KKSB 아두이노 UNO Rev3 및 아두이노 메가 Rev3 케이스 사용 설명서

소개

This manual provides detailed instructions for the assembly, installation, and proper use of the KKSB Case, designed for Arduino UNO Rev3 and Arduino Mega Rev3 boards. This robust steel enclosure offers protection and versatile mounting options for your Arduino projects, including space for an Arduino Shield.

패키지 내용

조립을 진행하기 전에 모든 구성품이 있는지 확인하십시오.

KKSB Case (Steel, black powder-coated)
Mounting screws for Arduino board
Rubber feet (adhesive)
케이블 그로밋

KKSB Arduino Case Packaging — Figure 1: KKSB Arduino Case packaging. The package contains the steel case and necessary accessories for assembly.

설정 및 설치

Follow these steps to install your Arduino UNO Rev3 or Arduino Mega Rev3 board into the KKSB Case.

1. 사건 준비

Carefully remove the lid of the KKSB case by unscrewing the four corner screws. Note that some cases may have additional screws that do not need to be removed for lid access.
If using, attach the adhesive rubber feet to the bottom of the case for stability.

뒤쪽 view of KKSB Arduino Case — 그림 2: 후면 view of the KKSB case, showing the Ethernet port cutout, USB-B port, Reset button access, and Power input. This view helps identify port alignment.

2. Install the Arduino Board

Align your Arduino UNO Rev3 or Arduino Mega Rev3 board with the mounting holes inside the case. Ensure that the USB and power ports align with the corresponding cutouts on the case.
Secure the Arduino board to the case using the provided mounting screws. Do not overtighten.
If you are using an Arduino Shield, install it onto your Arduino board before closing the case. The case provides sufficient vertical space for most standard shields.

Arduino board installed inside KKSB case — Figure 3: An Arduino board correctly installed within the KKSB case, demonstrating proper alignment with internal mounting points and external port cutouts.

Arduino board and shield installed inside KKSB case — Figure 4: An Arduino board with an attached shield inside the KKSB case, illustrating the ample space provided for additional components.

KKSB case with Arduino UNO, Mega, and Ethernet Shield — Figure 5: Components including the KKSB case, an Arduino UNO, an Arduino Mega, and an Ethernet Shield, demonstrating compatibility and potential configurations.

3. 케이스 닫기

Replace the lid and secure it with the four corner screws.
If routing cables, use the provided cable grommet in the designated opening to protect wires from sharp edges.

작동 고려 사항

The KKSB Case is designed to protect your Arduino board while providing access to essential ports and features.

포트 접근: All standard Arduino UNO/Mega ports, including USB-B, power jack, and reset button, are accessible through labeled cutouts.
Shield Compatibility: The case accommodates an Arduino Shield, allowing for expanded functionality without requiring external modifications.
케이블 관리 : Openings are provided for routing cables, and a grommet is included for protection.
통풍: The case features ventilation slots to aid in passive cooling of the internal components.

각진 view of KKSB Arduino Case with ports — 그림 6: 각도 view of the KKSB case, highlighting the accessible ports and the overall robust construction.

장착 옵션

The KKSB Case offers several mounting solutions for integration into various environments.

DIN 레일 장착: The case supports DIN rail mounting for industrial or organized setups.
Pre-cut Mounting Holes: Additional pre-cut mounting holes are available for custom installations.
Kensington Lock Compatibility: A slot is included for a standard Kensington lock, providing a theft deterrent for public or shared environments.

KKSB Arduino Case mounted on a DIN rail — Figure 7: The KKSB case securely mounted on a DIN rail, demonstrating its compatibility with industrial mounting standards.

KKSB Arduino Case with Kensington lock installed — Figure 8: A Kensington lock inserted into the designated slot on the KKSB case, illustrating the security feature.

유지

The KKSB Case requires minimal maintenance.

청소: 외부를 부드럽고 마른 천으로 닦아주세요. 연마성 세제나 용제를 사용하지 마세요.
점검: Periodically check screws for tightness, especially if the case is subjected to vibrations or frequent movement.
환경: Ensure the case is used in a dry environment, away from excessive dust or moisture, to protect the internal electronics.

문제 해결

설치 또는 사용 중에 문제가 발생하면 다음 사항을 고려하십시오.

Board Not Fitting: Ensure you are using a compatible Arduino UNO Rev3 or Arduino Mega Rev3 board. Verify that no components on the board are obstructing the mounting posts or case edges.
Port Misalignment: Double-check the orientation of the Arduino board before securing it. The ports should align perfectly with the case cutouts.
뚜껑이 닫히지 않음: Ensure all internal components, especially shields, are seated correctly and not exceeding the case's internal height. Verify that no wires are pinched.

명세서

상표	KKSB 사건
모델 번호	7350001161273
호환성	Arduino UNO Rev3, Arduino Mega Rev3 (and compatible clones)
재료	Steel, black powder-coated
치수(길이x너비x높이)	2.99 x 4 x 4.5인치(7.59 x 10.16 x 11.43cm)
품목 무게	9.1kg(0.26온스)
특징	Space for Arduino Shield, labeled cutouts, cable routing openings, Kensington lock slot, DIN Rail mounting support, pre-cut mounting holes.

보증 및 지원

For warranty information or technical support, please refer to the official KKSB Cases web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Official KKSB Cases Web대지: kksb-cases.com

KKSB Cases 7350001161273