SCULPFUN S30 레이저 조각기 사용 설명서

1. 서론

The SCULPFUN S30 is a 5W diode laser engraver and cutter designed for precision work on a variety of materials. It features an automatic air assist system, an industrial-grade X-axis guide rail, and a robust frame, making it suitable for both engraving and cutting tasks. This manual provides essential information for the safe and effective operation of your SCULPFUN S30.

Figure 1.1: SCULPFUN S30 Laser Engraver with examples of engraved and cut materials.

2. 안전 지침

Operating a laser engraver involves inherent risks. Adhere strictly to the following safety precautions to prevent injury or damage.

• 눈 보호: Always wear the provided laser protective eyewear when the machine is in operation. The laser is Class IV and can cause severe eye damage.
• 무인 작동: Do not leave the machine running unattended. Constant supervision is required during operation.
• 통풍: 조각 및 절단 작업 중에 발생하는 연기와 연기를 없애기 위해 통풍이 잘 되는 곳에서 기계를 작동하세요.
• 재료 안전: Only engrave or cut materials specified as safe. Avoid materials that produce toxic fumes or are highly flammable.
• 비상 정지 : 비상 정지 버튼의 위치와 작동 방법을 숙지하세요.
• 어린이와 애완동물: 어린이와 애완동물을 수술 구역에 접근하지 못하게 하세요.

Figure 2.1: The limit switch mechanism, featuring a caution label advising against unattended operation.

3. 제품 특징

The SCULPFUN S30 incorporates several advanced features for enhanced performance and user experience:

• Automatic Air Assist System: Equipped with a 32-bit automatic air assist motherboard and an air pump, intelligently controlled via LightBurn software (M8 button). This system significantly improves cutting efficiency and cleanliness by blowing away debris.
• High-Pressure Air-Assisted Nozzle: Generates a high-pressure airflow of 30L/min, accelerating cutting speed by over 5 times compared to operations without air assist. Ensures clean cut surfaces.
• Industrial X-Axis Guide Rail: Features a precision industrial-grade X-axis guide rail, ensuring stable and accurate engraving and cutting without ripple patterns, even on small details.
• Sturdy and Durable Frame: Constructed from high-strength aluminum alloy, the frame can withstand up to 50KG of weight, ensuring long-term durability and precision. The modular design allows for future laser upgrades.
• 다양한 소재 호환성: Capable of engraving wood, MDF, zigzag, cardboard, plastic, rust, circuit board, aluminum oxide, 304 stainless steel, ceramics, and dark stone. It can cut black acrylic sheet, cardboard, non-woven fabric, bamboo sheet, leather, and certain plastic panels.

Figure 3.1: The automatic air pump, a key component for efficient cutting and engraving.

Figure 3.2: Visual comparison demonstrating the benefits of automatic air assist for clean edges and cuts.

4. 패키지 내용

아래 나열된 모든 구성 요소가 패키지에 들어 있는지 확인하세요.

• SCULPFUN S30 Laser Engraver Frame Components
• 레이저 모듈(5W)
• Automatic Air Assist Pump
• Air Nozzle and Tubing
• 32-bit Air Assist Mainboard
• Limit Switches (X and Y axis)
• 전원 어댑터 및 케이블
• USB 케이블
• Laser Protective Eyewear
• 고정 초점 컬럼
• Samp시험용 재료
• 조립 도구
• 사용 설명서 (본 문서)

그림 4.1: 이상view of all components included in the SCULPFUN S30 package.

5. 조립 설명서

Follow these steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly guide provided in the box for visual instructions.

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내고 포장 내용물 목록과 비교하세요.
2. 프레임 조립: Connect the aluminum alloy frame components according to the diagrams in the separate assembly guide. Ensure all screws are tightened securely.
3. Install X-Axis Guide Rail: Mount the X-axis guide rail onto the frame, ensuring smooth movement.
4. 레이저 모듈 부착: Secure the laser module to the gantry. Connect the necessary cables.
5. Install Air Assist System: Connect the air pump to the air nozzle and route the tubing. Ensure the nozzle is correctly positioned near the laser output.
6. Mount Limit Switches: Install the X and Y axis limit switches. These are crucial for homing and precise positioning. Users can choose to install or not install them based on their needs, but installation is recommended for repeated positioning accuracy.
7. Connect Mainboard: Connect all motor, laser, and limit switch cables to the 32-bit air assist mainboard.
8. 전원 연결: 전원 어댑터를 기기에 연결한 다음 전원 콘센트에 연결하세요.

6. 소프트웨어 설치 및 연결

The SCULPFUN S30 supports various operating software. LightBurn is recommended for full functionality, especially for automatic air assist control.

• 지원 소프트웨어: LightBurn (recommended for M8 air assist control), LaserGRBL, Benbox, GrblController, LiteFire.
• 운영 체제: Supports Windows and MAC systems.
• File 형식: Compatible with NC, BMP, JPG, PNG, DXF, and other image formats.

6.1. 소프트웨어 설치

1. 소프트웨어 다운로드: Obtain the latest version of LightBurn or LaserGRBL from their official web사이트.
2. 드라이버 설치: Follow the software's instructions to install any necessary drivers for your operating system.
3. 소프트웨어 실행: Open the installed software.

6.2. Connecting the Engraver

1. 전원 켜기: Ensure the engraver is powered on.
2. USB 연결: Connect the engraver to your computer using the provided USB cable.
3. 포트 선택: In the software, select the correct COM port for your engraver.
4. 초기 설정 : Follow any on-screen prompts within the software for initial device setup and configuration.

Figure 6.1: The 32-bit air assist mainboard, supporting automatic air assist control and future wireless upgrades.

7. 기본 동작

This section outlines the fundamental steps for engraving and cutting.

7.1. 재료 배치

Place the material to be engraved or cut flat on the working surface. Ensure it is stable and does not move during operation.

7.2. 레이저 초점 맞추기

The S30 uses a fixed focus column and sliding device for focusing. Position the laser module over the material and adjust its height until the laser beam is at its smallest point on the material surface. This ensures optimal engraving and cutting performance.

Figure 7.1: Illustration of the 0.06 x 0.06 mm laser focus and beam shaping technology.

7.3. Preparing Your Design

Import your design into the software (e.g., LightBurn). Adjust parameters such as power, speed, and number of passes according to the material type and desired outcome. For automatic air assist, ensure the M8 command is enabled in LightBurn for cutting operations.

7.4. 작업 시작

Once the design is prepared and the laser is focused, initiate the engraving or cutting process from the software. Monitor the machine closely throughout the operation.

8. 유지관리

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S30.

• 레이저 렌즈 청소: 레이저 렌즈의 품질을 유지하려면 주기적으로 부드럽고 보풀 없는 천과 렌즈 세척액을 사용하여 렌즈를 청소하십시오.
• 잔해물 청소: Remove any accumulated dust, debris, or material residue from the machine's frame, rails, and working area after each use.
• 레일에 윤활유를 바르십시오: Apply a small amount of lubricant to the X and Y axis guide rails periodically to ensure smooth movement.
• 연결 확인: Ensure all electrical and air assist connections are secure and free from damage.
• Air Pump Filter: If applicable, check and clean or replace the air pump filter to maintain optimal airflow.

9. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

10. 기술 사양

11. 보증 및 지원

For warranty information and technical support, please refer to the documentation included with your product or visit the official SCULPFUN web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.