1. 서론
The DonosHome BT60 is a professional battery tester designed for comprehensive analysis of 12V and 24V automotive batteries. It supports various battery types including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB, and Lithium batteries. This device performs starting system tests, charging system tests, and provides detailed battery health analysis, ensuring accurate diagnostics for your vehicle's electrical system.
The BT60 complies with international standards such as JIS, EN, DIN, SAE, and CCA, offering precise measurements within a range of 100-3000 CCA. Its user-friendly interface, color screen, and multi-language support make it an essential tool for both professional technicians and home users.
Image 1.1: The DonosHome BT60 Battery Tester with its main display and battery clamps.
2. 안전 정보
- 역 극성 보호 : The BT60 features built-in reverse polarity protection. If the clamps are connected incorrectly (red to negative, black to positive), the device will not operate, preventing damage to both the tester and the battery.
- 올바른 연결: 항상 연결 레드 CLamp 배터리에 양극(+) 단자 그리고 블랙 씨엘amp 배터리에 음극 (-) 단자.
- 외부 전원 불필요: The device is powered directly by the battery under test. No external power adapters or batteries are required, ensuring safe, passive testing without discharging the battery.
- 통풍: 납축전지는 폭발성 가스를 발생시킬 수 있으므로 작업 시 적절한 환기를 확보해야 합니다.
- 눈 보호: 배터리를 다룰 때는 항상 적절한 눈 보호 장비를 착용하세요.
- 명확하게 유지: 움직이는 엔진 부품에 손, 머리카락, 옷이 닿지 않도록 하십시오.
Image 2.1: Illustration of correct and incorrect battery clamp connections, highlighting the reverse polarity protection feature.
3. 패키지 내용
패키지를 열 때 모든 품목이 들어 있고 상태가 양호한지 확인하세요.
- DonosHome BT60 Battery Tester Unit
- 사용 설명서 (본 문서)
4. 제품 오버view
The DonosHome BT60 is designed for ease of use and durability. It features a robust casing, a clear color display, and intuitive controls.
4.1 주요 특징
- 표시하다: 3.2-inch color LCD screen with skeuomorphic design icons and 3 LED indicator lights.
- 통제 수단: 7 large rubber game controller-style buttons for easy navigation.
- 케이블: Over 1 meter long, made of high-quality nickel steel clips and 26/016 copper wire for stable communication.
- 배터리 호환성: Supports 12V and 24V batteries, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB, and Lithium types.
- 테스트 기능: Battery Test (State of Health, State of Charge, Voltage, Resistance), Cranking Test, Charging Test, Waveform Analysis, Review 역사.
- 표준: Complies with JIS, EN, DIN, SAE, and CCA standards.
- 정확성: Offers 99.9% accuracy with low test error values up to 3000 CCA.
- 언어: 12개 언어를 기본적으로 지원합니다.
이미지 4.1: 상세 view of the BT60's physical components, including the comfortable buttons, ABS material, LED light design, 3.2-inch screen, tough clamps, and thick cable.
이미지 4.2: 이상view of the multifunctional battery testing capabilities of the BT60.
5. 사양
| 모델 | BT60 |
| 권tag및 범위 | 12V and 24V (Does not support 6V, 8V, or 36V batteries) |
| CCA 범위 | 100-3000CCA |
| 지원되는 배터리 유형 | Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB, Lithium |
| 시험 표준 | JIS, EN, DIN, SAE, CCA, CA, BCI, MCA, IEC |
| 표시하다 | 3.2인치 컬러 LCD |
| 케이블 길이 | Over 1 meter (approx. 40.16 inches) |
| 품목 무게 | 10.2 온스(약 289그램) |
| 제품 치수 | 5.91 x 3.15 x 1.97인치(약 15 x 8 x 5cm) |
| 제조업체 부품 번호 | ACCP-BT60 |
| 한국어: | 751300562483 |
Image 5.1: Detailed table of supported battery measurement standards and their respective test ranges.
Image 5.2: Visual representation of the wide range of 12V and 24V battery types compatible with the BT60 tester.
6. 설정
The DonosHome BT60 is designed for plug-and-play operation, requiring minimal setup.
6.1 초기 연결
- 차량의 점화가 꺼져 있고 모든 부속품이 분리되어 있는지 확인하세요.
- 연결하다 레드 CLamp of the BT60 to the battery's 양극(+) 단자.
- 연결하다 블랙 씨엘amp of the BT60 to the battery's 음극 (-) 단자.
- The BT60 will power on automatically once correctly connected. If it does not power on, check the connections for proper polarity.
6.2 언어 설정
To set the desired language:
- From the Main Menu, navigate to "Tool Setup" using the arrow buttons and press "OK".
- Select "Language" from the Tool Setup menu and press "OK".
- Choose your preferred language from the list (e.g., English, Spanish, German) and press "OK" to confirm.
Image 6.1: Visual guide for navigating the menu to change the device language.
7. 사용 설명서
The BT60 offers several testing modes to diagnose your battery and vehicle's electrical system.
7.1 배터리 테스트
이 테스트는 배터리의 전반적인 상태와 충전량을 평가합니다.
- From the Main Menu, select the appropriate vehicle type (Motorcycle, Car, or Truck) and press "OK".
- Select the battery type (e.g., Regular Flooded, AGM Flat Plate, Lithium) and press "OK".
- Select the testing standard (e.g., CCA, EN, DIN) and press "OK".
- Enter the battery's rated CCA value (or other standard rating) as indicated on the battery label and press "OK".
- 테스터는 분석을 수행하고 상태(SOH), 충전 상태(SOC), 전압(Vol)을 포함한 결과를 표시합니다.tage, 그리고 내부 저항.
- The display will also provide a suggestion (e.g., "Good Battery", "Charge-Retest", "Bad Cell or Replace").
Image 7.1: Visual walkthrough of the battery testing process, from selecting vehicle type to viewing the final battery health report.
Image 7.2: Specific steps for testing Lithium batteries, demonstrating the selection process and result display.
7.2 크랭킹 테스트
This test evaluates the starting performance of the battery and the starter motor.
- From the Main Menu, select "Start the test" (or Cranking Test) and press "OK".
- Follow the on-screen prompts. Ensure the engine is off before proceeding.
- When prompted, start the engine. The tester will record the cranking voltag전자와 시간.
- The results will indicate if the cranking performance is "Normal", "Poor", or "Bad".
Image 7.3: Instructions for conducting a cranking test, including engine operation prompts and result interpretation.
7.3 충전 테스트
This test evaluates the vehicle's charging system, including the alternator and rectifier diode.
- From the Main Menu, select "Charging Test" and press "OK".
- Follow the on-screen instructions, which typically involve increasing the engine RPM to a specified level (e.g., 2000 RPM) for a duration (e.g., 10 seconds).
- The tester will measure loaded voltage, 언로드된 권tage, 그리고 리플 볼륨tage.
- The results will indicate if the charging system is "Normal" or if there are issues.
Image 7.4: Guide for performing a charging system test, including instructions for engine RPM and display of loaded/unloaded voltage and ripple.
7.4 파형 분석
The BT60 can display real-time voltage waveforms, which can be useful for advanced diagnostics.
- From the Main Menu, select "Waveform" and press "OK".
- Choose between "Real time Waveform" or "Cranking Waveform" and press "OK".
- The screen will display a graphical representation of the voltage over time, allowing for visual inspection of battery and charging system stability.
이미지 7.5: Examples of real-time and cranking voltage waveforms displayed on the BT60.
8. 유지관리
- 청소: 부드러운 천으로 기기를 닦으십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 저장: Store the BT60 in a dry, cool place away from direct sunlight and extreme temperatures.
- 케이블 관리: Avoid sharp bends or kinks in the cable. Ensure the clamps are clean and free of corrosion before and after use.
- 소프트웨어 업데이트: 제조사 확인해보세요 website periodically for any available software updates to ensure optimal performance.
9. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | 잘못된 clamp connection (reverse polarity) or battery voltag너무 낮음. | 빨간색 cl을 확인하세요amp 양극(+)이고 검은색입니다.amp is on negative (-). Check if the battery has sufficient voltage (above 5V for 12V batteries). |
| 부정확한 검사 결과. | Loose connections, incorrect battery type/standard selected, or battery not fully charged. | Verify secure connections. Re-enter correct battery parameters. Ensure battery is fully charged before testing for best accuracy. |
| 화면이 정지되었거나 응답하지 않습니다. | 일시적인 소프트웨어 오류입니다. | Disconnect the tester from the battery, wait a few seconds, then reconnect. If the issue persists, contact customer support. |
| Cannot test 6V, 8V, or 36V batteries. | The BT60 is designed only for 12V and 24V battery systems. | This is a product limitation. The BT60 is not compatible with these voltag전자 시스템. |
10. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official DonosHome web대지.
보증 청구를 위해 구매 증명서를 보관하십시오.
제조업체: ACCP
상표: 도노스홈
