소개
The Audiolab 7000A is an integrated amplifier designed to deliver high-fidelity audio performance. It combines pre-amplification, power amplification, and digital-to-analog conversion capabilities into a single, compact unit. This manual provides essential information for the safe and optimal use of your Audiolab 7000A.
기기를 작동하기 전에 이 설명서를 자세히 읽고 나중에 참조할 수 있도록 보관하십시오.
안전 정보
감전, 화재 또는 장치 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 이 제품을 비나 습기에 노출시키지 마십시오.
- 덮개를 제거하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다. 수리는 자격을 갖춘 전문가에게 맡기십시오.
- 적절한 환기를 유지하세요. 환기구를 막지 마세요.
- Disconnect the power cord from the wall outlet if the unit will be unused for a long period.
- 제품을 열원 근처나 직사광선이 비치는 곳에 두지 마십시오.
- 이 장치에 지정된 전원 공급 장치만 사용하세요.
풀기 및 설정
조심스럽게 포장을 풀고 amplifier and check for any signs of damage. Retain the original packaging for future transport.
놓기
Place the Audiolab 7000A on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate space around the unit for proper ventilation.
앞쪽 view of the Audiolab 7000A Integrated Amp리파이어, 쇼크asing its clean silver finish, central display, and control knobs.
오버view image displaying both the silver and black versions of the Audiolab 7000A Integrated Amplifier, highlighting its design and key features.
사이
연결을 하기 전에 다음을 확인하십시오. amp라이터의 전원을 끄고 전원 콘센트에서 플러그를 뽑습니다.
스피커 연결
Connect your loudspeakers to the speaker terminals on the rear panel. Ensure correct polarity (+ to + and – to –) for both channels. Use high-quality speaker cables for optimal performance.
소스 연결
7000A는 다양한 입력 옵션을 제공합니다.
- Analog Inputs (AUX1, AUX2, AUX3, Phono): Use RCA cables to connect analog sources such as CD players, tuners, or a turntable (Phono input).
- Digital Inputs (Optical 1, Optical 2, Coaxial 1, Coaxial 2, USB): Connect digital sources like TVs, Blu-ray players, or computers using appropriate digital cables. The USB input supports high-resolution audio from a PC.
- HDMI ARC : Connect to your TV's HDMI ARC port for audio return channel functionality.
전원 연결
Once all audio connections are made, connect the supplied power cord to the AC inlet on the rear panel and then to a suitable wall outlet.
Rear panel of the Audiolab 7000A, illustrating the comprehensive array of analog and digital input/output connections, including speaker terminals, RCA inputs, optical, coaxial, USB, and HDMI ARC ports.
작업
전원 켜기/끄기
Press the power button on the front panel or remote control to turn the unit on or off. The display will illuminate upon power-up.
입력 선택
Rotate the 'SEL' (Selector) knob on the front panel or use the input selection buttons on the remote to cycle through available audio inputs. The selected input will be shown on the display.
그만큼 amplifier's display showing the "PC USB" input selected, along with MQA and samp르 요금 정보입니다.
그만큼 amplifier's display showing the "Phono" input selected, indicated by a turntable icon.
볼륨 조절
Adjust the volume using the 'VOL' (Volume) knob on the front panel or the volume buttons on the remote control.
모드 선택
The 'MODE' knob allows you to select different operational modes or settings, such as tone controls or display options, depending on the amplifier's firmware.
원격 제어
The supplied remote control provides full functionality for operating the Audiolab 7000A from a distance. Ensure batteries are correctly inserted.
오디오랩 7000A amplifier shown with its dedicated remote control, emphasizing ease of use.
유지
To maintain the performance and appearance of your Audiolab 7000A, follow these guidelines:
- 청소: Use a soft, dry, lint-free cloth to wipe the surfaces. Do not use abrasive cleaners, waxes, or solvents.
- 통풍: 환기구에 먼지나 이물질이 없는지 확인하세요.
- 힘: Disconnect from power before cleaning or if unused for extended periods.
문제 해결
If you experience issues with your Audiolab 7000A, consult the following table before seeking professional service:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | 전원 코드가 연결되지 않았습니다. 전원 콘센트가 고장났습니다. 제품이 대기 모드입니다. | Check power cord connection; Try a different outlet; Press power button. |
| 소리가 나지 않습니다 | Incorrect input selected; Speaker cables loose/incorrectly connected; Volume too low; Mute activated. | 올바른 입력 소스를 선택하십시오. 스피커 연결 상태와 극성을 확인하십시오. 볼륨을 높이십시오. 음소거를 해제하십시오. |
| 왜곡된 소리 | Source signal too strong/weak; Speaker impedance mismatch; Damaged cables. | Check source output level; Ensure speakers match amplifier impedance; Inspect and replace cables if necessary. |
| 리모컨이 작동하지 않습니다 | Batteries depleted/incorrectly inserted; Obstruction between remote and unit. | Replace batteries; Ensure clear line of sight to the unit's IR receiver. |
명세서
The following are key specifications for the Audiolab 7000A Integrated Amp정수기:
- 패키지 크기: 20.67 x 19.25 x 6.57 인치
- 품목 무게: 23.8파운드
- ASIN: B0BTT5S6MF
- 제조업체: 오디오랩
- 첫 이용 가능 날짜: 7년 2023월 XNUMX일
For detailed technical specifications, please refer to the official Audiolab product page or contact customer support.
보증 및 지원
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official Audiolab web자세한 보증 약관은 해당 사이트에서 확인하세요.
For technical support, service, or inquiries, please contact your authorized Audiolab dealer or visit the Audiolab support section on their official website. When contacting support, please have your product model (7000A) and serial number ready.
더 많은 정보와 지원은 다음에서 찾을 수 있습니다. Audiolab Store on Amazon.
