ANNATTO 쿠커 2버너 EN417 사용 설명서

소개

Thank you for choosing the Outwell ANNATTO 2-Burner Cooker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new cooker. Please read this manual thoroughly before use and retain it for future reference.

안전 정보

가스 기기를 작동할 때는 항상 안전을 최우선으로 고려해야 합니다. 이 지침을 따르지 않을 경우 화재, 폭발, 재산 피해, 부상 또는 사망에 이를 수 있습니다.

• Use outdoors only. Never operate this appliance indoors or in an enclosed space.
• 적절한 환기를 확인하십시오.
• 가연성 물질에서 멀리 두세요.
• 사용 중에는 기기를 방치하지 마십시오.
• Check for gas leaks regularly using a soapy water solution. Never use a flame to check for leaks.
• 제품이 작동하는 동안 어린이와 애완동물이 제품에 접근하지 못하도록 하세요.
• Use only with the specified gas type and pressure. Refer to the product specifications.
• Allow the cooker to cool completely before cleaning or storing.

제품 끝view

The Outwell ANNATTO cooker is a portable two-burner gas stove designed for outdoor cooking. It features a compact design with integrated wind shields and individual burner controls.

그림 1: The Outwell ANNATTO cooker with its lid open, revealing the two gas burners and the removable pot supports. The integrated side wind shields are also visible, extended outwards.

그림 2: A top-down perspective of the cooker with the lid fully open. This view clearly shows the two burner grates and the underlying burners, ready for cooking. The gas hose connection point is visible on the right side.

그림 3: The Outwell ANNATTO cooker in its closed and compact state. The front panel displays the two control knobs for the burners and the central latch mechanism, making it easy to transport.

그림 4: 자세한 view of the cooker's control panel. It highlights the individual burner control knobs, the red ignition button, and the power switch, providing clear access for operation.

그림 5: This image shows the side of the cooker with the gas hose connected to the appliance's inlet. The hose leads to the regulator, which would then connect to a gas cylinder, illustrating the setup for fuel supply.

설정

1. 풀다: Carefully remove the cooker from its packaging. Retain packaging for storage if desired.
2. 위치: Place the cooker on a stable, level, non-combustible surface outdoors, away from any flammable materials, buildings, or vehicles. Ensure adequate clearance above and around the cooker.
3. Open Lid and Wind Shields: Unlatch the lid and open it fully. Extend the side wind shields outwards to provide protection from wind.
4. 가스 공급 연결:
   • Ensure both burner control knobs are in the "OFF" position.
   • Connect the gas hose (with regulator, if not integrated) to the cooker's gas inlet port. Ensure a secure, leak-free connection.
   • Connect the other end of the hose/regulator to your gas cylinder. Tighten all connections by hand, then use a wrench for a final snug fit if required, but do not overtighten.
5. 누출 테스트: Before first use and after every gas cylinder change, perform a leak test.
   • 액체 세제와 물을 같은 양으로 섞어 용액을 만듭니다.
   • Apply the solution to all gas connections (cooker inlet, hose connections, regulator connection to cylinder).
   • 가스 실린더 밸브를 천천히 엽니다.
   • If bubbles appear, there is a leak. Immediately close the gas cylinder valve and tighten the connection. Repeat the test. If leaks persist, do not use the cooker and contact customer support.

작동 지침

1. 점화 준비: Ensure the cooker is set up safely and the gas cylinder valve is open.
2. Ignite a Burner:
   • Push in and slowly turn one burner control knob counter-clockwise to the "HIGH" position.
   • Immediately press the red ignition button repeatedly until the burner ignites.
   • If the burner does not ignite within 5 seconds, turn the control knob to "OFF", wait 5 minutes for gas to disperse, and then repeat the ignition process.
3. 화염 조정: Once ignited, adjust the flame by turning the control knob between "LOW" and "HIGH" settings. A stable blue flame is ideal.
4. 요리: Place appropriate cookware on the pot supports over the lit burner.
5. 끄기: When finished cooking, turn the burner control knob clockwise to the "OFF" position. Close the valve on the gas cylinder. Allow the cooker to cool completely before handling or storing.

유지

Regular cleaning and maintenance will prolong the life of your cooker and ensure safe operation.

• 청소:
  • Ensure the cooker is completely cool and disconnected from the gas supply before cleaning.
  • Remove the pot supports and burner caps. Wash them with warm, soapy water. Rinse thoroughly and dry completely.
  • Wipe down the cooker body and stainless steel surfaces with a damp 천과 순한 세제를 사용하세요. 연마성 세제나 수세미는 사용하지 마세요.
  • Clean any food spills immediately to prevent stubborn stains.
• 저장: Store the cooker in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storage.
• 점검: Periodically inspect the gas hose for cracks, cuts, or damage. Check all connections for tightness. If any damage is found, replace parts immediately with genuine Outwell components.

문제 해결

For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact Outwell customer support.

명세서

• 모델 이름: ANNATTO cooker 2 burners EN417
• 상표: 아웃웰
• 부품 번호: 651158
• 크기(가로x세로x높이): 13.78" x 9.84" x 17.72" (35cm x 25cm x 45cm approx. when open/in use)
• 품목 패키지 크기(LxWxH): 17.24인치 x 9.13인치 x 2.68인치
• 패키지 무게: 1.44 킬로그램
• 색상: 회색
• 항목 수: 1
• 최대 에너지 출력: 2200 와트
• 전원: Gas (EN417 compatible)
• 재료: (Specific material not detailed, generally metal construction)

보증 및 지원

Outwell products are manufactured to high quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Outwell web대지.

For technical support, spare parts, or warranty claims, please contact Outwell customer service. Contact information can typically be found on the Outwell web사이트 또는 구매 영수증에서 확인하세요.

Web대지: www.outwell.com (지역별 차이가 있을 수 있으니 확인해 주세요.)