1. 제품 오버view
The LOKITHOR J1000 is a powerful and compact 12V jump starter designed for emergency vehicle starting. It features advanced LiFePO4 battery technology, ensuring safety and extended lifespan. This device is capable of delivering 1000A starting current, suitable for gasoline engines up to 6.0L and diesel engines up to 3.0L. It also functions as a portable power bank with 60W two-way fast charging capabilities.
Image 1.1: The LOKITHOR J1000 Jump Starter in use, connected to a car battery. The display shows battery voltag전자 및 상태.
주요 특징:
- 고성능: 1000A starting current for up to 6.0L gas and 3.0L diesel engines.
- LiFePO4 배터리: Utilizes Lithium Iron Phosphate technology for enhanced safety, stability, and a longer cycle life (2000 cycles).
- 스마트 기술: Integrated BMS (Battery Management System) provides 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
- 빠른 충전: 60W two-way fast charging allows a full charge in approximately 25 minutes, and a 3-minute charge can provide enough power for a jump start.
- 내구성 있는 디자인: IP65 water-resistant and 94V0 flame retardant enclosure for robust performance in various conditions.
- 긴 대기 시간 : Maintains charge for up to 24 months on a single full charge.
2. 상자 안에 무엇이 들어있나요?
패키지를 열 때 다음 품목이 모두 들어 있는지 확인하세요.
- LOKITHOR J1000 Portable Lithium Car Battery Jump Starter Unit
- LO-CLAMP-Pro (Smart Jumper Cables)
- 12V 차량용 어댑터
- 사용자 설명서
- USB-C to USB-C 케이블
- USB-A to USB-C 케이블
Image 2.1: A visual representation of all items included in the LOKITHOR J1000 Jump Starter package, including the main unit, jumper cables, cables, and adapter.
3. 설정 및 충전
3.1 초기 충전
Before first use, fully charge the LOKITHOR J1000. The device comes with a partial charge, but a full charge ensures optimal performance and readiness for emergencies.
3.2 Charging the J1000
The J1000 supports 60W two-way fast charging via its USB-C port. Use the provided USB-C to USB-C cable and a compatible 60W (or higher) USB-C power adapter (not included) for the fastest charging. Alternatively, you can use the 12V car adapter.
- Connect one end of the USB-C cable to the J1000's USB-C input/output port.
- Connect the other end of the USB-C cable to a suitable power source (e.g., wall adapter, car adapter).
- The display will indicate charging status. A full charge typically takes about 25 minutes with a 60W charger.
Image 3.1: The LOKITHOR J1000 Jump Starter connected via its USB-C port for 60W fast charging, demonstrating its power bank capabilities for other devices.
4. 사용 설명서
4.1 Jump Starting a Vehicle (Normal Start)
Use this method when the vehicle battery voltage는 8V 이상입니다.
- Ensure the J1000 is sufficiently charged.
- Connect the LO-CLAMP-Pro jumper cable harness into the jump starter's port.
- 빨간색 CL을 붙입니다.amp 차량 배터리의 양극(+) 단자에 연결하십시오.
- 검은색 CL을 부착합니다.amp 차량 배터리의 음극(-) 단자에 연결하세요.
- Observe the J1000's display. Wait for the green light indicator to come on and start flashing, indicating it's ready to start.
- 차량을 시동하세요.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the J1000.
4.2 Jump Starting a Vehicle (Force Start)
Use this method when the vehicle battery voltage is below 8V or if the normal start fails.
- Ensure the J1000 is sufficiently charged.
- Connect the LO-CLAMP-Pro jumper cable harness into the jump starter's port.
- 빨간색 CL을 붙입니다.amp 차량 배터리의 양극(+) 단자에 연결하십시오.
- 검은색 CL을 부착합니다.amp 차량 배터리의 음극(-) 단자에 연결하세요.
- Long press the Power Button and the LED Button simultaneously on the J1000. The display will show a specific indicator for force start mode.
- 30초 이내에 차량 시동을 걸십시오.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the J1000.
Image 4.1: A visual guide illustrating the three steps for both Normal Start (for batteries above 8V) and Force Start (for batteries below 8V) using the LOKITHOR J1000.
4.3 파워뱅크로 사용하기
The J1000 can charge various electronic devices via its USB-A (18W output) and USB-C (60W two-way) ports.
- Connect your device to the appropriate USB-A or USB-C port on the J1000 using a compatible charging cable.
- The J1000 will automatically begin charging your device.
4.4 LED 손전등 기능
The J1000 includes an integrated LED flashlight with multiple modes.
- Press the LED button once to turn on the flashlight.
- Press again to cycle through modes: Flashlight, Strobe, SOS.
- Press and hold the LED button to turn off the flashlight.
5. 안전 정보 및 보호 조치
The LOKITHOR J1000 is equipped with multiple safety features to protect both the user and the vehicle.
- LiFePO4 배터리: Inherently safer and more stable than traditional lithium-ion batteries.
- 스마트 BMS: The intelligent Battery Management System provides comprehensive protection.
- 10 Types of Protection: Over Vol 포함tage, Over Current, Over Load, High-Temp & Low-Temp, Short Circuit, Spark-Proof, Reverse-Charge, Over Charge, and Reverse-Polarity Protection.
- IP65 방수: 먼지와 저압수 분사로부터 보호해 줍니다.
- 94V0 Flame Retardant: The enclosure material meets high standards for flame resistance.
Image 5.1: A visual breakdown of the 9 types of safety protection integrated into the LOKITHOR J1000's Smart BMS system, including over-voltage, over-current, and reverse-polarity protection.
6. 유지 관리 및 보관
6.1 일반 유지 관리
- 기기를 깨끗하고 건조하게 유지하세요. 부드러운 천으로 닦아주세요.amp 필요하다면 천을 사용하세요.
- 독한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 케이블과 클립을 정기적으로 점검하십시오.amps for any damage. Replace if worn or damaged.
6.2 보관
The J1000 has an impressive standby time of up to 24 months on a single full charge, making it ideal for long-term storage.
- 점프 스타터는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- Ensure the device is fully charged before storing for extended periods to maximize battery life.
- Periodically check the charge level, especially if stored for more than 6-12 months, and recharge if necessary.
Image 6.1: A graphic illustrating the LOKITHOR J1000's ability to maintain a charge for up to 24 months in standby mode, highlighting its low self-discharge rate.
7. 문제 해결
If you encounter issues with your LOKITHOR J1000, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다. | 배터리가 완전히 방전되었습니다. | Charge the J1000 fully before use. |
| Vehicle does not start (Normal Start). | 차량 배터리 voltage is too low (<8V) or connection issue. | Try the Force Start method. Ensure clamps는 올바른 배터리 단자에 단단히 연결되어 있습니다. |
| Green light on display is not flashing. | Incorrect connection or battery voltag너무 낮음. | 확인 CLamp connections. If battery is very low, use Force Start. |
| Device is not charging other devices. | J1000 battery is low or cable is faulty. | Ensure J1000 is charged. Try a different USB cable. |
| Abnormal Temperature Indicator (on display). | Device is too hot or too cold. | Allow the device to return to a safe operating temperature range (typically 0°C to 45°C or 32°F to 113°F). |
For issues not listed here, please contact LOKITHOR customer service.
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | J1000 |
| 시작 전류 | 1000 Amps |
| 피크 출력 전류 | 2000 Amps |
| 배터리 유형 | LiFePO4(인산철리튬) |
| 배터리 용량 | 8000mAh |
| 권tage | 12 볼트 |
| 엔진 호환성 | 가솔린 최대 6.0L, 디젤 최대 3.0L |
| 충전 입력 | USB-C (60W Two-Way Fast Charging) |
| USB 출력 | USB-A (18W), USB-C (60W Two-Way) |
| 방수 등급 | IP65 |
| 난연성 등급 | 94V0 |
| 품목 무게 | 2.01파운드(약 910그램) |
| 제품 치수 | 9.46 x 4.19 x 2.36 인치 |
9. 보증 및 고객 지원
9.1 보증 정보
The LOKITHOR J1000 Jump Starter comes with a 12-month limited warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
9.2 고객 서비스
For any questions, technical support, or warranty claims, please contact LOKITHOR customer service. Our support team is available 24/7 to assist you.
Please refer to the contact information provided on the LOKITHOR official web최신 지원 채널은 웹사이트 또는 구매 문서를 참조하십시오.
