1. 서론
The AUTOPHIX V007 is a professional diagnostic scanner designed for Volkswagen (VW), Audi, Skoda, and Seat vehicles, as well as universal OBD II compliant cars manufactured from 1996 onwards. This tool provides comprehensive system diagnostics, allowing users to read and clear fault codes, view live data, and perform various special functions to maintain vehicle health and safety.
2. 제품 오버view
The AUTOPHIX V007 diagnostic scanner offers a wide range of functions for both specific VW Group vehicles and general OBD II compliant cars. It features a user-friendly interface with a clear display and intuitive navigation buttons.
Image: AUTOPHIX V007 scanner displaying advanced functions for VW Group vehicles, including Engine, SRS (Airbag), Oil Reset, EPB, TPMS, Inter Monitor, Transmission, ABS, Immobilizer, SAS, Battery Check, and Throttle Learning.
주요 기능은 다음과 같습니다.
- Full system diagnosis for VW, Audi, Skoda, and Seat vehicles.
- Standard OBD II functions for all 1996 and newer vehicles.
- Special functions such as Oil Service Reset, Electronic Parking Brake (EPB) replacement, and Throttle Adaptation.
Image: AUTOPHIX V007 scanner showing full system diagnosis for VW, Audi, Seat, Skoda vehicles, covering systems like Auto Trans, HVAC, Steering Wheel, Instruments, and more.
3. 설정
To begin using your AUTOPHIX V007 diagnostic scanner, follow these steps:
- OBD II 포트를 찾으십시오: The 16-pin Data Link Connector (DLC) is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
- 스캐너 연결: Plug the scanner's OBD II cable into the vehicle's DLC. Ensure a secure connection.
- 전원 켜기: Turn the vehicle's ignition to the 'ON' position (engine off). The scanner will automatically power on and display the main menu.
4. 사용 설명서
스캐너 메뉴를 탐색하려면 다음을 사용하십시오. UP 그리고 아래에 화살표 버튼을 누르세요. 입력하다 선택을 확정하기 위해 EXIT 이전 화면으로 돌아갑니다.
4.1. Universal OBD II Functions
These functions are applicable to all OBD II compliant vehicles (1996 and newer).
Image: AUTOPHIX V007 scanner showing universal OBD II functions, including Read Fault Code, Erase Fault Code, Read VIN, Review DTC, and System Protocol.
- 오류 코드 읽기: Select this option to retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's Engine Control Unit (ECU).
- 오류 코드 삭제: After repairs, select this to clear DTCs and turn off the Check Engine Light (MIL). Ensure the issue is resolved before clearing codes.
- 차량 식별 번호(VIN)를 읽어보세요: Displays the Vehicle Identification Number.
- Review DTC: 당신이 할 수 있습니다 view previously stored DTCs.
- System Protocol: Provides information about the communication protocol used by the vehicle.
4.2. VW Group Specific Functions
The V007 provides advanced diagnostic capabilities for Volkswagen, Audi, Skoda, and Seat vehicles.
Image: AUTOPHIX V007 compatibility with various VW, Audi, Seat, and Skoda models, including Golf, Jetta, A3, A4, Leon, Kodiaq, and more.
These functions include, but are not limited to:
- Engine System Diagnostics
- SRS (Airbag) System Diagnostics
- ABS System Diagnostics
- Transmission System Diagnostics
- 전자 주차 브레이크(EPB)
- 타이어 공기압 모니터링 시스템(TPMS)
- 조향각 센서(SAS) 보정
- 배터리 확인
- 이모빌라이저 시스템
4.3. 특수 기능
The V007 offers several special service functions for specific vehicle maintenance tasks.
Image: AUTOPHIX V007 displaying powerful special functions, including Oil Service Reset, EPB Replace Brake Pads, and Throttle Adaptation.
- 오일 서비스 재설정: 오일 교환 후 오일 서비스 표시등을 재설정합니다.
- EPB 브레이크 패드 교체: Safely retracts and reinstates the electronic parking brake calipers for brake pad replacement.
- 스로틀 적응: 청소 또는 교체 후 스로틀 바디 위치를 다시 학습합니다.
5. 유지관리
To ensure the longevity and optimal performance of your AUTOPHIX V007 scanner:
- 기기를 깨끗하고 먼지와 습기가 없는 상태로 유지하세요. 청소 시에는 부드럽고 마른 천을 사용하세요.
- 기기를 떨어뜨리거나 극한 온도에 노출시키지 마세요.
- 정기적으로 제조업체를 확인하십시오 website for firmware updates to ensure compatibility with the latest vehicle models and diagnostic protocols.
- 스캐너를 사용하지 않을 때는 보호 케이스에 보관하십시오.
6. 문제 해결
If you encounter issues while using the AUTOPHIX V007, consider the following:
- 장치 전원이 켜지지 않음: Ensure the OBD II cable is securely connected to the vehicle's DLC and the ignition is in the 'ON' position. Check the vehicle's battery voltage.
- 통신 오류: Verify that the vehicle is OBD II compliant and manufactured after 1996. Ensure the connection is secure. Try connecting to a different OBD II compliant vehicle to rule out a vehicle-specific issue.
- Incorrect Readings/Functions: Ensure the scanner's firmware is up to date. Refer to the specific function's instructions within the scanner's menu or the manufacturer's web자세한 안내 사이트.
For persistent issues, please contact AUTOPHIX customer support.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | V007 |
| 제조업체 | V007 플러스 |
| 품목 무게 | 1.18파운드 |
| 패키지 크기 | 7.92 x 5.12 x 2.92 인치 |
| 화면 크기 | 7 인치 |
8. 보증 및 지원
AUTOPHIX provides lifetime customer support for the V007 diagnostic scanner. For detailed warranty information, product registration, or technical assistance, please visit the official AUTOPHIX web사이트를 방문하거나 고객 서비스 부서에 직접 문의하세요.
AUTOPHIX Official Store: Visit the AUTOPHIX Store on Amazon
