소개
This manual provides comprehensive instructions for the setup, operation, and maintenance of your MotionBlinds CM-12-BK 5-Channel Remote Control. This remote is designed for operating and programming MotionBlinds roller shade motors, offering convenient control over your window coverings.
Image: The MotionBlinds CM-12-BK 5-Channel Remote Control shown next to its product packaging, highlighting its sleek black design.
제품 특징
- 5채널 제어: Operate up to five individual blinds or groups of blinds independently.
- 인체공학적 디자인: 잡기 편하고 사용하기 쉽습니다.
- Wall Mounting Clip: Includes a clip for convenient wall storage.
- Optional Smart Home Connectivity: Compatible with Google Home and Amazon Alexa via the MotionBlinds Wi-Fi bridge (sold separately).
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- MotionBlinds CM-12-BK 5-Channel Remote Control
- 벽면 장착 클립
- 사용 설명서 (본 문서)
Image: The MotionBlinds CM-12-BK Remote Control, its packaging, and the included wall mounting clip.
설정 및 페어링
Follow these steps to set up your remote control and pair it with your MotionBlinds motors.
- 배터리 삽입: Open the battery compartment on the back of the remote and insert the required batteries (not included, typically AAA). Ensure correct polarity.
- Prepare Motor for Pairing: Refer to your MotionBlinds motor's specific instructions to put it into pairing mode. This usually involves pressing a button on the motor itself.
- 리모컨 페어링: While the motor is in pairing mode, press and hold the programming button on the remote control (often a small recessed button) until the motor responds (e.g., jogs slightly).
- Assign Channel: Use the channel selection buttons on the remote to assign the motor to a specific channel (1-5).
- 테스트 작업: Use the UP, DOWN, and STOP buttons to verify the motor responds correctly to the remote.
For detailed pairing instructions specific to your motor type, please consult the manual provided with your MotionBlinds motor.
리모콘 조작하기
The CM-12-BK remote control allows for intuitive operation of your MotionBlinds.
- 채널 선택: 사용하세요 CH+ 그리고 CH- buttons to cycle through channels 1-5 or select the all-channel mode. The active channel is indicated by the LED display.
- 위쪽 버튼 (⌃): 블라인드를 올리려면 누르세요.
- 아래 버튼(⌄): 블라인드를 내리려면 누르세요.
- STOP/Favorite Button (■): Press to stop the blind at any position. A long press can set or recall a favorite position (refer to motor manual for favorite position programming).
For advanced functions such as setting limits or favorite positions, please refer to the specific instructions for your MotionBlinds motor.
유지
리모컨의 수명과 최적의 성능을 보장하려면 다음 사항을 준수하십시오.
- 청소: 부드럽고 마른 천으로 리모컨을 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 배터리 교체: Replace batteries when the remote's indicator light dims or operation becomes inconsistent. Always use the recommended battery type.
- 저장: 리모컨은 직사광선과 극한의 온도를 피해 건조한 곳에 보관하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Remote does not control the blind. |
|
|
| Blind moves erratically or stops unexpectedly. |
|
|
명세서
| 모델 번호 | CM-12-BK |
| 상표 | MotionBlinds (Manufacturer: Coulisse) |
| 색상 | 검은색 |
| 지원되는 최대 장치 수 | 5개 채널 |
| 호환 장치 | MotionBlinds Smart Blinds, Amazon Alexa (via Wi-Fi bridge), Google Home (via Wi-Fi bridge) |
| 품목 무게 | 4 온스 |
| 패키지 크기 | 6 x 4 x 4 인치 |
| 특징 | 인체공학적 |
보증 및 지원
For warranty information and technical support, please contact Coulisse or MotionBlinds directly through their official web웹사이트 또는 고객 서비스 채널을 이용하세요. 구매 영수증을 구매 증빙 자료로 보관하세요.
추가 리소스 및 제품 정보는 공식을 방문하세요. 모션블라인드 web대지.
