1. 서론
The KES Standing Towel Rack (Model BTH217S3-2) is designed to provide a stable and convenient solution for drying and storing towels in your bathroom or other suitable areas. Featuring a 3-tier design and a heavy marble base, this rack accommodates various towel sizes while ensuring stability and durability. Constructed from SUS304 stainless steel, it is built to resist rust and corrosion, making it ideal for humid environments.
Figure 1: KES 3-Tier Standing Towel Rack with various towels displayed.
2. 설치 및 조립
Your KES Standing Towel Rack is designed for quick and straightforward assembly. No special tools are required beyond what is included in the hardware pack.
2.1. 부품 목록
Figure 2: Detailed parts list for the KES Standing Towel Rack assembly.
Before beginning assembly, ensure all components are present and undamaged. Refer to Figure 2 for a visual guide to the parts.
- Highest Bar: (1 조각)
- Medium Bar: (1 조각)
- Lowest Bar: (1 조각)
- 술집: (3 pieces, these are the vertical support bars)
- 베이스: (1 piece, natural marble)
- 미끄럼 방지 패드: (1 strip with multiple pads)
- 예비 부품: (Screws, washers, rubber rings)
- 설치 가이드: (본 매뉴얼)
2.2. 조립 단계
Follow these steps to assemble your towel rack:
- Carefully unbox all components and lay them out on a clean, soft surface to prevent scratches.
- Attach the three vertical support bars (labeled "Bar" in Figure 2) to the marble base (labeled "Base"). Ensure the pre-installed screws are aligned with the holes in the base. Tighten securely using the provided tool.
- Attach the horizontal towel bars (Highest, Medium, and Lowest Bars) to the top of their respective vertical support bars. The screws for these connections are also pre-installed. Ensure a snug fit to prevent wobbling.
- Peel and apply the anti-slip pads to the bottom of the marble base. These pads protect your floor and enhance stability.
Figure 3: Visual guide for the two main assembly steps.
For a visual demonstration of the assembly process, please watch the official product video below:
Video 1: Official KES assembly and feature overview for the 3-Tier Standing Towel Rack. This video demonstrates the simple assembly process and highlights key product features.
3. 사용 설명서
The KES Standing Towel Rack is designed for convenient and efficient towel storage.
- 놓기: Position the towel rack on a flat, stable surface in your bathroom, laundry room, or any area where towel storage is needed. The heavy marble base and anti-slip pads ensure it remains stable and does not tip over, even on slippery floors.
- Towel Capacity: The 3-tier design allows for amp르 스토리지.
- The tallest bar (36 inches / 91 cm) is suitable for bath sheets.
- The middle bar (32 inches / 81 cm) is ideal for bath towels.
- The shortest bar (28 inches / 71 cm) can hold hand towels, washcloths, or smaller garments.
- Maximizing Airflow: For optimal drying, spread towels evenly across the bars to allow for proper air circulation.
Figure 4: The 3-tier design maximizes storage capacity for various towel sizes.
Figure 5: Dimensions of the towel rack bars, illustrating how different towel sizes fit.
4. 유지관리
To ensure the longevity and appearance of your KES Standing Towel Rack, follow these simple maintenance guidelines:
- 청소: Wipe down the stainless steel bars and marble base regularly with a soft, damp cloth. For stubborn spots, a mild soap solution can be used. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- 녹 방지: The SUS304 stainless steel is inherently rust-resistant. However, to maintain its pristine condition, ensure towels are not left excessively wet on the bars for prolonged periods, especially in poorly ventilated areas.
- 베이스 케어: The natural marble base is durable but can be susceptible to staining from acidic liquids. Clean spills immediately.
- 안정성 확인: Periodically check the tightness of all screws to ensure the rack remains stable and wobble-free. Tighten if necessary.
5. 문제 해결
If you encounter any issues with your KES Standing Towel Rack, refer to the following common troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Towel rack feels wobbly. | Screws may have loosened during use or were not fully tightened during assembly. | Ensure all screws connecting the bars to the base are securely tightened. The design includes gaskets and rubber rings to prevent looseness; ensure these are properly seated. |
| Rack slides on the floor. | Anti-slip pads are missing or not properly applied. | Verify that the four circular anti-slip adhesives are firmly attached to the bottom of the marble base. If missing, use the provided spare pads or contact support for replacements. |
| Rust spots appear on the stainless steel. | Prolonged exposure to standing water or harsh chemicals; external contaminants. | While SUS304 stainless steel is rust-resistant, it is not rust-proof under all conditions. Clean and dry the bars regularly. Avoid using abrasive cleaners or steel wool. If spots appear, gently clean with a non-abrasive stainless steel cleaner. |
Figure 6: The heavy 8.23 lbs (3.75 kg) marble base prevents the rack from toppling over.
Figure 7: Anti-slip pads on the base protect floors and enhance stability.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | BTH217S3-2 |
| 색상 | 브러시드 마감 |
| 재료 | SUS304 Stainless Steel, Natural Marble |
| 제품 크기(L x W x H) | 가로 10.6인치 x 세로 19.7인치 x 높이 37인치 (약 27cm x 50cm x 94cm) |
| 품목 무게 | 8.23파운드(3.75kg) |
| 설치 유형 | 독립형 |
| 계층 수 | 3 |
| Tallest Bar Height | 36인치(91cm) |
| Middle Bar Height | 32인치(81cm) |
| Shortest Bar Height | 28인치(71cm) |
| 조립이 필요합니다 | 예 |
7. 보증 정보
The KES Standing Towel Rack (Model BTH217S3-2) comes with a One Year Manufacturer's Warranty본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해서는 구매 증빙 자료를 보관해 주십시오.
8. 고객 지원
For any questions, concerns, or assistance with your KES product, please contact KES Customer Support. Refer to the contact information provided on the product packaging or the official KES web최신 지원 채널을 제공하는 사이트입니다.
또한 방문할 수 있습니다 KES Store on Amazon 자세한 정보와 제품 리소스를 확인하세요.
