1. 서론
Thank you for choosing the Sygonix SY-4891004 Power Strip. This device is designed to provide convenient and safe power distribution for multiple electrical appliances. It features six grounded sockets and an integrated on/off switch for easy control. Please read this manual carefully before use to ensure proper operation and safety.
2. 안전 지침
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injuries.
- Do not exceed the maximum load capacity of the power strip. Refer to the specifications section for details.
- This power strip is designed for indoor use only. Do not expose it to moisture, rain, or extreme temperatures.
- 멀티탭을 여러 개 직렬로 연결하지 마십시오.
- Ensure the power strip is fully plugged into a grounded wall outlet.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
- 사용하지 않거나 청소하기 전에 멀티탭의 플러그를 벽면 콘센트에서 뽑으세요.
3. 제품 오버view
The Sygonix SY-4891004 power strip provides six grounded outlets and a master on/off switch to control power to all connected devices.
그림 1: 상단 view of the Sygonix SY-4891004 power strip, showing six grounded sockets and the illuminated on/off switch.
그림 2: 하단 view of the Sygonix SY-4891004 power strip, illustrating the mounting points and product labeling.
Figure 3: The Sygonix SY-4891004 power strip connected to a laptop, demonstrating its practical application in a home or office setting.
4. 설정
- 풀다: 전원 스트립을 포장에서 조심스럽게 꺼내세요.
- 놓기: Place the power strip on a stable, dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
- 벽면 콘센트에 연결: Plug the power strip's main plug into a properly installed and grounded wall outlet.
- 장치 연결: Plug your electrical devices into the available sockets on the power strip. Ensure that the total power consumption of all connected devices does not exceed the maximum load capacity.
5. 운영
The Sygonix SY-4891004 power strip features a master on/off switch that controls power to all six sockets simultaneously.
- 켜려면: Press the illuminated switch to the 'ON' (I) position. The switch will light up, indicating that power is supplied to the sockets.
- 끄려면: Press the illuminated switch to the 'OFF' (O) position. The light on the switch will turn off, cutting power to all connected devices.
Always turn off the power strip when not in use or when connecting/disconnecting devices to prevent accidental power surges or electric shock.
6. 유지관리
- 청소: 청소하기 전에 멀티탭의 전원 플러그를 벽면 콘센트에서 뽑으세요. 부드럽고 마른 천으로 표면을 닦으세요. 액체 세제나 연마제를 사용하지 마세요.
- 점검: Regularly inspect the power strip and its cable for any signs of damage, such as cuts, fraying, or discoloration. If damage is found, discontinue use immediately and replace the unit.
- 저장: 장시간 사용하지 않을 경우, 전원 스트립을 직사광선과 습기를 피해 시원하고 건조한 곳에 보관하세요.
7. 문제 해결
연결된 기기에 전원이 공급되지 않습니다.
- Ensure the power strip's on/off switch is in the 'ON' position and illuminated.
- Check if the power strip's main plug is securely inserted into a working wall outlet.
- Verify that the wall outlet itself is receiving power (e.g., by plugging in another device directly).
- Check if the total power consumption of connected devices exceeds the power strip's maximum load. Disconnect some devices if necessary.
- Inspect the power strip and its cable for any visible damage. If damaged, do not use.
If the issue persists after performing these checks, contact customer support for assistance.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 시고닉스 |
| 모델 | SY-4891004 |
| 소켓 수 | 6 (접지됨) |
| 통합 스위치 | 예 |
| 제품 치수 | 33 x 5.4 x 4.4cm |
| 무게 | 2kg |
| 배터리 포함 | 아니요 |
| 필요한 배터리 | 아니요 |
9. 공식 제품 영상
이 영상은 360도를 제공합니다 view 제품의, 쇼케이스asin다양한 각도에서 디자인과 특징을 살펴봅니다.
10. 보증 및 지원
Sygonix products are manufactured to high-quality standards. For information regarding warranty terms, technical support, or service, please refer to the documentation provided with your purchase or visit the official Sygonix web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
