1. 서론
This manual provides detailed instructions for the safe and proper use of your GEEKVAPE L200 Classic Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and safety. The GEEKVAPE L200 Classic is a robust box mod kit featuring an IP68 rating for water and dust resistance, shock resistance, and a maximum output of 200W. It is designed for use with dual 21700 or 18650 external batteries (not included) and includes the Geekvape Z Max Tank.
이미지 1.1: 이상view of GEEKVAPE L200 Classic Kit key features.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.
- 1x GEEKVAPE L200 Classic Mod
- 1x Geekvape Z Max Atomizer (6.0ml)
- 1x Coil Tool
- 1x Spare Parts Pack
- 1x Spare Glass Tube (4.0ml)
- USB 케이블(Type-C) 1개
- 1x Pre-installed Geekvape M Series Coil (0.14Ω, 60-80W)
- 1x Spare Geekvape M Series Coil (0.2Ω, 70-85W)
- 2x 18650 Battery Adapter
Note: Batteries (21700 or 18650) are not included and must be purchased separately.
Image 2.1: Standard Edition Package Contents.
3. 설정
3.1 배터리 설치
- 장치 하단에 있는 배터리 칸 덮개를 엽니다.
- Insert two 21700 batteries according to the polarity markings (+/-). If using 18650 batteries, first insert them into the provided 18650 battery adapters, then insert the adapters with batteries into the device.
- 배터리 덮개를 단단히 닫으세요.
Image 3.1: Battery installation in the L200 Classic Mod.
3.2 Coil Installation and Tank Assembly (Geekvape Z Max Tank)
- Disassemble the Z Max Tank by unscrewing the base.
- Push the desired M Series coil into the tank base until it is firmly seated.
- Reassemble the tank components, ensuring all parts are securely tightened.
Video 3.2: Official introduction to the Geekvape Z Max Tank's leakproof system, demonstrating assembly and coil installation.
3.3 탱크 채우기
- Locate the top cap of the Z Max Tank.
- Twist or slide the top cap to reveal the filling ports.
- Carefully fill the tank with e-liquid through the filling ports. Avoid overfilling the tank or getting e-liquid into the central airflow tube.
- 윗뚜껑을 단단히 닫으세요.
- 새 코일에 액상을 채운 후에는 드라이 히트를 방지하기 위해 처음 사용하기 전에 최소 5~10분 동안 액상이 코일에 충분히 스며들도록 하십시오.
4. 사용 설명서
4.1 전원 켜기/끄기
- To power on the device, press the fire button 5 times rapidly.
- To power off the device, press the fire button 5 times rapidly until the screen indicates power off.
4.2 설정 조정
- Use the '+' and '-' buttons to adjust the wattage or temperature settings.
- To enter the menu and change modes (e.g., Power, TC, TCR, Bypass), press the fire button 3 times rapidly. Navigate using the '+' and '-' buttons and confirm with the fire button.
4.3 A-Lock Function
The A-Lock (Accidental Press Protection Lock) switch is located on the side of the device. Slide the switch up to lock the device, preventing accidental button presses that could lead to overheating or unintended firing. Slide it down to unlock.
Image 4.1: A-Lock switch for accidental press protection.
4.4 부스트 모드
Boost Mode automatically selects the maximum output for increased vapor production. This mode can be activated through the device menu.
Image 4.2: Boost Mode and 1.08-inch Full Screen Display.
4.5 디스플레이 정보
The 1.08-inch full screen displays essential vaping information, including battery level, atomizer resistance, current wattage, 그리고 흡입 횟수.
Video 4.3: A showcase of the GEEKVAPE Aegis Legend 5 Mod kit, demonstrating its design, screen, and overall appearance, which is similar to the L200 Classic.
5. 유지관리
5.1 청소
- Regularly clean the 510 connection and battery contacts with a dry cloth to ensure good conductivity.
- Clean the tank and mouthpiece with warm water. Ensure all parts are completely dry before reassembly.
5.2 코일 교체
Coils should be replaced when you notice a burnt taste, reduced vapor production, or diminished flavor. Follow the coil installation steps in Section 3.2 to replace the coil.
6. 문제 해결
- 기기가 작동하지 않음: Check if the device is powered on (5 clicks of the fire button). Ensure the A-Lock switch is in the unlocked position. Verify that the battery is charged and correctly installed. Check if the atomizer is properly connected and the coil is seated correctly.
- "No Atomizer" Message: This indicates the device is not detecting the tank. Ensure the tank is screwed on tightly and the coil is correctly installed. Clean the 510 connection on both the mod and the tank.
- "Low Battery" Message: 배터리를 충전하거나 교체하십시오.
- 탱크 누출: Ensure all tank components are securely tightened, especially the coil and glass sections. Check O-rings for damage and replace if necessary. Avoid overfilling the tank.
- 탄 맛: This usually means the coil needs to be replaced or was not properly primed. Ensure the e-liquid has fully saturated the coil before use.
7. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 지크베이프 |
| 모델 | L200 클래식 |
| 출력 와트tage | 최대 200W |
| 배터리 호환성 | Dual 21700 or 18650 (with adapter, not included) |
| 탱크 용량 | 6.0ml (Standard), 4.0ml (Spare Glass Tube) |
| 디스플레이 화면 | 1.08인치 풀스크린 |
| 보호 등급 | IP68 방수 및 방진, 충격 방지 |
| 치수 | 13.5 x 8.3 x 7.9cm |
| 무게 | 470그램 |
8. 안전 정보
- This product is intended for adults over the age of 21 only.
- 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
- Do not use if you are pregnant or breastfeeding, have heart conditions, high blood pressure, diabetes, or are taking medication for depression or asthma.
- Use only original GEEKVAPE coils and accessories.
- 장치를 극한의 온도나 직사광선에 노출시키지 마십시오.
- 장치를 분해하거나 개조하지 마세요.
- Always use external battery chargers for optimal battery life and safety.
- 배터리와 기기는 현지 규정에 따라 책임감 있게 폐기하십시오.
9. 보증 및 지원
GEEKVAPE products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included in your product packaging or visit the official GEEKVAPE website. For technical support or service inquiries, please contact your retailer or GEEKVAPE customer service directly.
