소개
The SONICAKE Levitate is a versatile dual-effect pedal combining carefully selected digital delay and plate reverb effects. This pedal is designed to enrich your sound with expansive ambient textures. It features independent control over dry and wet signals for the delay, a large schedulable decay time for the reverb, and convenient trail and tap tempo functions for live performance. A special buffer bypass circuit ensures your guitar's tone remains pristine.
주요 특징
- Digital Delay/Plate Reverb: Two effects integrated into one compact guitar pedal.
- Extended Delay Time: Offers a maximum of 2000ms delay time.
- Adjustable Reverb Decay: Plate reverb features a large schedulable decay parameter.
- Performance Functions: Includes Trail and Tap Tempo functions for enhanced live show control.
- Buffer Bypass: Specially designed buffer bypass circuit maintains sound clarity.
- Power Requirement: Operates with a 9V center negative regular pedal power supply (not included).
컨트롤 및 기능
The Levitate pedal features intuitive controls for both its delay and reverb sections. Each effect can be activated independently or simultaneously.
Delay Section Controls
- 젖은: Adjusts the level of the delayed (wet) signal.
- 마른: Adjusts the level of the original (dry) signal.
- 피드백: 지연 반복 횟수를 제어합니다.
- 시간: Sets the delay time, up to 2000ms.
- DELAY Footswitch: Tap to switch the delay effect on/off. Hold to enter Tap Tempo mode.
Reverb Section Controls
- 리버브: Adjusts the overall level of the reverb effect.
- DECAY : 리버브 잔향의 길이를 조절합니다.
- 리버브 풋스위치: Tap to switch the reverb effect on/off. Hold to toggle the Trail function.
비주얼 오버view 컨트롤의
이미지: 위에서 아래로 view of the SONICAKE Levitate pedal with each control knob and footswitch clearly numbered for easy identification.
설정
- 전원 연결: Connect a standard 9V DC center-negative power adapter (not included) to the DC 9V input jack on the pedal.
- 입력 연결: 기타 또는 다른 악기를 표준 1/4인치 악기 케이블을 사용하여 페달 오른쪽의 INPUT 잭에 연결하십시오.
- 출력 연결: 페달 왼쪽의 OUTPUT 잭을 페달에 연결합니다. amp표준 1/4인치 악기 케이블을 사용하여 신호 체인의 다음 페달이나 리파이어를 연결합니다.
- 초기 설정: 중립적인 시작점으로 모든 조절 노브를 12시 방향으로 설정하십시오.
전원 입력 다이어그램
Image: Diagram illustrating the DC 9V center negative power input requirement for the pedal.
작동 지침
Activating Effects
- To activate the Delay effect, tap the right footswitch. The LED will illuminate.
- To activate the Reverb effect, tap the left footswitch. The LED will illuminate.
- Both effects can be used simultaneously.
Tap Tempo Function (Delay)
- Hold down the DELAY footswitch for approximately 2 seconds until the LED starts flashing.
- Tap the DELAY footswitch two or more times at your desired tempo. The pedal will automatically set the delay time to match your taps.
- Hold the DELAY footswitch again to exit Tap Tempo mode.
Trail Function (Reverb)
- Hold down the REVERB footswitch for approximately 2 seconds until the LED flashes. This toggles the Trail function.
- When Trail is ON, the reverb tail will naturally decay even after the effect is disengaged.
- When Trail is OFF, the reverb will cut off immediately when the effect is disengaged.
Demonstration Video: SONICAKE Levitate Guitar Effects Pedal
Video: A demonstration of the SONICAKE Levitate Guitar Effects Pedal, showcasing its various sounds and features.
Demonstration Video: Sonicake LEVITATE - Digital Delay Reverb 2 Effects in 1 Pedal
Video: A concise demonstration highlighting the digital delay and reverb capabilities of the Sonicake Levitate pedal.
유지
- 페달을 깨끗하고 부드럽게 유지하려면 부드럽고 마른 천으로 닦아주세요.
- 페달을 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
- 페달을 분해하거나 개조하지 마십시오. 그렇게 하면 보증이 무효화됩니다.
- Ensure proper power supply (9V DC center-negative) to prevent damage.
문제 해결
- 소리 없음: Check all cable connections (input, output, power). Ensure the power supply is correctly connected and functioning. Verify that your instrument and amplifier가 올바르게 작동하고 있습니다.
- 약하거나 왜곡된 소리: Check the battery (if applicable) or power supply. Ensure all cables are in good condition. Adjust the WET/DRY and REVERB/DECAY knobs to appropriate levels.
- 효과가 나타나지 않음: Ensure the footswitch is fully pressed and the corresponding LED illuminates.
- 원하지 않는 소음: Try using a different power supply or isolating the pedal from other noisy equipment. Ensure all cables are shielded.
명세서
| 특징 | 사양 |
|---|---|
| 품목 무게 | 15.5온스(440그램) |
| 제품 치수 | 4.88 x 3.54 x 2.16인치(12.39 x 8.99 x 5.49cm) |
| 품목 모델 번호 | QDS |
| 본체 소재 | 플라스틱 |
| 커넥터 유형 | 6.35mm 오디오 잭 |
| 하드웨어 인터페이스 | 1/4인치 오디오 |
| 신호 형식 | 디지털 |
| 전원 | 외부 전원 공급 장치로 전원 공급 |
| 권tage | 9 볼트 |
| 스타일 | Delay, Reverb, Buffer |
상자 안에 무엇이 들어있나요?
- LEVITATE Guitar Pedal
보증 및 지원
For warranty information and customer support, please refer to the official SONICAKE web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.





