waveshare 10.1DP-CAPLCD

Waveshare 10.1-inch Capacitive Touch LCD IPS Display User Manual

Model: 10.1DP-CAPLCD

1. 서론

This manual provides detailed instructions for the Waveshare 10.1-inch Capacitive Touch LCD IPS Display, Model 10.1DP-CAPLCD. This display features a 1280x800 hardware resolution, a USB Type-C touch port, an HDMI display port, and a 178° viewing angle. It is designed for compatibility with various single-board computers and PCs.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

Image showing the Waveshare 10.1-inch display and all included accessories.

그림 2.1: 패키지 내용물

  • 10.1-inch Capacitive Touch LCD IPS Display
  • USB Type-C Cable (for touch)
  • HDMI Cable (for display)
  • USB Type-C Adapter (B)
  • USB Type-C Adapter (C)
  • HDMI Adapter (A)
  • HDMI Adapter (B)
  • 버튼 보드
  • Speaker Cable (4PIN)
  • Mounting Screws and Stand-offs

3. 주요 특징

The Waveshare 10.1-inch display offers a range of features for versatile use:

Image highlighting the 10.1-inch touch display with HD resolution, multi-point touch, and full color.

Figure 3.1: Display Features Overview

  • 디스플레이 유형: 10.1-inch Capacitive Touch LCD IPS Display
  • 해결: 1280x800 hardware resolution
  • View각도: 178° 초광각 view다양한 위치에서 선명하게 볼 수 있도록 각도를 조절했습니다.
  • 터치 기능: Up to 10-point capacitive touch, depending on the operating system.
  • 내구성: 최대 6H 경도의 강화 유리 패널.
  • 광학적 결합: Enhanced display quality and dust resistance.
  • 오디오: Integrated 3.5mm audio interface and 4PIN speaker interface.
  • OSD 메뉴 : Multi-language On-Screen Display menu for power control, brightness, contrast, and other settings.
  • 호환성:
    • 라즈베리 파이: Supports Raspberry Pi OS, Ubuntu, Kali, WIN10 IoT, Retropie (10-point touch, driver-free).
    • 젯슨 나노: 우분투 운영체제를 지원합니다(싱글포인트 터치, 드라이버 설치 필요 없음).
    • PC: Windows 11/10/8.1/8/7을 지원합니다(10점 터치, 드라이버 설치 필요 없음).

4. 설정 지침

Follow these steps to connect your Waveshare 10.1-inch display to your device.

Image showing connection examples for Raspberry Pi 4B, 3B+, Zero 2W, Jetson Nano, and Mini PC.

Figure 4.1: Connection Examp레

4.1 일반적인 연결 단계

  1. HDMI 케이블을 연결하십시오: Connect one end of the HDMI cable to the display's HDMI port and the other end to your host device (Raspberry Pi, Jetson Nano, PC).
  2. Connect USB Cable for Touch: Connect the USB Type-C cable to the display's touch port and the other end to a USB port on your host device. This provides power for the display and enables touch functionality.
  3. 전원 공급 장치: Ensure your host device is powered on. The display typically draws power via the USB connection. For some setups, an external 5V power supply might be required for the host device.
  4. 오디오(선택 사항): If using external speakers, connect them to the 3.5mm audio jack or the 4PIN speaker header on the display.

4.2 Specific Device Connections

  • Raspberry Pi Zero Series: Additional mini HDMI adapter and USB cable may be required for connection. Ensure adequate power supply (e.g., 5V/2.5A).
  • 젯슨 나노: Connect via HDMI for display and USB for touch. Ensure the Jetson Nano has sufficient power (e.g., 5V/4A).
  • PC: Connect via HDMI for display and USB for touch. The display supports 10-point touch on Windows operating systems without additional drivers.

5. 사용 설명서

5.1 기본 작업

Once connected, the display should automatically detect the video signal from your host device. The touch functionality will be active upon connection to a compatible operating system.

비디오 5.1: 끝view of Waveshare 10.1-inch Display features, including optical bonding, resolution, viewing angle, toughened glass, Raspberry Pi/PC compatibility, 10-point touch, and OSD menu functionality.

5.2 터치 기능

The display supports capacitive touch input. The number of touch points recognized (single-point or 10-point) depends on the operating system of your host device. For Windows and Raspberry Pi OS, 10-point touch is typically supported.

Image demonstrating 10-point capacitive touch and adjustable brightness via software.

Figure 5.2: Capacitive Touch and Brightness Adjustment

5.3 OSD Menu Adjustment

The included button board allows you to access and navigate the On-Screen Display (OSD) menu. This menu provides options to adjust various display settings:

Image showing the interface introduction with labeled ports and display dimensions.

그림 5.3: 인터페이스 소개 및 크기

  • 밝기/대비: Adjust the display's brightness and contrast levels.
  • 전원 제어 : Turn the display on/off or manage power-saving modes.
  • 입력 소스: Select the HDMI input source.
  • 언어: OSD 메뉴 언어를 변경합니다.
  • 다른 설정: Access additional display parameters.

6. 유지관리

디스플레이의 수명과 최적의 성능을 보장하려면 다음 유지 관리 지침을 따르세요.

  • 청소: 부드럽고 털이 없는 천을 살짝 사용하세요.amp디스플레이 표면을 청소할 때는 물이나 화면 세척액을 사용하십시오. 강한 화학 물질, 연마재 또는 과도한 습기는 피하십시오.
  • 손질: Handle the display by its edges. Avoid applying pressure to the screen surface.
  • 저장: 사용하지 않을 때는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
  • 보호: The toughened glass panel offers good protection, but avoid dropping the display or exposing it to sharp objects.

7. 문제 해결

디스플레이에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

  • 디스플레이 없음/검은 화면:
    • Ensure the HDMI cable is securely connected to both the display and the host device.
    • Verify that the host device is powered on and outputting a video signal.
    • Check the power connection to the display (via USB Type-C).
    • Try a different HDMI cable or port on your host device.
  • 터치 기능이 작동하지 않습니다:
    • Ensure the USB Type-C cable for touch is securely connected to both the display and the host device.
    • Verify that your operating system supports touch input and that necessary drivers (if any, though often driver-free) are installed.
    • 호스트 장치를 다시 시작합니다.
  • 해상도/화면 표시 문제:
    • Check your host device's display settings and ensure the resolution is set to 1280x800.
    • Adjust brightness and contrast using the OSD menu.
  • 이미지가 깜빡이거나 불안정함:
    • 모든 케이블이 단단히 연결되어 있는지 확인하십시오.
    • Check for potential electromagnetic interference from other devices.
    • Verify that the power supply to your host device and the display is stable.

8. 사양

Detailed technical specifications for the Waveshare 10.1-inch Capacitive Touch LCD IPS Display:

특징사양
화면 크기10.1 인치
해결1280 x 800 (HD)
디스플레이 패널 유형IPS
종횡비1.59시 1분
View잉 각도178°
터치타입Capacitive, up to 10-point
화면 표면Glossy, Toughened Glass (up to 6H hardness)
이미지 밝기350칸델라/제곱미터
디스플레이 인터페이스HDMI
터치 포트USB 타입-C
오디오 출력3.5mm Jack, 4PIN Speaker Header
제품 치수0.43 x 9.4 x 5.79인치(11 x 239 x 147mm)
품목 무게1.41파운드
제조업체웨이브셰어
모델 번호10.1DP-CAPLCD

9. 지원 및 보증

Waveshare is committed to providing excellent customer support and service for its products.

Image detailing Waveshare's support and service, including material quality, rigorous testing, technical support, and warranty information.

Figure 9.1: Support and Service Overview

9.1 기술 지원

For detailed technical assistance, please refer to the official Waveshare online user manual or contact Waveshare customer support directly. They offer one-to-one technical service and a 24-hour response time.

9.2 보증 정보

Waveshare provides the following warranty and service terms:

  • 무료 교체: 구입일로부터 30일.
  • 무료 수리: 구입일로부터 365일.
  • 기술적 인 지원: 평생 기술 지원.

보증 청구를 위해 구매 증명서를 보관하십시오.

관련 문서 - 10.1DP-CAPLCD

사전view 웨이브쉐어 8DP-CAPLCD 8인치 HD 정전식 터치스크린 IPS 디스플레이
Waveshare 8DP-CAPLCD는 1280x800 해상도의 8인치 HD 정전식 터치스크린 IPS 디스플레이로, Raspberry Pi 및 Windows 기기와 호환됩니다. 이 제품에 대한 자세한 사양 및 사용자 가이드입니다. 광학 본딩, 다양한 입출력 포트, 소프트웨어 캘리브레이션 지침 등의 기능을 제공합니다.
사전view Waveshare 10.1인치 HDMI LCD(G) 사용 설명서: 설정, 사양 및 연결
Waveshare 10.1인치 HDMI LCD(G)와 케이스를 살펴보세요. 이 사용 설명서는 Raspberry Pi, Jetson Nano 및 PC의 필수 사양, 안전 경고, 연결 가이드를 다루고 있으며, 자주 묻는 질문에 대한 답변을 제공합니다.
사전view Waveshare 9.3인치 1600x600 정전식 터치 LCD 디스플레이 - 사양 및 사용 설명서
Waveshare 9.3인치 1600x600 고해상도 정전식 터치 LCD 디스플레이에 대한 종합 가이드입니다. 기능, 사양, 전기적 매개변수, EDID 설정, Raspberry Pi 및 PC 호환성을 위한 자세한 설정 방법을 제공합니다.
사전view Waveshare 5인치 1080x1080 원형 IPS LCD 디스플레이 - 사용자 가이드
Waveshare 5인치 1080x1080 원형 IPS LCD 디스플레이를 살펴보세요. 이 가이드에서는 터치 보정 및 연결을 포함하여 Raspberry Pi 및 Windows PC에서의 기능, 사양, 설정에 대해 자세히 설명합니다.
사전view Waveshare 4.3인치 DSI LCD: 라즈베리파이용 정전식 터치 디스플레이
Raspberry Pi용으로 설계된 800x480 IPS 정전식 터치 디스플레이인 Waveshare 4.3인치 DSI LCD를 살펴보세요. MIPI DSI 인터페이스, 드라이버 없는 설정, 소프트웨어 제어 백라이트가 특징입니다.
사전view Waveshare 10.4HP-CAPQLED: 10.4인치 QLED 터치스크린 디스플레이(1600x720)
1600x720 해상도의 다재다능한 10.4인치 QLED 정전식 터치스크린, Waveshare 10.4HP-CAPQLED를 만나보세요. 이 디스플레이는 Raspberry Pi, Jetson Nano 및 PC와 호환되며, HDMI 및 USB를 통해 뛰어난 시각적 성능과 멀티터치 기능을 제공합니다.