connect the cooktop to the gas supply using appropriate fittings and flexible hoses, ensuring all connections are sealed and leak-tested by a certified professional.
3. 전기 연결: Connect the cooktop to a grounded electrical outlet as per local electrical codes. This powers the automatic ignition.
4. Securing the Cooktop: Place the cooktop into the cutout and secure it using the provided clamps 또는 대괄호.

Note: A diagram illustrating the countertop cutout dimensions and gas/electrical connection points would typically be included here if available.

2.2 Hood Installation

1. 설치: Secure the hood to the wall or cabinet above the cooktop using the provided mounting hardware. Ensure it is level and at the recommended height above the cooking surface.
2. Recirculation Setup: As this is a recirculating hood, ensure the carbon filter is correctly installed. The filtered air will be discharged back into the kitchen through the vents on the hood.
3. 전기 연결: Connect the hood to a grounded electrical outlet.

Note: An illustration of the hood mounting points and carbon filter placement would typically be included here if available.

3. 운영

Familiarize yourself with the controls before operating the appliance.

3.1 조리대 작동

1. 점화: Push and turn the desired burner knob counter-clockwise to the maximum flame position. The automatic ignition will spark, lighting the gas. Hold the knob for a few seconds after ignition to allow the thermocouple to heat up.
2. 화염 조절: Once lit, adjust the flame size by turning the knob between the maximum and minimum flame settings. The triple flame burner provides efficient heat distribution.
3. 끄기: Turn the burner knob clockwise to the 'OFF' position. Ensure the flame is extinguished.

Note: A close-up image of the cooktop control knobs and burner layout would typically be included here if available.

3.2 Hood Operation

The hood features push-button controls for fan speed and lighting.

• 팬 속도: Press the fan speed buttons (usually marked 1, 2, 3, or Min, Med, Max) to select the desired extraction power.
• LED 조명: LED를 켜려면 조명 버튼을 누르세요.amps on or off. These provide illumination for your cooking area.

Note: An image detailing the hood's push-button control panel would typically be included here if available.

4. 유지관리 및 청소

정기적인 유지관리는 가전제품의 수명과 최적의 성능을 보장합니다.

4.1 조리대 청소

• 스테인레스 스틸 표면: 스테인리스 스틸 표면은 부드러운 천과 비연마성 스테인리스 스틸 세척제를 사용하여 결 방향으로 닦아주세요.
• Burners and Grates: Remove burner caps and grates. Wash them with warm soapy water. Ensure they are completely dry before reassembling.
• 점화 플러그: Keep the ignition plugs clean and free from food debris to ensure reliable automatic ignition.

4.2 Hood Cleaning and Filter Replacement

• 외부 표면: Clean the exterior of the hood with a soft cloth and mild detergent. Avoid abrasive cleaners.
• 그리스 필터: The metal grease filters should be cleaned regularly (e.g., monthly) by hand or in a dishwasher. Refer to the hood's specific instructions for removal and reinstallation.
• 탄소 필터: The carbon filter (for recirculation) cannot be washed and must be replaced periodically, typically every 3-6 months depending on usage. Consult the hood's specific instructions for replacement.

Note: An image demonstrating the removal and cleaning of grease filters and replacement of the carbon filter would typically be included here if available.

5. 문제 해결

고객 서비스에 문의하기 전에 다음 표를 참조하여 일반적인 문제와 해결 방법을 확인하세요.

6. 사양

Key technical specifications for the Teka Duetto Plus 70 EX Cooktop and Hood Pack:

• 모델 번호: PLUS-70EX
• 상표: 테카
• 색상: 블랑코(화이트)
• 재료: 스테인리스 스틸
• 치수(제품): 86cm(깊이) x 32cm(너비) x 61cm(높이)
• 무게(제품): 21kg
• 힘: 1000 watts (for hood/ignition)
• 권tage: 115 볼트
• 가열 요소: 2개 (버너)
• 연료 유형: Natural Gas (adaptable to LP gas by qualified technician)
• 버너 유형: Gas Burners (Triple Flame)
• 제어 유형: 단추

7. 보증 및 지원

Teka products are manufactured to high-quality standards and come with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered.

For technical assistance, spare parts, or warranty claims, please contact Teka customer support. Contact details can typically be found on the Teka official web사이트 또는 구매 문서에서 확인하세요.

보증 서비스를 받으려면 구매 증빙서(영수증이나 송장)가 필요하므로 보관하세요.