1. 제품 오버view
The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.
Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.
2. 패키지 내용
- 1 x Wireless Watch Pager
- 플러그인 수신기 2개
- 1 x Call Button (with lanyard and double-sided patch)
- 1 x Small Screwdriver (for battery replacement)
- 3 x AAA Batteries (included, for call button)
3. 설정 지침
3.1 Initial Setup and Powering On
- 수신기 설정: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
- Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
- Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.
3.2 Modifying Ringtone and Pairing
The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:
Figure 2: Steps for ringtone selection and pairing.
- 수신기를 연결하세요: Ensure the receiver is plugged into a power socket.
- 벨소리 선택: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
- 페어링 모드 시작: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
- 쌍 송신기: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.
3.3 Call Button Installation Options
The call button can be used in various ways for convenience and accessibility:
- 목에 두르고 착용: Attach the included lanyard to the call button for easy access.
- 손목에 착용: The watch pager is designed to be worn on the wrist.
- Fix on Wall: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).
Figure 3: Versatile placement options for the call button.
4. 사용 설명서
Using the Daytech Caregiver Pager System is straightforward:
- 통화 시작: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
- Receiving an Alert: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
- 볼륨 조절: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.
Figure 4: Key features of the watch pager.
The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.
Figure 5: Wireless range illustration.
5. 유지관리
5.1 Battery Replacement for Call Button
The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.
Video 1: Instructions on how to attach the lanyard and replace the battery in the call button.
5.2 일반 관리
- 부드럽고 마른 천으로 닦아 기기를 깨끗하게 유지하세요.
- Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
- 장기간 사용하지 않을 때는 시스템을 서늘하고 건조한 곳에 보관하십시오.
6. 문제 해결
- 수신기로부터 알림이 없습니다.
- 수신기가 작동하는 전기 콘센트에 제대로 꽂혀 있는지 확인하세요.
- Check if the call button or watch pager battery needs replacement.
- Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
- Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
- Weak Signal or Intermittent Alerts:
- Relocate the receiver to a more central location or closer to the user.
- 다른 전자 장치로 인한 잠재적인 간섭이 있는지 확인하세요.
- Replace batteries in the call button/watch pager.
- Ringtone Not Changing:
- Follow the ringtone selection steps carefully (Section 3.2).
- Ensure you are pressing the correct 'Forward' or 'Backward' buttons.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 데이텍 |
| 모델 번호 | lc01 1-2w us |
| 최대 범위 | 800 Feet (Note: Practical indoor range is typically up to 100ft/30m due to obstacles) |
| 소음 수준 | 최대 110dB |
| 제어 방법 | 만지다 |
| 장착 유형 | Wall Mount (for call button) |
| 전원(수신기) | 플러그인 방식 (260볼트) |
| Power Source (Call Button) | AAA 배터리 3개 (포함) |
| 제품 치수 | 3.15 x 1.97 x 4.72 인치 |
| 품목 무게 | 9.1 온스 |
8. 보증 및 지원
Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.
For further assistance, please refer to the official Daytech web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.
