Remco KP5200KXW/O

Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit Instruction Manual

Model: KP5200KXW/O

소개

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit. This kit is designed for automatic transmissions and includes an overhaul kit and clutches, providing the necessary components for a comprehensive transmission rebuild. Please read this manual thoroughly before beginning any work to ensure safe and correct procedures.

상자 안에 무엇이 들어있나요?

Your Remco Transmission Banner Kit includes the following components:

Remco 6T70 6T75E Gen 3 Transmission Banner Kit components including the box, various gaskets, seals, and clutch plates.

Image: Contents of the Remco 6T70 6T75E Gen 3 Transmission Banner Kit. The image displays the product packaging box, along with various components laid out, including a full set of gaskets, seals, and a collection of clutch and steel plates, essential for a complete transmission overhaul.

제품 특징

호환성

This transmission banner kit is compatible with the following vehicle models and years. Please verify your vehicle's specifications before installation.

차량 모델연령엔진
아카디아2007 - 20173.6 /V6
아카디아2013 - 20153.6 /V6
영기2007 - 20103.6 /V6
캡티바2013 - 20153.6 /V6
인클레이브2008 - 20113.6 /V6
인클레이브2013 - 20173.6 /V6
춘분2013 - 20153.6 /V6
Equinox Sport2008 - 20133.0, 3.6 /V6
G62007 - 20103.6 /V6
임팔라2013 - 20172.5, 3.6 /L4, V6
라크로스2011 - 20113.6 /V6
라크로스2013 - 20153.6 /V6
말리부2008 - 20113.5, 3.6 /V6
말리부 클래식2008 - 20083.5 /V6
시야2007 - 20103.6 /V6
에스알엑스2010 - 20133.0, 3.6 /V6
에스알엑스2013 - 20163.0, 3.6 /V6
지역2010 - 20133.0, 3.6 /V6
지역2013 - 20153.6 /V6
급류2008 - 20103.6 /V6
횡단2009 - 20103.6 /V6
횡단2013 - 20173.6 /V6
2008 - 20093.6 /V6
XL-72009 - 20093.6 /V6
엑스티에스2013 - 20173.6 /V6

설정 및 설치

Installing a transmission rebuild kit requires specialized knowledge and tools. It is highly recommended that installation be performed by a certified automotive technician. Improper installation can lead to severe damage to the transmission and vehicle.

일반 단계(전문가 설치 권장):

  1. 준비: Ensure the vehicle is safely lifted and secured. Drain transmission fluid and remove the transmission from the vehicle.
  2. 분해 : Carefully disassemble the transmission, noting the order and orientation of all components. Refer to a specific service manual for your vehicle's transmission model.
  3. 점검: Inspect all hard parts for wear, damage, or scoring. Replace any worn components not included in this kit as necessary.
  4. 구성 요소 교체: Replace all seals, gaskets, O-rings, clutch plates, and steel plates with the new components from the Remco kit. Ensure all new parts are properly lubricated with clean transmission fluid before installation.
  5. 재조립: Reassemble the transmission following the reverse order of disassembly. Pay close attention to torque specifications for all bolts.
  6. 설치: Reinstall the rebuilt transmission into the vehicle. Connect all lines, sensors, and electrical connectors.
  7. 유체 충전: Fill the transmission with the manufacturer-specified type and amount of new transmission fluid.
  8. 초기 확인: Perform initial checks for leaks and proper fluid levels.

메모: This kit provides the necessary components for a rebuild. Detailed step-by-step instructions for transmission disassembly and reassembly are specific to each transmission model and are typically found in a dedicated factory service manual for your vehicle.

운영 지침

After a transmission rebuild, proper break-in and careful operation are crucial for longevity.

유지

Regular maintenance is key to extending the life of your rebuilt transmission.

문제 해결

This section provides general troubleshooting tips. For complex issues, consult a qualified technician.

문제가능한 원인해결책
변속기 슬립Low fluid level, worn clutches (unlikely with new kit), internal pressure issues.Check fluid level and add if low. If problem persists, professional diagnosis is required.
Harsh shiftingIncorrect fluid level, faulty sensor, valve body issue.Verify fluid level. Consult a technician for diagnostic scan and repair.
유체 누출Improperly seated gasket/seal, damaged pan, loose bolts.Inspect for source of leak. Tighten bolts to spec, replace gasket/seal if damaged.
기어에 관여하지 않음Severely low fluid, internal mechanical failure.Check fluid level. If fluid is adequate, immediate professional inspection is needed.

명세서

기인하다세부 사항
제조업체렘코
상표렘코
품목 무게2722파운드
제품 치수18 x 5 x 16 인치
제조업체 부품 번호KP5200KXW/O
ASINB0BVL747JG
첫 번째 이용 가능 날짜12년 2023월 XNUMX일

보증 및 지원

보증 정보 및 고객 지원에 대해서는 다음을 참조하십시오.

관련 문서 - KP5200KXW/O

사전view REMCO LP-HP023 윤활 펌프 설치 지침
Tacoma, Tundra, FJ Cruiser, 4Runner 모델을 포함한 특정 Toyota 변속기용으로 설계된 REMCO LP-HP023 윤활 펌프 및 배관 하드웨어 팩에 대한 자세한 설치 가이드입니다.
사전view 4L80E & 4L85E Automatic Transmission Parts Catalog
Comprehensive parts catalog for 4L80E and 4L85E automatic transmissions, including kits, filters, friction plates, steel plates, seals, bearings, and more, with part numbers and specifications.
사전view GM 변속기용 Sonnax 라인 압력 부스터 키트 6L80-LB1 - 설치 및 기술 가이드
GM 변속기 성능 향상을 위해 설계된 Sonnax 6L80-LB1 라인 압력 부스터 키트에 대한 자세한 설명과 기술 정보를 제공합니다. 설치 단계, 장점, 그리고 관련 Sonnax 제품이 포함되어 있습니다.
사전view JGINYUE 마더보드 사용 설명서 및 사양
ERYING TECHNOLOGY의 JGINYUE 마더보드 사용 설명서에는 보증, 인터페이스 설명, 설치 주의 사항 및 기술 사양에 대한 자세한 설명이 나와 있습니다.
사전view Touch K50 I/O 디스플레이 배너를 제어하는 ​​장치 설명서
배너에 대한 정보를 얻기 위한 매뉴얼은 터치 K50 I/O 디스플레이 제어를 완료하는 데 도움이 됩니다. 제품의 파노라마, 특정 계획, 카블라지오 계획, 산업 자동화 응용 프로그램에 따른 제조 절차에 대한 액세서리를 제공합니다.
사전view Zone 2/Division 2용 IS1+ CPU 모듈 사용자 설명서 - R. STAHL
R. STAHL Zone 2/Division 2용 IS1+ CPU 모듈 (시리즈 9442/35) 사용자 설명서. , 작동, 지침 설치 및 기술 데이터에 대한 정보를 제공합니다.