LOKITHOR J2250 PRO Jump Starter User Manual

1. 서론

This manual provides essential information for the safe and efficient operation of your LOKITHOR J2250 PRO Jump Starter. Please read all instructions carefully before use and retain this manual for future reference.

The LOKITHOR J2250 PRO is a powerful and versatile device designed to jump-start vehicles with 12V batteries, charge electronic devices, and provide illumination in emergency situations. It features advanced LiFePO4 battery technology for enhanced safety and longevity.

2. 안전 정보

일반 경고

• 배터리를 다룰 때는 항상 보호 안경과 장갑을 착용하세요.
• Do not operate the jump starter if it is damaged or has been dropped.
• 점프 스타터를 어린이와 애완동물이 접근할 수 없는 곳에 보관하세요.
• Do not expose the jump starter to extreme temperatures or direct sunlight for extended periods.
• 사용 및 충전 시에는 적절한 환기를 유지하세요.
• cl을 단락시키지 마십시오amps.
• 얼어붙은 배터리를 점프 스타트하려고 하지 마세요.
• 점프 스타트에 대한 구체적인 절차는 차량 사용 설명서를 참조하세요.

Integrated Protections

The J2250 PRO is equipped with 10 safety protection mechanisms to ensure safe operation:

• 스파크 방지 보호 기능: 연결 중 스파크 발생을 방지합니다.
• 역극성 보호: Protects against incorrect clamp 사이.
• 단락 보호: 단락 방지 장치.
• 역충전 방지 기능: Prevents reverse current flow from the vehicle battery.
• 저온 보호: 추운 환경에서도 안전한 작동을 보장합니다.
• 고온 보호: 과열을 방지합니다.
• 오버볼tage 보호: 과도한 볼륨으로부터 보호합니다tage.
• 과부하 보호: 과도한 전류 소모로 인한 손상을 방지합니다.
• 과충전 보호: Safeguards the internal battery during charging.
• 과전류 보호 : 과전류로부터 보호합니다.

3. 제품 특징

• 강력한 성능: 2250을 제공합니다 amp peak starting current. Capable of starting 8.0L gas and 6.0L diesel engines. Operates in extreme temperatures from -4°F to 140°F.
• LiFePO4 기술: Utilizes Lithium Iron Phosphate battery cells for over 2000 cycles at 100% depth of discharge, offering 5 times longer lifespan than lead-acid and 2 times longer than standard lithium starters. Enhanced chemical stability reduces risk of thermal runaway.
• 60W 양방향 고속 충전: Fully charges the jump starter in approximately 60 minutes. Can jump-start a vehicle in as little as 5 minutes after a quick charge.
• Multi-Purpose LED Flashlight: Integrated 300-lumen LED flashlight with 6 modes: 100%, 50%, 10% brightness, SOS, strobe, and blink.
• 보조 배터리 기능: Equipped with USB-C (60W input/output) and USB-A (18W output) ports to charge phones, tablets, laptops, and other devices.
• IP65 등급: Water and dustproof design ensures reliable performance in harsh environments.
• ConnectMAX Technology: Automatically detects connection impedance between clamps and car battery for optimal performance and reliable starting.
• Ultra-Long Standby Time: Maintains charge for up to 36 months on a full charge.

4. 시작하기 및 설정

4.1 점프 스타터 충전하기

Before first use, fully charge your LOKITHOR J2250 PRO. Use the provided USB-C to USB-C cable and a compatible 60W USB-C power adapter (not included) for fast charging. The unit can be fully charged in about 60 minutes.

그림 4.1: The LOKITHOR J2250 PRO connected to a USB-C charger for fast charging. The display shows charging status.

The jump starter can also be charged using a 12V car adapter (DC Output 5A/20V, Max 60W) for convenient charging while on the go.

그림 4.2: The LOKITHOR J2250 PRO charging inside a vehicle using the 12V adapter.

4.2 상자 내용물

Your LOKITHOR J2250 PRO package includes the following items:

• J2250 PRO Jump Starter Unit
• 점프 스타터 클립amp초 (x1)
• USB-A to USB-C Cable (x1)
• USB-C-USB-C 케이블(x1)
• Accessories Storage Bag (x1)
• 사용 설명서(x1)

그림 4.3: All items included in the LOKITHOR J2250 PRO Jump Starter package.

5. 사용 설명서

5.1 Normal Jump Start Procedure

1. 빨간색 CL을 붙입니다.amp 차량 배터리의 양극(+) 단자에 연결하십시오.
2. 검은색 CL을 부착합니다.amp 차량 배터리의 음극(-) 단자에 연결하세요.
3. Power on the LOKITHOR J2250 PRO. The display will show the battery voltage and the green light will flash, indicating it's ready.
4. 차량을 시동하세요.
5. Once the vehicle starts, power off the jump starter and disconnect the clamps.

그림 5.1: Visual guide for the normal jump start process.

5.2 Boost Mode Jump Start Procedure (For Severely Discharged Batteries)

If the vehicle battery is severely discharged (below 2V), the normal jump start procedure may not work. In this case, use the Boost Mode:

1. 빨간색 CL을 붙입니다.amp 차량 배터리의 양극(+) 단자에 연결하십시오.
2. Long press the "M" (Boost) button for more than 5 seconds. The display will show "Boost" and the green light will flash.
3. 검은색 CL을 부착합니다.amp 차량 배터리의 음극(-) 단자에 연결하세요.
4. 30초 이내에 차량 시동을 걸십시오.
5. Once the vehicle starts, power off the jump starter and disconnect the clamps.

그림 5.2: Visual guide for the Boost Mode jump start process.

5.3 LED 손전등 사용법

The integrated LED flashlight has multiple modes for various situations:

• 100% 밝기: Press the flashlight button once.
• 50% 밝기: Press the flashlight button twice.
• 10% 밝기: Press the flashlight button three times.
• 구조 요청 모드: Press the flashlight button four times.
• 스트로브 모드: Press the flashlight button five times.
• 깜빡임 모드: Press the flashlight button six times.
• To turn off, press the flashlight button seven times or long-press the button in any mode.

그림 5.3: Illustration of the various modes of the multi-purpose LED flashlight.

5.4 보조 배터리 기능

The LOKITHOR J2250 PRO can serve as a portable power bank for your electronic devices:

• USB-C 포트: Provides up to 60W output for fast charging compatible devices.
• USB-A 포트: Provides up to 18W output for charging various USB-powered devices.

그림 5.4: The LOKITHOR J2250 PRO charging multiple electronic devices simultaneously.

6. 유지관리

• Recharge the jump starter after each use to ensure it's ready for the next emergency.
• 제품을 서늘하고 건조한 곳에 직사광선과 습기를 피해 보관하십시오.
• For long-term storage, recharge the unit every 3-6 months to maintain battery health.
• 부드러운 천으로 외부를 청소하고 damp 옷감. 가혹한 화학 물질이나 연마재를 사용하지 마십시오.

7. 문제 해결

If the jump starter displays an error code or does not function as expected, refer to the following common issues:

• 장치의 전원이 켜지지 않습니다. Ensure the unit is charged. If fully charged, contact customer support.
• Green light not flashing in Normal Start: 확인 CLamp connections. Ensure battery voltage is above 2V. If not, use Boost Mode.
• "Boost" light not activating: CL을 확인amps are correctly attached. If battery is extremely low, try charging the jump starter for a few minutes before attempting Boost Mode again.
• Vehicle does not start after jump-start: Check vehicle battery terminals for corrosion. Ensure proper clamp connection. Vehicle may have other mechanical issues.
• 오류 코드 201: This error typically indicates a charge problem or internal fault. Try fully discharging and recharging the unit. If the error persists, contact customer support.

For further assistance, please refer to the detailed user manual included in the package or contact LOKITHOR customer service.

8. 사양

9. 보증 및 지원

LOKITHOR products typically come with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official LOKITHOR web자세한 보증 정보와 조건은 사이트에서 확인하세요.

For any after-sales questions, technical support, or warranty claims, please contact LOKITHOR customer service. Contact information can usually be found in the user manual or on the official LOKITHOR web대지.