소개
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Bathroom Exhaust Fan with LED Light, Model OL17004. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image: OREiN Bathroom Exhaust Fan with LED Light, showcasing its design and adjustable color temperature options.
안전 정보
경고: 화재, 감전 또는 부상의 위험을 줄이려면 다음 사항을 준수하세요.
- 본 제품은 제조사가 의도한 방식으로만 설치하십시오. 궁금한 사항이 있으면 제조사에 문의하십시오.
- 점검이나 청소를 하기 전에 배전반에서 전원을 차단하고 전원 차단 장치를 잠가 전원이 실수로 켜지는 것을 방지하십시오. 전원 차단 장치를 잠글 수 없는 경우에는 눈에 잘 띄는 경고 장치(예: 경고 표지판)를 단단히 부착하십시오. tag, 서비스 패널로.
- 설치 작업 및 전기 배선은 내화성 건축 규정 및 표준을 포함하여 모든 해당 규정 및 표준에 따라 자격을 갖춘 사람이 수행해야 합니다.
- 역류를 방지하기 위해 연료 연소 장비의 연도(굴뚝)를 통해 가스를 적절하게 연소하고 배출하려면 충분한 공기가 필요합니다. NFPA(National Fire Protection Association), ASHRAE(American Society for Heating, Refrigeration and Air Conditioning Engineers) 및 지역 규정 당국에서 발행한 것과 같은 난방 장비 제조업체의 지침 및 안전 표준을 따르십시오.
- 벽이나 천장을 절단하거나 구멍을 뚫을 때 전기 배선이나 기타 숨겨진 공공 시설을 손상시키지 마십시오.
- 덕트형 팬은 항상 외부로 환기해야 합니다.
- This unit is not intended for use in kitchens.
- 솔리드 스테이트 속도 제어 장치와 함께 이 팬을 사용하지 마십시오.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- OREiN Bathroom Exhaust Fan Unit (Housing with Motor and Duct Connector)
- LED 라이트 커버
- 장착 브래킷
- Wire Connectors (Wago-style)
- 장착 나사
Image: Components included with the OREiN Bathroom Exhaust Fan.
명세서
| 특징 | 사양 |
|---|---|
| 상표 | 오레인 |
| 모델명 | OL17004 |
| 기류 용량 | 110 CFM(분당 입방 피트) |
| 소음 수준 | 2.0 아들 |
| 왓tage | 27 Watts (Total, Fan + Light) |
| 광 출력 | 1500루멘 |
| 색온도(CCT) | 3000K (Soft White), 4000K (Bright White), 5000K (Daylight) Selectable |
| 야간 조명 | 2200K |
| 권tage | 120 볼트 |
| 본체 크기 (길이 x 너비 x 높이) | 7.68인치 x 7.55인치 x 6.42인치 |
| Light Cover Size | 9.8인치 x 9.8인치 |
| 천장 개구부 크기 | 8.11인치 x 7.48인치 |
| Duct Connector Size | 4인치(둥근) |
| 인증 | ETL, FCC Listed |
Image: Product dimensions and required ceiling opening for installation.
설정 및 설치
필요한 도구: Screwdriver, Wire Strippers, Drill, Measuring Tape, Utility Knife, Safety Glasses, Gloves.
중요한: Ensure power is OFF at the circuit breaker before starting installation.
- 천장 개구부 준비: Create a ceiling opening of 8.11" x 7.48". Ensure there is sufficient space above the ceiling for the fan housing (7.68" x 7.55" x 6.42").
- 하우징 장착:
- Attach the mounting bracket to the ceiling joists. The bracket is designed for easy installation between joists.
- Slide the fan housing into the mounting bracket. Secure the housing to the bracket using the provided screws or by nailing/screwing directly to the joist if preferred.
- 덕트 연결: Connect a 4-inch round duct to the fan's duct connector. Ensure the duct is securely fastened and sealed to prevent air leakage. Vent the ductwork to the outdoors.
- 전기 배선:
- Route the electrical supply wires (120V AC) to the fan housing.
- Connect the fan's wires to the household wiring using the provided wire connectors. Follow the wiring diagram below.
- 적절한 접지를 확인하십시오.
- The fan and light can be wired to separate switches for independent control. The LED light wires cannot be connected to a dimmer switch.
- 라이트 커버 설치: Once wiring is complete and secured, attach the LED light cover to the fan housing. Ensure it clicks into place or is securely fastened according to the design.
Image: Electrical wiring diagram and installation dimensions.
작동 지침
팬 작동
The exhaust fan operates at 110 CFM to effectively remove moisture and odors from your bathroom. It features a low noise level of 2.0 sones for quiet performance.
- Turn on the dedicated fan switch to activate the exhaust fan.
- Turn off the fan switch to deactivate the fan.
Image: Installed fan highlighting key performance metrics.
LED 조명 작동
The integrated LED light offers adjustable color temperature and a nightlight function.
- 색온도(CCT) 조정:
The fan features a toggle switch on the back of the unit (accessible before final installation of the light cover) to select your desired color temperature: 3000K (Soft White), 4000K (Bright White), or 5000K (Daylight). Set this switch to your preferred CCT before installing the light cover.
Image: Demonstrates the three selectable color temperatures of the LED light.
- 야간 조명 모드:
The fan includes a 2200K nightlight feature. To activate or cycle through the nightlight mode, quickly turn the light switch OFF and then ON again within 2 seconds. This action will switch between the main light and the nightlight mode.
Image: The 2200K nightlight function in a bathroom setting.
유지
정기적인 유지관리를 통해 배기팬의 최적의 성능과 수명을 보장할 수 있습니다.
- Cleaning the Light Cover:
- Turn off power at the circuit breaker before cleaning.
- Carefully remove the light cover.
- Wipe the light cover with a soft, damp 천. 연마성 세척제는 사용하지 마십시오.
- Allow the cover to dry completely before reattaching.
- Cleaning the Fan Grille/Housing:
- With the light cover removed and power off, gently vacuum or wipe away any dust or debris from the fan grille and accessible parts of the housing.
- Do not spray water directly into the fan motor or electrical components.
- LED 광원 : The LED light source is integrated and designed for long life. It is not user-replaceable. If the LED light fails, contact customer support.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 작동하지 않습니다. | 전원 공급 안 됨; 배선 불량; 스위치 고장. | Check circuit breaker. Ensure all wire connections are secure. Test switch functionality. |
| 조명이 켜지지 않습니다. | No power supply; loose wiring; faulty switch; CCT toggle switch not set. | Check circuit breaker. Ensure all wire connections are secure. Test switch functionality. Verify the CCT toggle switch on the fan unit is set to a valid position (3000K, 4000K, or 5000K). |
| 팬이 시끄럽거나 진동이 지나치게 심합니다. | 장착 불량; 팬 날개에 이물질 끼임; 모터 문제. | Ensure fan housing is securely mounted. Turn off power and inspect fan blades for obstructions. If noise persists, contact customer support. |
| Poor ventilation/steam not clearing. | Blocked ductwork; improper duct installation; fan motor issue. | Check ductwork for kinks or blockages. Ensure duct is properly sealed and vented outdoors. Verify fan motor is running at full speed. |
| Light color temperature is incorrect or stuck. | CCT toggle switch not set correctly. | Turn off power, remove light cover, and adjust the CCT toggle switch on the fan unit to your desired setting. Reinstall cover and restore power. |
| Nightlight function not working. | Incorrect switching sequence. | Ensure you are cycling the light switch OFF and ON again within 2 seconds to activate the nightlight mode. |
보증 및 지원
For warranty information or technical assistance, please contact OREiN customer support. Refer to your purchase documentation for specific warranty terms and conditions.
연락처 정보:
- For support, please visit the OREiN store on Amazon: OREiN Amazon Store
- Alternatively, search for "OREiN" online to find official contact channels.
Additional resources, including a detailed Installation Manual and User Guide, may be available in PDF format:
