1. 제품 오버view
The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.
2. 중요한 안전 정보
경고: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified installer. Improper installation may cause serious injury or damage.
- 중량 용량: Do not exceed the maximum weight capacity of 88 lbs (40 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
- 벽 유형: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. 건식벽체에만 설치하지 마십시오. 설치 표면이 장비와 모든 부착된 하드웨어의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- VESA 호환성: Ensure your TV's VESA mounting pattern is within the supported range (100x100mm to 400x400mm).
- 도구: Use appropriate tools for installation. Always wear safety gear, including eye protection.
- 어린이들: 설치 장소에 어린이가 접근하지 못하도록 하십시오. 작은 부품은 질식 위험이 있습니다.
Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.
3. 패키지 내용
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.
- WALI FTM-2 TV Wall Mount (1 unit)
- 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
- 사용 설명서 (본 문서)
Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.
4. 호환성 확인
Before installation, confirm your television and wall meet the following requirements:
- TV 크기 : Compatible with most 32 to 70 inch flat or curved screen TVs.
- TV 무게: Your TV must weigh no more than 88 lbs (40 kg).
- 베사 패턴: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
- 벽 유형: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.
Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.
5. 설치 지침
Follow these steps carefully for a secure installation. It is recommended to have two people for installation.
1단계: 벽에 브래킷 부착
- Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
- Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
- Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
- 적절한 나사못과 와셔를 사용하여 벽판을 벽에 고정하십시오. 단단히 조이십시오.
Step 2: Attach Plate to TV
- TV에 흠집이 생기는 것을 방지하기 위해 부드럽고 깨끗한 표면에 TV 화면이 아래로 향하게 놓으세요.
- TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
- TV 장착 구멍에 맞는 나사, 와셔, 스페이서를 하드웨어 키트에서 선택하십시오.
- Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.
Step 3: Hang TV on Bracket
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
- Ensure the TV is centered and level.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided.
6. Adjustments (Operating)
The WALI FTM-2 mount offers flexible adjustments to achieve your desired view잉 각도.
- 경사: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
- 받침: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
- 수준 측량: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
- 확장/수축: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.
Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect view경험.
7. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 정기 점검: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
- 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
- 움직이는 부품: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.
8. 문제 해결
설치 중이나 설치 후에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- TV가 수평이 아닙니다: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
- 산이 불안정하다고 느껴집니다: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
- TV가 마운트에 맞지 않습니다: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
- Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.
If problems persist, contact WALI customer support for assistance.
9. 사양
| 모델 번호 | FTM-2 |
| TV 크기 호환성 | 32~70인치 |
| 중량 용량 | 88파운드(40kg) |
| VESA 호환성 | 100x100mm ~ 400x400mm |
| 기울기 각도 | +3° / -15° |
| 회전 각도 | ±60° |
| 레벨링 조정 | ±3° |
| 벽에서 연장된 부분 | 2.6인치(6.6cm) ~ 14인치(35.6cm) |
| 재료 | Reinforced Cold-Rolled Steel |
| 색상 | 검은색 |
10. 보증 및 고객 지원
WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.
WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.
- 연락하다: Refer to the WALI official web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
- 구매 증빙: 보증 청구를 위해 구매 증명서를 보관하십시오.
