1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the QttyElok Bluetooth Tuya Access Control System Kit. This system offers multiple access methods including fingerprint, RFID card, password, NFC, and control via the Tuya mobile application. It is designed for secure and convenient access management in various environments.
2. 패키지 내용
아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하세요.
- Access Control Keypad (Waterproof RFID Keypad Fingerprint Biometrics)
- 180kg 전자 자석 잠금장치
- 전원 공급 제어 장치
- 문 출구 버튼
- 10pcs 13.56MHz Keyfobs
이미지 2.1: 이상view of the QttyElok Access Control System Kit components.
3. 안전 정보
설치 및 작동 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.
- 배선 또는 설치 작업을 하기 전에 반드시 전원 공급 장치를 차단하십시오.
- All electrical connections should be performed by a qualified professional if you are unsure.
- 전원 공급 장치를 습기나 극한 온도에 노출시키지 마십시오.
- The access control keypad is IP68 waterproof, suitable for outdoor use, but avoid submerging it in water.
4. 설정 및 설치
4.1 배선도
Follow the wiring diagram carefully to connect the access controller, power supply, magnetic lock, and exit button.
Image 4.1: Detailed wiring diagram for connecting all components of the access control system.
4.2 구성 요소 설치
Access Controller Keypad: Mount the keypad at a convenient height near the door. The keypad is IP68 waterproof and features a touch screen panel with backlight for visibility in low light conditions.
Image 4.2: Dimensions of the access control keypad (70mm x 140mm x 16mm).
자석 잠금 장치: Install the 180KG (350lbs holding force) magnetic lock on the door frame and the armature plate on the door. This is a fail-safe (NC type) lock, meaning it locks when powered on and unlocks when power is off. It is suitable for wooden, metal, security, and glass doors.
Image 4.3: Dimensions of the 180KG magnetic lock (172mm x 40mm x 21mm for the lock, 130mm x 32mm x 11mm for the armature plate).
전원 공급 제어 장치: Mount the power supply unit in a secure, dry location. Ensure proper ventilation.
Image 4.4: Dimensions of the power supply control unit (105mm x 68mm x 34mm) and its specifications.
출구 버튼: Install the exit button on the inside of the door for convenient egress. It supports both Normally Closed (NC) and Normally Open (NO) modes.
Image 4.5: Dimensions of the door exit button (86mm x 86mm) and the included RFID keyfobs.
5. 사용 설명서
5.1 접근 방법
The system supports multiple methods for unlocking the door:
- 지문: Place a registered finger on the biometric sensor.
- RFID 카드: Present a registered 13.56MHz RFID card or keyfob to the keypad.
- 비밀번호: 터치 키패드에 등록된 비밀번호를 입력하세요.
- NFC : Use a mobile phone with NFC functionality to unlock.
- 투야 앱: Control the lock remotely via the Tuya Smart application on your smartphone.
Image 5.1: Visual representation of different access methods supported by the system.
5.2 Tuya 앱 통합
The access control keypad can be paired with the Tuya Smart app for remote control and advanced user management via Bluetooth. A gateway is not required for this functionality.
Tuya Smart 앱을 다운로드하세요: 제공된 QR 코드를 스캔하거나 방문하세요. http://smart.tuya.com/download to download the Tuya Smart application.
Image 5.2: Instructions for downloading the Tuya Smart app and examples of its interface.
원격 제어: Once paired, you can unlock the door remotely using the Tuya app on your mobile phone.
Image 5.3: Demonstrates remote unlocking of the keypad using the Tuya Smart app via Bluetooth.
5.3 User Management and Programming
The Tuya app allows for comprehensive management of users, including adding fingerprints, RFID cards, and passwords. You can also generate temporary access codes and view access logs.
Image 5.4: Screenshots of the Tuya app showing options for temporary password sharing, managing user settings, adding new users (fingerprint, code, card), and review액세스 로그를 기록합니다.
6. 유지관리
To ensure optimal performance and longevity of your access control system, follow these maintenance guidelines:
- 키패드 표면은 부드러운 천으로 정기적으로 닦아주세요.amp 옷감. 연마성 세제를 피하십시오.
- Keep the magnetic lock and armature plate free from dirt and debris to ensure proper contact and holding force.
- 정기적으로 모든 배선 연결부의 조임 상태와 마모 여부를 점검하십시오.
7. 문제 해결
출입 통제 시스템에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- 시스템 전원이 켜지지 않음: Check all power connections, ensure the power supply unit is receiving input voltage (AC110-260V), and verify the output DC12V.
- Magnetic lock not engaging/disengaging: Verify wiring to the magnetic lock. Ensure the power supply is providing consistent DC12V. Check for any obstructions between the lock and armature plate.
- 키패드가 응답하지 않음: Check power to the keypad. Ensure all data wires are correctly connected as per the wiring diagram.
- Fingerprint/RFID/Password not working: Ensure the user is properly registered in the system or via the Tuya app. Re-register if necessary.
- Tuya App connectivity issues: Ensure Bluetooth is enabled on your phone and the keypad is within range. Restart the app and try pairing again.
문제가 지속되면 고객 지원에 문의하여 추가 지원을 받으십시오.
8. 사양
| 상표 | 큐티엘로크 |
| 모델 번호 | F20tuya Kit |
| 전원 | Corded Electric, DC |
| 입력 Voltage (전원 공급) | 110~240VAC |
| 출력 볼륨tage (전원 공급) | 직류12V |
| Momentary Current (Power Supply) | 3A |
| Time Delay (Power Supply) | 0~15 seconds delay locks |
| Access Controller Dimensions | 70 x 140 x 16mm |
| 자석 잠금 유지력 | 180KG / 350 파운드 |
| RFID 주파수 | 13.56MHz (Mi-fare 1k) |
| 사용자 용량 | 100명의 사용자 |
| Waterproof Rating (Keypad) | IP68 |
| 연결 기술 | 무선(블루투스) |
| 호환 장치 | Smartphone (Tuya App) |
9. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.
