델타코 게이밍 GAM-135-W

1. 안전 지침

Read this entire instruction manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

• Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) or the maximum screen size of 32 inches. Serious injury or property damage may occur.
• This product is designed for installation on a desk. Ensure the desk surface is stable and capable of supporting the combined weight of the monitor arm and the monitor.
• 이 제품은 의도된 용도로만 사용하십시오.
• 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
• 사용하기 전에 모든 구성 요소가 단단히 고정되어 있는지 확인하십시오.

2. 패키지 내용

Verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not attempt to assemble the product. Contact customer support for replacement parts.

• 모니터 암 어셈블리
• 데스크 Clamp 구성 요소
• VESA 플레이트
• 하드웨어 키트(나사, 와셔, 육각 렌치)
• 케이블 관리 클립

3. 설정 지침

3.1. 데스크 클amp 설치

1. 책상 cl 부착amp base to the main pole of the monitor arm using the provided screws.
2. Position the monitor arm on the edge of your desk.
3. 책상을 꽉 조이세요 clamp screw until the arm is securely fastened to the desk. Ensure it is stable and does not wobble.

3.2. VESA Plate Attachment to Monitor

1. 모니터를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. Identify the VESA mounting holes on the back of your monitor (typically 75x75mm or 100x100mm).
3. Attach the VESA plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.

3.3. Monitor Attachment to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Secure the monitor to the arm by tightening any locking screws or clips as indicated in the assembly diagrams.

3.4. 케이블 관리

Route your monitor cables (power, video, etc.) through the integrated cable management clips or channels on the arm for a tidy setup.

4. 사용 설명서

The monitor arm allows for various adjustments to achieve an ergonomic view경험.

• 높이 조정: Loosen the height adjustment collar on the main pole, move the arm to the desired height, and then re-tighten the collar.
• 기울기 조정: Adjust the tilt angle of your monitor by loosening the tilt screw on the VESA plate, setting the desired angle, and re-tightening.
• 회전 조정: The arm can swivel horizontally at various pivot points. Gently rotate the monitor to the left or right.
• 회전: VESA 플레이트는 360도 회전을 지원하여 세로 또는 가로 방향으로 장착할 수 있습니다.

장력 조정: If the monitor sags or is difficult to move, use the provided Allen key to adjust the tension screw on the arm joints. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor holds its position firmly.

5. 유지관리

• 청소: 모니터 암을 부드러운 천으로 닦으세요.amp 옷감. 연마성 세척제나 용제를 사용하지 마십시오.
• 정기 점검: 모든 나사와 패스너가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.

6. 문제 해결

• 모니터가 처지거나 위치를 유지하지 못함: The tension in the arm joints may be too low for your monitor's weight. Increase the tension using the appropriate Allen key (refer to "Tension Adjustment" in Section 4).
• 모니터를 옮기기가 어렵습니다. The tension in the arm joints may be too high. Decrease the tension using the appropriate Allen key (refer to "Tension Adjustment" in Section 4).
• Arm is Unstable: 책상이 깨끗한지 확인하세요amp is securely tightened to the desk. Check that all assembly screws are properly fastened.

7. 사양

8. 보증 및 지원

For warranty information or technical support, please refer to the documentation provided with your purchase or contact DELTACO GAMING customer service directly. Keep your proof of purchase for warranty claims.